Ademco 8DL5816MN2 Security / Remote Control Transmitter User Manual II with FCC lable and ID number

Honeywell International Inc. Security / Remote Control Transmitter II with FCC lable and ID number

Contents

  • 1. II with FCC lable and ID number
  • 2. II with FCC lable and ID number

II with FCC lable and ID number

Download: Ademco 8DL5816MN2 Security / Remote Control Transmitter User Manual II with FCC  lable and ID number
Mirror Download [FCC.gov]Ademco 8DL5816MN2 Security / Remote Control Transmitter User Manual II with FCC  lable and ID number
Document ID107045
Application IDVq1v78a5swzE/5qyDCxhwA==
Document DescriptionII with FCC lable and ID number
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize11.87kB (148435 bits)
Date Submitted2000-06-28 00:00:00
Date Available2000-09-01 00:00:00
Creation Date2000-06-27 16:56:23
Producing SoftwareAcrobat Distiller 4.05 for Windows
Document Lastmod2000-06-27 16:56:30
Document TitleII with FCC lable and ID number

DEMCD “(5503 5m”
Pfellmmary INSTALLATION 5815
6/14/00 tp IN STRU CTI o N S DOORNVINDOW TRANSMITTER
MR (AI-YERNATE POSWON
cwEva-orrstcrr mg mm
0.00? Il
mam w
if?“ wow {5st
RELEASE
ohm rum
MIGNET MW"
(ovum
SEPARATELY) K:
COVER
REWNlNG
HOOKS
(3 “7:52 msnt.
MOUNVINB HATE CASE ”W" m (L009 7, OWE-R
minim;
Flgure 1. Mounting Plan and Case News [3]
GENERAL INFORMATION
Each 5315 Door/Mmow Ynnsmmer has its will untque
serial number pennanerlliy eeeigned during
rrlanu'actule. me mlllrol It" NQHM In "Ian the
lmmmlflef ID at some WM prior lo its usage in the
alarm syslem. Rotor lo the ooniroi unini lneielleuon
lnatniotlom tor iunner details. Node: Dunno
programming oi me control unll. 5515 transmiflm
should be heated ae “RF“ 9. eupenneed an Type
(meridnory by UL iii-wisdom
The 5315 can send In? unique codes. the outlet e
wired dnud circm contact loop and the "who tor he
ouitl-in reed ewnch (used in oonlunaion with a magnet
as deemed below). A wired loop end/or reed switch
Mybeused. Fautmmmamamymtoe
more man i feet from the emitter,
The 5515 includes a lid in oover tamper whim is
aoo‘vated when the cover is removed.
MOUN'HNG
Forproperorierroitionotmeonitiirrelatiantome
mom'ng plate. loop wiring end/or magnet. And all of
bite aeolian beloia Wing the unit
the desorlpiion that follows ltsumal that the unit will be
mounted u snawn In the diagram, with lhe megnel (n
uaed) loo-lad in one oi the poahions enwn i Figure 2,
The iaiit may. Mel/cf. be Matted in anydireouon. as
long as the relationship of the untl to its mounting plate
and (it used) magnet la maintained.
Alttongh the unit can be mounted drealy lo a nirtaee. it
is Nmflw that he "naming piste be um, (or
erase in naming the unit for eeivibing should ll beoorrle
neoeeeaiy.
Before inounong the earmitterpeirrranenthr, eonduot
Gomo Go dam (m ooimors limo-niche) to verify
adequate signai mm and reorient or teloeete me
mmirneeeuary.
1. Remove the mmhl-rn lee eever oy inaening
the III! blade oi a urn-it eorewdnver into the pry-oil
eloialoneendollheuniumng. t iorlooeoon).
and align!” twisting the blade until the com
dungeon.
Flynn 2. 5815 {shown wltllout collar)
2. Dlww bile attached mourning plum lrom the
ease by inserting the blade oi a smell soiewdnver
irilo the locking lab release window (see Figure l)
and pressing h against the locking lab (also shown
bi Fig. 1), whle eliding tne mounting ptale upward
along the oaee back until tree,
5. lint-ll the moumlng plate, with as two case-
holding pools pointing up (in example). in lhe
looalion selected as described in me oohttdt panel's
mllahon imtniotiolle. use the flat head screws
swplied.
Nose: li a wired ooiltaol loop is to be used. with
eonoeeted wiring, the wire exit hole in the wall
should be In the location shown in Figure 1. and no
men than 1/4" in diam-tan
4. hawlnd oer-tut loop laoetze uud, teed
oonoealed wiring through the stat in the cue back,
bul do not connect «a the terminal Mock yel. For
smeee wiring elwy. Mo lnln -bieakout' areae are
ptvvtded in the wee wall.
5 mmuubecktomemwmplmbv
sliding the keyhole slots in me eaee back mu onto
the mounting plate'e ceee holding podul. The
Iockblg lab will ollohaa the use M locks in place.
& noneonhemdwltcheslntmunhtsmbe
ueed, a No. 5899 Magnet (obtain sepamtely)
should be mourned adieoem lo the reed switch. or
adiaoemlolhetopoflhecaeteee Fig. 2).
LOOP WIRING CONNECTIONS (ll used)
With the baltery et- not lneetted, oorineol the oorilect
loop wires to the union loog ienninale ieee Fig 2).
MW
The comet loop M uul otooed areuit demon The
loop ruponu lime ii a noirfiial 100mm,
momtllneoonlaollooplsnollooeueed, no
oollneoiio ”a needed acme: the loop tennlnalo.
(mlinlud)

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Create Date                     : 2000:06:27 16:56:23
Producer                        : Acrobat Distiller 4.05 for Windows
Modify Date                     : 2000:06:27 16:56:30-04:00
Page Count                      : 1
EXIF Metadata provided by EXIF.tools

II with FCC lable and ID number

Download: Ademco 8DL5816MN2 Security / Remote Control Transmitter User Manual II with FCC  lable and ID number
Mirror Download [FCC.gov]Ademco 8DL5816MN2 Security / Remote Control Transmitter User Manual II with FCC  lable and ID number
Document ID107046
Application IDVq1v78a5swzE/5qyDCxhwA==
Document DescriptionII with FCC lable and ID number
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize5.98kB (74755 bits)
Date Submitted2000-06-28 00:00:00
Date Available2000-09-01 00:00:00
Creation Date2000-06-27 16:40:21
Producing SoftwareAcrobat Distiller 4.05 for Windows
Document Lastmod2000-06-27 16:40:25
Document TitleII with FCC lable and ID number

BATTERY INSTALLATION/REPLACEMENT
to Runrm the tnnunlttm‘a com in it is not al-
ready on) as described In MOUNTING SIep 1.
2. Ohm. correct pollmy Ind lnurt tM bmry
prorioeo into the natury holder (see Fig. 2), Take
SPECIFICATIONS
Dlmlnfiofll:
1-1I2'W x TH K 7/81)
(36mm x 75mm x 22mm)
RIM: 3V L'lhium (see Note in step 2 of BATTERY
INSTALLATIOMREPLACEMENT)
are not In bend me antenna, r“
”on; Replace “New “you”, ; E BATTERY CAUTION Rlak of fire, ”mimic
Par-norm cnrzsA. Duracell puzzle i and buml. Do not recharge. alumni-
Sanyo can», van, cmzsA, or I nut above m's (1 we) or Inclnurale
ADEMCO res. ! Dispose or und button-r prompuy.
a. To replace the sour, engage the hooks along I
one edge and snap slml.
TO THE lNSTALLER
Regular maintenance and inspection (at least annually) by the installer and frequent testing by the user are vnal lo
continuous mammary operation or any alarm system.
The installer should assume the responsibility or developing and onennq a regular mannenanoe program lo tne user.
as well as aoouarnuno iris uw with the proper operalion and I'rrnitatiom Mme alarm system and its component parts.
Recommendations muel be Included lor a specific program or Irequent rearing (at least weekly) to insure the system's
nperatron at all times.
REFER TO THE INSTALLATION INSTRUCTIONS FOR THE RECEIVERICONTROL WITH WHICH
THIS DEVICE IS USED, FOR DETAILS REGARDING LIMITATIONS OF THE ENTIRE ALARM
SYSTEM.
ADEMCO LIMITED WARRANTY
Alarm Device Manufacturing Company, a Division or Funny Corporation. and Its divisions subsidiaries
and affiliates (‘Seller”). 155 Eileen Way. syosset. New York 11791, warrants its products to be in
can'ormance with Its own plans and specificanorrs and to be free from detects In materials and
workmanship under normal use and service tor 18 months trorn the date sump control on the product or,
for products not having an ADEMCO date stamp, (or 12 months Irorn date or original purchase unless the
installation Instruaiona or catalog sets forth a shorter period. In which case the shorter period shall apply.
Seller‘s obligation shall be limited to repalnng or replacing, at no option. tree or charge for materials or
labor. any product which Is proved not in compliance with Sellers specifications or proves defective In
materials or workmanship under normal use and service, Seller shall have no ohllgation under this Limited
Warranty or otherwise it the product ls altered or Improperly repaired or serviced Ivy anyone other than
ADEMCO factory servicet For Winanty service, return product transportation prepaid, to ADEMCO Factory
Service. 165 Eileen Way, Syossel, New York 11791.
THERE ARE NO WARRANTIES, EXPRESS OR IMFLIED, OF MERCHANTABILITY, OR FITNESS FOR A
PARTICULAR PURPOSE OR OTHERWISE. WHICH EXTEND BEYOND THE DESCRIPTION ON THE
FACE HEREOF. IN NO CASE SHALL SELLER BE LIABLE TO ANYONE FOR ANY CONSEQUENTIAL
OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY. EXPRESS OR
IMPIJED, OR UPON ANY OTHER BASIS OF LIABILITY WHATSOEVER. EVEN IF THE LOSS OR
DAMAGE IS CAUSED BY THE SELLER'S OWN NEGLIGENCE OR FAULT
Seller does not represent that the products It sells may not be compromised or dreumvented: that the
products will prevent any personal Injury or property loss by burglary. robbery, fire or otherwise; or that the
products W!" in an cases pmvlde adequate wemlng or protection Customer understands that a properly
installed and maintained alarm may only reduce the risk or a burglary, robbery, lire or other events
occurring without providing an alarm, but it is not insurance or a guarantee that such will not occur or that
there will be no personal injury or properly loss as a resulL CONSEQUENTLY. SELLER SHALL HAVE NO
LIABILITY FOR ANY PERSONAL INJURY, PROPERTY DAMAGE OR OTHER LOSS BASED ON A
CLAIM THE PRODUCT FAILED TO GIVE WARNING. HOWEVER. IF SELLER IS HELD LIABLE.
WHETHER DIRECTLY OR INDIRECTLY. FOR ANY LOSS OR DAMAGE ARISING UNDER THIS LIMITED
WARRANTY OR OTHERWISE, REGARDLESS OF CAUSE OR ORIGIN, SELLER’S MAXIMUM LIABILITY
SHALL NOT IN ANY CASE EXCEED THE PURCHASE PRICE OF THE PRODUCT. WHICH SHALL BE
THE COMPLETE AND EXCLUSIVE REMEDY AGAINST SELLER. Thle warranty replaces any previous
warranlles end is the only warranty made by Seller on this product. No increase or alteration written or
verbal, of the obligaflofls of Ihia Limited Warranty Is authorized.
THIS DEVICE COMPLIES WITH PART 15 OF FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING
TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE
MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE
UNDESIRED OPERATION
FCC ID2CFSSDL5816MN2
ADEMCD
GROUP
185 Eileen Way, syosset, New York 11791
Copyright O 2000 Piliway Corporation

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Create Date                     : 2000:06:27 16:40:21
Producer                        : Acrobat Distiller 4.05 for Windows
Modify Date                     : 2000:06:27 16:40:25-04:00
Page Count                      : 1
EXIF Metadata provided by EXIF.tools
FCC ID Filing: CFS8DL5816MN2

Navigation menu