Ademco 8DL5802CP-1 security panic pendant transmitter User Manual N6555 RevC

Download:
Mirror Download [FCC.gov]
Document ID	582493
Application ID	Xe11T8rJssFu28O4cRBOHQ==
Document Description	II with fcc part 15 statment and fcc id
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	1.94kB (24262 bits)
Date Submitted	2005-09-15 00:00:00
Date Available	2005-10-14 00:00:00
Creation Date	2005-09-14 14:22:54
Producing Software	Acrobat Distiller 6.0 (Windows)
Document Lastmod	2005-09-14 14:22:54
Document Title	Microsoft Word - N6555_RevC.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	E650365

Honeywell, Inc.
ADEMCO 5802CP BELT CLIP TRANSMITTER
INSTALLATION AND SETUP GUIDE
About The 5802CP:
The ADEMCO 5802CP is a belt clip style
Emergency wireless transmitter that may
be worn on a belt or carried in a pocket or
purse. Pressing the button on the
transmitter (for at least one second) will
send an alarm signal to the control
receiver. The 5802CP is intended for use
only with wireless alarm systems that
support 5800 series devices. The control
receiver’s response to the 5802CP signal
can be set for either 24-hour audible
alarm
or 24-hour silent alarm by appropriate
programming of the control receiver. The
5802CP is powered by a non replaceable
Lithium battery designed to provide long
life. The entire 5802CP should be
replaced when a low battery condition is
indicated by the control unit.
Programming The Serial Number:
The 5802CP has a unique identification code
(serial number) permanently assigned during
manufacture. You must enroll the transmitter’s
serial number into the control panel. All
5802CP transmitters shall be programmed as
“BR” type units (i.e., unsupervised “Button
RF”).
Note: During the enrollment procedure, two
transmissions must be sent (by pressing the
button). Allow at least 8-seconds between
transmissions. See the control panel’s
Installation and Setup Guide for further
details regarding possible zone
responses and programming.
FCC ID: CFS8DL5802CP-1
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference (2) This device must accept
any interference received, including interference that may cause undesired operation.
IC: 573F-5802CP1
Specifications Unit Dimensions: 2-5/8” (67mm) x 1-1/2” (38mm) x 1” (25.4mm)
LED: Lights when unit transmits.
REFER TO THE INSTALLATION INSTRUCTIONS FOR THE RECEIVER/CONTROL WITH WHICH THIS DEVICE IS
USED FOR WARRANTY INFORMATION AND FOR DETAILS REGARDING THE LIMITATIONS OF THE ENTIRE ALARM
SYSTEM.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 1
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:76917fc6-8727-4fa1-9199-03928d71bd40
Producer                        : Acrobat Distiller 6.0 (Windows)
Create Date                     : 2005:09:14 14:22:54-04:00
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2005:09:14 14:22:54-04:00
Document ID                     : uuid:591d2ce4-2da8-4b61-93bc-2a2c87c70a37
Format                          : application/pdf
Title                           : Microsoft Word - N6555_RevC.doc
Creator                         : E650365
Author                          : E650365

EXIF Metadata provided by EXIF.tools