Addvalue Communications GCXC1C XBOX 2.4 GHz Game Controller User Manual xc1 ugRev2 FH10

Addvalue Communications Pte Ltd XBOX 2.4 GHz Game Controller xc1 ugRev2 FH10

Users Manual

Download: Addvalue Communications GCXC1C XBOX 2.4 GHz Game Controller User Manual xc1 ugRev2 FH10
Mirror Download [FCC.gov]Addvalue Communications GCXC1C XBOX 2.4 GHz Game Controller User Manual xc1 ugRev2 FH10
Document ID378083
Application IDUYr9jp1Gpyaotmij6LF/BA==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize11.29kB (141074 bits)
Date Submitted2003-12-03 00:00:00
Date Available2003-12-03 00:00:00
Creation Date2003-11-21 10:21:06
Producing SoftwareAcrobat Distiller 5.0 (Windows)
Document Lastmod2003-11-28 15:02:45
Document Titlexc1_ugRev2.FH10
Document CreatorPScript5.dll Version 5.2
Document Author: Kelvin

USER GUIDE
TM
TM
Thank you for purchasing Wideye XC1 Wireless Game Controller for XBOX . With
advance wireless 2.4GHz Frequency Hopping radio frequency technology and superior
Lag-Free performance, you will be playing comfortably anywhere in the room while
maintaining complete control over your gaming experience. For safe operation of
this product, please read this guide and the instructions of your game system carefully
before use.
Package Contents
§
§
§
§
Wireless Game Controller x 1 unit
Base Unit Receiver x 1 unit
User Guide x 1 unit
Warranty Card x 1 unit
Figure 1
Base Unit
Wireless Game Controller
User Guide
Version 1.0
TM
About your Wideye XC1
TM
TM
Wideye XC1
TM
Wireless Game Controller for XBOX
Your Wideye XC1 retail package contains a Controller and a Base Unit, as shown in
Figure 1
The functions of the buttons and LED of the Controller are illustrated in Figure 2.
Left Stick
D Pad
Back Button
Start Button
Y Button
X Button
B Button
A Button
Figure 2
www.wideye.com.sg
Black Button
White Button
Right Stick
On/Off Switch
LED Indicator
Power Saving Mode
Right Button
Left Button
Battery Compartment
If the Controller is not being used for 2.5 minutes, it will be partially turned off and
go into “Sleep” mode to conserve battery consumption. To wake up the Controller
from “Sleep” mode, simply press any of the buttons. If the Controller is not to be used
for a long period of time, it is advisable to remove the batteries from the battery
compartment.
Battery Life Indicator
If the installed batteries are weak, the LED will start to blink. Replace the batteries
immediately.
Expansion Slot
Expansion Slot
Link Button
Cautions
§
XBOX Connector
XA1 Slot
Registration
TM
Wideye XC1 Wireless Game Controller is pre-registered in the factory for excellent
out-of-box experience. However, if you encounter interference during usage, please
follow the steps below to re-register the unit:
a. Ensure that the Controller is switched “OFF” before proceeding
b. Insert three (3) AA betteries into the battery compartment of the Controller
c. Hold the BACK and START buttons down simultaneously and switch the Controller
“ON”
d. The green LED shall blink, which indicates that the Controller has entered into
the registration mode
TM
e. Hold the LINK button of the Base Unit down and insert the XBOX connector
into the console; release the LINK button after the insertion
f. When the Controller and Base Unit are linked, the Controller’s LED will turn ON
for a while and turn OFF again
After the registration, this product is ready for use.
Controller Neutral Position Reset
If the Left or Right Button are pressed, or the Left or Right Stick are moved out of neutral position
when the power is turned ON, these positions will be set as the neutral position, causing incorrect
control during game play.
To reset the controller, release all buttons and sticks to allow them to return to the
correct neutral position, then turn the power of the Controller OFF and ON.
§
§
§
§
§
§
§
§
§
§
TM
Do not expose the Wideye XC1 Wireless Game Controller to high temperature,
high humidity or direct sun light
Do not use benzine, thinner or other chemicals to clean the product. If you wish
to clean the product, please use a soft dry cloth
Do not attempt to disassemble or modify the product
If you feel tired, or experience discomfort or pain in your hands or arms while
using this product, please stop immediately. If the condition persists, consult your
doctor
Do not operate this product in any other way except with your hands. Do not
bring the Controller close to your head, face or near the bones of any part of
your body
Do not use the vibrating function of this product if you have any ailment of the
bones, or joints of your hands and arms. This may aggravate the injuries
Avoid prolonged use of this product. Take a break in every 30 minutes
Do not insert the batteries wrongly
Misuse of batteries may cause them to leak or explode that may result in injuries
Keep this product out of reach from children under the age of three (3). This
product contains tiny components, which may cause choking if swallowed
If the product is hot or perform abnormally, stop using it immediately
FCC Information
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1) This equipment may not cause harmful interference
2) This equipment must accept any interference received including interference
that may cause undesired operation
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate
this equipment.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for
an uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter.


Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Copy, Fill forms, Extract, Assemble, Print high-res
Create Date                     : 2003:11:21 10:21:06Z
Modify Date                     : 2003:11:28 15:02:45+08:00
Page Count                      : 4
Creation Date                   : 2003:11:21 10:21:06Z
Mod Date                        : 2003:11:28 15:02:45+08:00
Producer                        : Acrobat Distiller 5.0 (Windows)
Author                          : Kelvin
Metadata Date                   : 2003:11:28 15:02:45+08:00
Creator                         : Kelvin
Title                           : xc1_ugRev2.FH10
Has XFA                         : No
EXIF Metadata provided by EXIF.tools
FCC ID Filing: QY9-GCXC1C

Navigation menu