Adc Fiber Optic Panel Fl2000 Series Users Manual Panels (FOP)
FL2000 Series to the manual 2e33c8b3-2769-4e77-bd7c-930ffd5d48ad
2015-02-05
: Adc Adc-Fiber-Optic-Panel-Fl2000-Series-Users-Manual-504761 adc-fiber-optic-panel-fl2000-series-users-manual-504761 adc pdf
Open the PDF directly: View PDF 
.
Page Count: 19
| Download | |
| Open PDF In Browser | View PDF |
FL2000 Series Fiber Optic Panel Introduction Fiber Optic Panels 103743AE • 10/07 Rack Mount Panel Solutions Single Fiber Access Swing-out Bulkhead (Allows Full Access) The FL2000 system is a flexible and modular series of fiber products for today‘s and tomorrow‘s evolving communications and data networks. This product family is a complete line of modular panels developed for rack and wall mounting. The system is fully adaptable to small distribution frames, telephone closet (TC) applications, or active equipment racks. FL2000 panels are designed for both 19- and 23-inch EIA rack or cabinet environments. FL2000 products provide termination, splicing and storage capabilities for in-building cables, outside plant cables and fiber optic terminal (FOT) equipment. FL2000’s modular design offers maximum flexibility to satisfy current needs and future growth requirements. A full line of options and accessories ensures compatibility with existing optical equipment. FL2000 panels accommodate value-added module (VAM) plug-ins, adding flexibilty and functionality to the optical transport system. Splitters, wavelength division multiplexers (WDMs) and other optical components can easily be incorporated. All FL2000 panels accommodate 6pak adapters. 6paks are available in all connector styles and can be ordered as needed. ADC’s removable angled retainers allow easy access for single fiber maintenance. Rack Mount Termination Panel (Empty) Rack Mount Termination/Splice Panel (Empty) FL2000 panels feature superior vertical cable protection and management. Rack mount panels are hinged on one side, allowing full access to the rear of the front bulkhead plate and the interior of the panel. They come equipped with mounting brackets to provide five-inch recess mounting. Mounting brackets are available for virtually any mounting application. Rack mount panels can be wall mounted as well. The FL2000 splice wheel allows easy storage of pigtail and buffer tube lengths and superior bend radius protection. The FL2000 splice deck is available to complete existing installations. Rack Mount Termination Panel (With IFC) www.adc.com • +1-952-938-8080 • 1-800-366-3891 38 FL2000 Series Fiber Optic Panel Introduction Multi-purpose modular solution ideal for cabinet, rack, wall mount or medium size frame applications. Ideal for small to medium fiber counts. Description Termination, termination/splice, storage, splice-only Number of fibers, future growth potential 12 to 96 (up to 192 with LC connectors) Flexibility/ ability to grow Ideal for growth Interconnect Yes Cross-connect Yes Accommodates on-frame splicing Yes. Built-in Accommodates off-frame splicing Yes. IFC cable and assembly available Rear access Not required All-front-access Yes Customer premises application Ideal 19" mounting Yes 23" mounting Yes Cabinet mount Yes Wall mount Yes Mix equipment with fiber product? Ideal Use as dedicated fiber frame Up to 400-fibers only. (See ODF catalog #103742AE) VAM capabilites Yes Optimum jumper storage location Can be configured with storage Vertical cable guide Ships with every panel Rack Mount Panel Solutions Recommended Applications 10/07 • 103743AE Fiber Optic Panels Product Overview www.adc.com • +1-952-938-8080 • 1-800-366-3891 39 FL2000 Series Fiber Optic Panel Fiber Termination/Splice Panel with Adapters or Pigtails Features • Termination and splice panel • Uses ADC’s splice deck or splice wheel • VCG ships with each panel • Uses FL2000 6paks with angled retainers 258 mm (10.1") 498 mm (19.6") Fiber Optic Panels 103743AE • 10/07 Rack Mount Panel Solutions 126 mm (5") 133 mm (5.25") 24-Position Termination/Splice Panel 72-Position Termination/Splice Panel (Shown Empty) Catalog Number FL2 - Panel Capacity 1 2 4 7 9 12-position 24-position 48-position 72-position 96-position C Panel Height 3.5" (2 RU) 5.25" (3 RU) 8.75" (5 RU) 14" (8 RU) 17.5" (10 RU) 0 - Number of Ports Loaded Number of Splice Decks/Wheels Mounting Style3 A C D Connector and Adapter Type Multimode 9 SC 6 LC1 Singlemode 7 SC ultra polish J SC angled polish 2 FC ultra polish 8 LC ultra polish1 B LC angled polish1 Latch Type 0 5 0 2 Pigtail or Adapter Type A Adapter-only Singlemode or multimode 62.5/125 µm P stranded softwall bundle R Singlemode or multimode 62.5/125 µm 12-fiber ribbon C Multimode 50/125 µm stranded softwall bundle 2 3 Latch K1 lock Number of Cable Clamps 2 1 19" standard 19" flush mount 23" centered 1 clamp (standard) 2 clamps Splice Type 0 M W LC connectors and adapters double the capacity of the panel by terminating two fibers at each adapter. 6-fiber softwall bundle except with LC connectors, which uses 12-fiber. Mounting kit shipped unattached if other than standard mounting style. 1 2 3 None or N/A Mechanical (mass fusion)-wheel Heat shrink fusion (single fiber fusion)-wheel Bare fusion Heat shrink fusion (single fiber fusion)-deck Mechanical (mass fusion)-deck Other configurations are available upon request. Please contact ADC Technical Assistance Center. www.adc.com • +1-952-938-8080 • 1-800-366-3891 40 FL2000 Series Fiber Optic Panel Empty Termination/Splice Chassis Features • Mounting - 19-inch EIA racks or cabinets, standard five-inch recess - Wall mounting option available - Other mounting kits available 24-Position Termination/Splice Chassis • Ability to quickly and easily configure, utilizing the 6pak assemblies (ordered separately) • Complete line of accessories including locks for security • Uses ADC splice wheels or splice decks • Ships with vertical cable guide (VCG) 48-Position Termination/Splice Chassis Fiber Chassis Data • • • • Fiber capacity*: 12, 24, 48, 72 & 96 Termination Splice Pigtail storage *Panels can double capacity with LC adapters. 96-Position Termination/Splice Chassis Ordering Information Description Panel Height Catalog Number Empty termination/splice chassis; includes vertical cable guide (VCG) 12-position 24-position 48-position 72-position 96-position 3.5" (2 RU) 5.25" (3 RU) 8.75" (5 RU) 14" (8 RU) 17.5" (10 RU) FL2-12TS350 FL2-24TS525 FL2-48TS875 FL2-72TS140 FL2-96TS175 Splice wheel Heat shrink (single fiber fusion) Mechanical (mass fusion) Heat shrink (single fiber fusion)-24 fiber Bare fusion (24-fiber) FST-DRS12-HS FST-DRS12-MT FST-DRS24-HS FST-DRS24-FT Splice deck Heat shrink (single fiber fusion) Mechanical (mass fusion) Bare fusion FL2-RSPLCE-HS FL2-RSPLCE-MT FL2-RSPLCE-FT www.adc.com • +1-952-938-8080 • 1-800-366-3891 41 Rack Mount Panel Solutions 10/07 • 103743AE Fiber Optic Panels • Hinged on left front side for complete access to interior of termination section FL2000 Series Fiber Optic Panel Fiber Termination Panels with Multifiber Cable (Preterminated) Features • Panels with preterminated multifiber cable (IFC or OSP) ship as a single unit with cable clamp installed • Customizable panels come equipped with customer specified number of adapters, retainers, connectors, cable type and cable length Catalog Number FL2 - __ __ __ 0 __ __ __ __ __ - __ __ __ 0 Panel Type S Singlemode M Multimode • Latch Type 0 5 Panel Capacity Panel Height 1 12-position 1.75" (1 RU) 2 24-position 3.5" (2 RU) 4 48-position 5.25" (3 RU) 7 72-position 8.75" (5 RU) 9 96-position 10.5" (6 RU) U D A C D 2 19" standard 19" flush mount 23" centered Cable Length 008 016 023 031 039 046 061 077 092 122 153 Cable Size 1 Up Down Mounting Style2 Multimode 9 SC 6 LC1 Singlemode 2 FC ultra polish SC ultra polish 7 SC angled polish J 8 LC ultra polish1 B LC angled polish1 1 2 4 7 9 A Latch K1 Lock Cable Exit Direction Connector and Adapter Type 103743AE Fiber Optic Panels Termination Panels (With Multifiber Cable) 10/07 Rack Mount Panel Solutions • Panels with multifiber cable attached save costly installation time 12 24 48 72 96 144 (LC connectors only with 72-position panel) 8 m (25') 16 m (50') 23 m (75') 31 m (100') 39 m (125') 46 m (150') 61 m (200') 77 m (250') 92 m (300') 122 m (400') 153 m (500') Cable Type Multimode C IFC stranded 62.5/125 µm riser Y IFC stranded 50/125 µm riser Singlemode A IFC stranded riser M IFC ribbon riser L OSP armored ribbon (24-fibers and up) LC connectors and adapters double the capacity of the panel by terminating two fibers at each adapter. Mounting kit shipped unattached, if other than standard mounting style. Other configurations are available upon request. Please contact ADC Technical Assistance center. www.adc.com • +1-952-938-8080 • 1-800-366-3891 42 FL2000 Series Fiber Optic Panel Fiber Termination Panels with Adapters or Pigtails Features • Termination-only panel • VCG ships with each panel • Uses FL2000 6paks with angled retainers 498 mm (19.6") 126 mm (5") 133 mm (5.25") 48-Position Termination Panel 72-Position Termination Panel Catalog Number Panel Capacity 1 2 4 7 9 12-position 24-position 48-position 72-position 96-position R Panel Height 1.75" (1 RU) 3.5" (2 RU) 5.25" (3 RU) 8.75" (5 RU) 10.5" (6 RU) Connector and Adapter Type Multimode 9 SC 6 LC1 Singlemode 7 SC ultra polish J SC angled polish 2 FC ultra polish 8 LC ultra polish1 B LC angled polish1 10/07 1 2 3 0 - 0 0 0 Number of Ports Loaded Rack Mount Panel Solutions FL2 - • 103743AE Fiber Optic Panels 257 mm (10.1") Pigtail or Adapter Type2 A Adapter-only P Singlemode or multimode 62.5/125 µm stranded softwall bundle R Singlemode or multimode 62.5/125 µm 12-fiber ribbon C Multimode 50/125 µm stranded softwall bundle Mounting Style3 A C D LC connectors and adapters double the capacity of the panel by terminating two fibers at each adapter. 6-fiber softwall bundle except with LC connectors, which uses 12-fiber. Mounting kit shipped unattached, if other than standard mounting style. 19" standard 19" flush mount 23" centered Latch Type 0 5 Latch K1 lock Other configurations are available upon request. Please contact ADC Technical Assistance Center. www.adc.com • +1-952-938-8080 • 1-800-366-3891 43 FL2000 Series Fiber Optic Panel Empty Termination Chassis Features • Mounting - 19-inch EIA racks or cabinets, standard five-inch recess - Wall mounting option available - Other mounting kits available 24-Position Termination Chassis Fiber Optic Panels 103743AE • 10/07 Rack Mount Panel Solutions • Hinged on left front side; allows full access to rear of front plate and interior of panel • FL2000 6pak adapter plug-ins ordered separately • Equipped with removable metal doors with Plexiglass®1 windows • Designation labels included with each panel • Complete line of accessories including locks for security 72-Position Termination Chassis • Ships with vertical cable guide (VCG) Fiber Chassis Data • Fiber capacity*: 12, 24, 48, 72 and 96 • Termination • Pigtail storage *Panels can double capacity with LC adapters. Plexiglass is a registered trademark of Atoglas Division of Atofina Chemicals, Inc. 1 96-Position Termination Chassis Ordering Information Description Panel Height Empty termination chassis 12-position 24-position 48-position 72-position 96-position 1.75" (1 RU) 3.5" (2 RU) 5.25" (3 RU) 8.75" (4 RU) 10.5" (5 RU) www.adc.com • +1-952-938-8080 Catalog Number • FL2-12RPNL FL2-24RPNL FL2-48RPNL FL2-72RPNL FL2-96RPNL 1-800-366-3891 44 FL2000 Series Fiber Optic Panel Slack Storage Solutions Storage Deck Chassis Mounts with FL2000 termination panels to provide jumper storage. May be wall, rack or cabinet mounted. Storage Deck 1.7 mm patch cord 35 m (115') per deck 3.0 mm patch cord 20 m (66') per deck Storage Deck Chassis Storage Capacity (2 to 4 patch cords per deck) 1.7 mm patch cord 39 m (128') per deck 3.0 mm patch cord 29 m (95') per deck 258 mm (10.1") Ordering Information Description 89 mm (3.5") Catalog Number Storage deck chassis (storage decks ordered separately) 2 storage deck capacity; 89 mm x 483 mm x 258 mm (3.5" x 19" x 10.2") FL2-2RSTORE 6 storage deck capacity; 222 mm x 483 mm x 258 mm (8.75" x 19" x 10.2") FL2-6RSTORE Storage Deck Chassis (Front View) FL2-2RSTORE Rack Mount Panel Solutions 10/07 498 mm (19.6") 126 mm (5") FL2-TR2000 Storage deck Storage Deck (Top View) FL-TR2000 • 103743AE Fiber Optic Panels Storage Capacity (1 patch cord per deck) Horizontal Interbay Management Panel Manages and stores fiber within the frame. Storage Capacity 126 mm (5") Stores up to 137 m (550') using oval storage method 498 mm (19.6") Ordering Information Description Catalog Number Horizontal interbay management panel www.adc.com 133 mm (5.25") • FL2-HZSTORE +1-952-938-8080 Horizontal Interbay Management Panel FL2-HZSTORE • 1-800-366-3891 45 FL2000 Series Fiber Optic Panel Chassis Solutions 498 mm (19.6") 258 mm (10.1") Splice Chassis 126 mm (5") Features 89 mm (3.5") • Offers a combination of splicing protection and associated fiber/pigtail storage Fiber Optic Panels 103743AE • 10/07 Rack Mount Panel Solutions • Splice chassis can be mounted in conjunction with any FL2000 termination panel or as a stand-alone splice panel Splice Chassis • Occupies same footprint and offers same mounting options as FL2000 termination panels • Accepts the ADC splice wheel for efficient management of fiber cable and splice protection Top Side Clear Covers • Accepts the ADC splice deck Splice Deck Bottom Side • Ships with vertical cable guide (VCG) Splice Chip(s) (Heat Shrink Shown) Fiber Chassis Data Splice Wheel • Fiber capacity: 48, 96 & 144 • Splice • Pigtail storage Splice Deck Ordering Information Description Panel Height Splice chassis for use with splice wheel (Only accepts splice wheel) 48-fiber capacity 96-fiber capacity 144-fiber capacity 3.5" (2 RU) 7" (4 RU) 8.75" (5 RU) FL2-48SPNL2 FL2-96SPNL2 FL2-144SPNL2 FST-DRS12-HS FST-DRS12-FT FST-DRS12-MT Splice wheel Heat shrink (single fiber fusion) Bare fusion Mechanical (mass fusion) Splice chassis for use with splice deck (Also accepts splice wheel) 48-fiber capacity 96-fiber capacity 144-fiber capacity Catalog Number 3.5" (2 RU) 7" (4 RU) 8.75" (5 RU) FL2-48SPNL FL2-96SPNL FL2-144SPNL Splice deck Heat shrink (single fiber fusion) Bare fusion Mechanical (mass fusion) FL2-RSPLCE-HS FL2-RSPLCE-FT FL2-RSPLCE-MT Cable clamp kit (kit of 1) Outer diameter 5 mm to 20 mm (0.2" to 0.8") FL2-ACC007 For mounting kits and additional accessories, see pages 48-56. www.adc.com • +1-952-938-8080 • 1-800-366-3891 46 FL2000 Series Fiber Optic Panel Value-Added Module (VAM) Chassis VAM Chassis (Shown Unloaded) FL2-4VAM525 Ordering Information Description Dimensions (HxWxD) Catalog Number 10.5" FL2000 VAM chassis, unloaded; accommodates 9 single plug-in modules 267 mm x 483 mm x 258 mm (10.5" x 19" x 10.1") FL2-9VAM105 7" FL2000 VAM chassis, unloaded; accommodates 6 single plug-in modules 152 mm x 483 mm x 258 mm (7" x 19" x 10.1") FL2-6VAM700 5.25" FL2000 VAM chassis, unloaded; accommodates 4 single plug-in modules 133 mm x 483 mm x 258 mm (5.25" x 19" x 10.1") FL2-4VAM525 Note: The FL2000 VAM system is designed to accept only front access modules; i.e., all input and output adapters, pigtails and/or bare fibers must be located on the front of the plug-in modules. Value-Added Module (VAM) System ADC offers an expansive line of monitor, splitter, WDM and CWDM VAM plug-in modules designed to meet all application needs. Please reference the Value-Added Module (VAM) System Catalog #101663AE for details at www.adc.com or contact ADC Customer Service. www.adc.com • +1-952-938-8080 • 1-800-366-3891 47 Rack Mount Panel Solutions 10/07 • 103743AE Fiber Optic Panels The FL2000 VAM chassis is designed to accommodate ADC VAM plug-in modules in FL2000 installations. The chassis protects and manages optical components and is purchased empty, then loaded with various plug-in modules or blank plates, all of which can be mixed and matched. The chassis can be mounted in 5-inch recess, 19- or 23-inch rack mount, frame and cabinet environments. Vertical cable guides match the vertical cable management features of existing FL2000 system. The chassis accommodates 4, 6 or 9 plug-in modules. FL2000 Series Fiber Optic Panel Panel Accessories – 19-Inch Rack Mount Installation Kits Standard Mount Kit Rack shown for reference Rear Guard Box (optional with some racks) Features 445 mm (17.5") • Panels shipped with - Left-side “L” bracket - L eft-side 2.5" wide vertical cable guide Standard Mount (VCG) 465 mm (18.3") 556 mm (21.9") 127 mm (5") 127 mm (5") d Mount pped) Fiber Optic Panels 103743AE • Other mounting options are available upon request. Please contact ADC Technical Assistance Center. 483 mm (19.6") Standard Mount Kit Ordering Information Description Panel Height Standard mount kit Kit includes: VCG with integrated mounting holes 1.75" (1 RU) 3.5" (2 RU) 5.25" (3 Recess RU) 7" (4 RU) 8.75" (5 RU) 10.5" (6 RU) 14" (8 RU) 17.5" (10 RU) Catalog Number FL2-VCGKIT0175 (12.7 cm) 5" FL2-VCGKIT0350 Mounting Standard FL2-VCGKIT0525 FL2-VCGKIT0700 FL2-VCGKIT0875 FL2-VCGKIT1050 FL2-VCGKIT1400 FL2-VCGKIT1750 Flush Mount Kit 478 mm (18.8") 445 mm (17.5") 404 mm (15.9") Rear Guard Box (optional with some racks) Rack shown as reference 49 mm (1.9") 169 mm (6.7") FLUSH MOUNT 13 mm (5") 13 mm (5") • 10/07 Rack Mount Panel Solutions (as shipped) Flush Mount Kit Ordering Information Description Panel Height Flush mount kit; allows 1", 2" or 4" recess mounting Kit includes: VCG and mounting flanges Rear Guard Box (optional with some racks) 445 mm (17.5") 465 mm (18.3") 556 mm (21.9") 1.75" (1 RU) 3.5" (2 RU) 5.25" (3 RU) Rack shown 7" (4 RU) for reference 8.75" (5 RU) 10.5" (6 RU) 14" (8 RU) 17.5" (10 RU) 127 mm (5") www.adc.com • Catalog Number FL2-FLMT0175 FL2-FLMT0350 FL2-FLMT0525 FL2-FLMT0700 FL2-FLMT0875 FL2-FLMT1050 FL2-FLMT1400 FL2-FLMT1750 127 mm (5") +1-952-938-8080 • 1-800-366-3891 48 FL2000 Series Fiber Optic Panel Panel Accessories – 19-Inch Rack Mount Installation Kits Maximum Mount Kit Allows entire panel to be contained within frame footprint. 556 mm (21.9") 127 mm (5") 74 mm (2.9") 258 mm (10.1") 126 mm (5") New VCG with integrated mounting holes Maximum Mount Kit Ordering Information Description Panel Height Maximum mount kit Kit includes: VCG with integrated mounting holes 1.75" (1 RU) 3.5" (2 RU) 5.25" (3 RU) 7" (4 RU) 8.75" (5 RU) 10.5" (6 RU) 14" (8 RU) 17.5" (10 RU) Catalog Number FL2-19MAX0175 FL2-19MAX0350 FL2-19MAX0525 FL2-19MAX0700 FL2-19MAX0875 FL2-19MAX1050 FL2-19MAX1400 FL2-19MAX1750 10/07 • 103743AE Mounting 127 mm (5") Rack Shown For Reference Rack Mount Panel Solutions 19" Maximum Fiber Optic Panels 445 mm (17.5") 483 mm (19") 465 mm (18.3") 21.88" (55.58 cm) 21.22" 20.28" (53.99 cm) (51.5 cm) 3.02" (76.7 mm) ETSI Bracket Mounting 127.0 mm (5.0") 4.85" (123.2 mm) www.adc.com • +1-952-938-8080 127.0 mm (5.0") • 1-800-366-3891 49 FL2000 Series Fiber Optic Panel Panel Accessories – 23-Inch Rack Mount Installation Kits Wide VCG Mount Kit Allows for increased fiber capacity within the VCG. Rear Guard Box (optional with some racks) 657 mm (25.8") 546 mm (21.5") Rack shown for reference 567 mm (22.3") Wide VCG Mount Kit Ordering Information Description Panel Height Wide VCG mount kit Kit includes: VCG with integrated mounting holes 1.75" (1 RU) 3.5" (2 RU) 5.25" (3 RU) 7" (4 RU) 8.75" (5 RU) 10.5" (6 RU) 14" (8 RU) 17.5" (10 RU) Catalog Number FL2-23VCG0175 FL2-23VCG0350 FL2-23VCG0525 FL2-23VCG0700 FL2-23VCG0875 FL2-23VCG1050 FL2-23VCG1400 FL2-23VCG1750 • 103743AE Fiber Optic Panels 127 mm (5") 10/07 Rack Mount Panel Solutions 127 mm (5") www.adc.com • +1-952-938-8080 • 1-800-366-3891 50 FL2000 Series Fiber Optic Panel Panel Accessories – 23-Inch Rack Mount Installation Kits Centered Mount Kit Allows for standard mounting in a 23-inch rack. 546 mm (21.5") 657 mm (25.8") Rack shown for reference 127 mm (5") 127 mm (5") Extender Bracket Extender Bracket 465 mm (18.3") Centered Mount Kit Ordering Information Panel Height Centered mount kit (with extender brackets) This kit can be used with flush mount brackets (see page 47) to achieve 23" flush mounting, as well as 1", 2" or 4" recess mounting 1.75" (1 RU) 3.5" (2 RU) 5.25" (3 RU) 7" (4 RU) 8.75" (5 RU) 10.5" (6 RU) 14" (8 RU) 17.5" (10 RU) Catalog Number FL2-EB0175P FL2-EB0350P FL2-EB0525P FL2-EB0700P FL2-EB0875P FL2-EB1050P FL2-EB1400P FL2-EB1750P Rack Mount Panel Solutions Description 10/07 • 103743AE Fiber Optic Panels Rear Guard Box (optional with some racks) 567 mm (22.3") www.adc.com • +1-952-938-8080 • 1-800-366-3891 51 FL2000 Series Fiber Optic Panel Panel Accessories 6pak Adapter — Adapters and Pigtails Features • Can be purchased and installed as growth necessitates Fiber Optic Panels 103743AE • • Pigtails consist of a single outer jacket containing six color-coded 900 µm fibers • One end of pigtail terminated with chosen connector style and installed into the 6pak adapters 6pak Adapter (Shown with SC Adapters and Pigtails) • Saves installation time Stranded Multimode Pigtails and Adapters Catalog Number FL2 - 6P __ __ C 6 __ __ __ Connector and Adapter Type 9 SC A FC 6 LC1 Pigtail Length 03W 3 m pigtail 05R 5 m pigtail Fiber Type B Multimode 62.5/125 µm C Multimode 50/125 µm 1 LC 6paks are loaded with 12-fiber pigtails Stranded Singlemode Pigtails and Adapters 10/07 Rack Mount Panel Solutions • Available with preterminated three- or five-meter pigtails Catalog Number FL2 - 6P __ S C 6 __ __ __ Connector and Adapter Type 7 SC ultra polish J SC angled polish 2 FC ultra polish 8 LC ultra polish1 B LC angled polish1 1 Pigtail Length 03W 3 m pigtail 05R 5 m pigtail LC 6paks are loaded with 12-fiber pigtails Other configurations are available upon request. Please contact ADC Technical Assistance Center. www.adc.com • +1-952-938-8080 • 1-800-366-3891 52 FL2000 Series Fiber Optic Panel Panel Accessories 6pak Adapter - Adapters only • C ompletely interchangeable between FL2000 panel, FL1000 rack and wall box products • Can be ordered with all standard types of adapters and connectors • Feature ADC‘s removable angled retainers which provide superior fiber management • No tools required to install into FL2000 and FL1000 products • Can be ordered with adapters only or for quick and easy installation, with preterminated three- or five-meter pigtails 6pak Adapter (Shown with Singlemode Simplex Adapters) 6pak Adapter (Shown with Multimode Simplex Adapters) Ordering Information Multimode SC FC LC* FL2-6PMMSC FL2-6PMMFC FL2-6PMMLC Singlemode SC ultra polish SC angled polish FC ultra polish LC ultra polish* LC angled polish* FL2-6PSMSC FL2-6PSMASC FL2-6PSMFC FL2-6PSMLC FL2-6PSMALC 6pak blank plug-in FL2-6PBLNK Rack Mount Panel Solutions Catalog Number Description 6pak Adapter Blank * LC 6pak adapter accommodates 12 LC connectors. 10/07 • 103743AE Fiber Optic Panels Features Other configurations are available upon request. Please contact ADC Technical Assistance Center. www.adc.com • +1-952-938-8080 • 1-800-366-3891 53 FL2000 Series Fiber Optic Panel Panel Accessories Splice Wheel and Splice Deck Top Side Fiber Optic Panels Splice Deck Bottom Side Splice Wheel Splice Chip(s) (Heat Shrink Shown) Splice Wheel Splice Deck • 103743AE Ordering Information 10/07 Rack Mount Panel Solutions Clear Covers Description Catalog Number Splice wheel Heat shrink (single fiber fusion) Bare fusion Mechanical (mass fusion) Splice deck Heat shrink (single fiber fusion) Bare fusion Mechanical (mass fusion) FST-DRS12-HS FST-DRS12-FT FST-DRS12-MT* FL2-RSPLCE-HS FL2-RSPLCE-FT FL2-RSPLCE-MT* *For use with ribbon fiber www.adc.com • +1-952-938-8080 • 1-800-366-3891 54 FL2000 Series Fiber Optic Panel Panel Accessories Miscellaneous Rubber Grommets Clamp Bracket Cover Clamp Yokes (2) Plate Nuts (2) Cable Clamp Kit Interbay Management Panel E-501-L139 Blank VCG FL2-BLNKFULL0875 2.14 m (7') Catalog Number Description 305 mm (12") Lock Key lock #1; includes lock and key #1 Key lock #2; includes lock and key #2 64 mm (2.5") End Guard UEGP-7PW IPA-K1 IPA-K2 End guard (H x W x D) 2.14 m x 64 mm x 305 mm (7' x 2.5" x 12"); right or left side UEGP-7PW Interbay management panel 2 .14 m x 127 mm (7' x 5") mounts to a standard (19" or 23" rack) E-501-L139 Lower cable trough (H x W x D) 356 mm x 483 mm x 127 mm (14" x 19" x 5") 178 mm x 483 mm x 127 mm (7" x 19" x 5") FL2-ACC011 FL2-ACC012 Bonding grounding kit: kit of 1 FL2-ACC006 FL2-ACC007 FL2-ACC033 Blank VCG to add cable management to frame not fully loaded 3.5" 8.75" 10.5" FL2-BLNKVCG0350 FL2-BLNKVCG0875 FL2-BLNKVCG1050 Blank VCG with blank panel for aesthetics 3.5" 5.25" 7" 8.75" 10.5" FL2-BLNKFULL0350 FL2-BLNKFULL0525 FL2-BLNKFULL0700 FL2-BLNKFULL0875 FL2-BLNKFULL1050 Cable clamp kit: kit of 1 Outer diameter 5 mm to 20 mm (0.2" to 0.8") 356 mm (14") Lower Cable Trough FL2-ACC011 Cable clamp kit for use with 12-fiber termination or termination/splice panels Rack Mount Panel Solutions • 10/07 Bonding/Grounding Kit Ordering Information 103743AE Fiber Optic Panels Locks 178 mm (7") Lower Cable Trough FL2-ACC012 www.adc.com • +1-952-938-8080 • 1-800-366-3891 55 FL2000 Series Fiber Optic Panel Panel Accessories Ordering Information for Patch Cords and Attenuators Fiber Optic Panels 103743AE • 10/07 Rack Mount Panel Solutions ADC offers a comprehensive line of cable assembly and accessory products including patch cords, IFC assemblies, attenuators, FasTerm® connectors and adapters to meet the demanding needs of today’s network. Please refer to the Fiber Cable Assemblies Catalog #102880AE at www.adc.com for more detailed information. For your convenience, ordering information for patch cords and attenuators can also be found on pages 80-85. www.adc.com • +1-952-938-8080 • 1-800-366-3891 56
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:08:23 Modify Date : 2007:10:18 13:04:14-05:00 Create Date : 2007:10:17 13:15:11-05:00 Metadata Date : 2007:10:18 13:04:14-05:00 Creator Tool : Adobe InDesign CS3 (5.0) Format : application/pdf Title : Fiber Optic Panels (FOP): FL2000 Series Fiber Optic Panel-103743AE_03 Creator : Document ID : uuid:8755657b-f297-d649-84e9-f45c207b3652 Instance ID : uuid:680c6f2e-7523-5949-9bb0-58152e51f105 Producer : Adobe PDF Library 8.0 Has XFA : No Page Count : 19 Warning : [Minor] Ignored duplicate Info dictionaryEXIF Metadata provided by EXIF.tools