Ademco 8DL5817CB-1 Security Remote Transmitter User Manual Full page fax print

Download:
Mirror Download [FCC.gov]
Document ID	589697
Application ID	ZS8Nmfa+Tv7fH58JoFyyqQ==
Document Description	II with part 15 statment and fcc id
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	62.44kB (780476 bits)
Date Submitted	2005-10-08 00:00:00
Date Available	2005-11-22 00:00:00
Creation Date	2005-10-06 16:48:46
Producing Software	Acrobat Distiller 6.0 (Windows)
Document Lastmod	2005-10-06 16:49:32
Document Title	Full page fax print
Document Creator	PScript5.dll Version 5.2
Document Author:	E650365

ADEMCO LIMITED WARRANTY
Alarm Device Manufacturing Company, a Division of meay Corporation, and us divisions,
subsidiaries and affillales ("Seller“), 165 Eileen Way, Sycssel, New York 1179]. warrants its
products io be in conformance wilh its own plans and specifications and to be free from defects
in malol'inls and workmanship under normal use and service for 18 months from lhe dale smp
control on the product or, for products not having an Adcmco date stamp, for 12 months from
dale of original purchase unless Ihe installation inslruclions m' catalog sols forth a shoner
per-rod. in which case the shorter period shall apply Sellers obligzuoil shill] be hmiled to
repairing or replacing, at its option, free ofcharge for materials or labor, any product which is
proved not in compliance with Seller's specifications or proves defective in materials or
workmanshlp under numlltl use and service. Seller shall have no obligalion undcr this limited
Warranty or otherwise if the product is altered or improperly repaired or San/iced by anyone
oincr than Adcmco factory service. For warranty service, ietum product tiansponarion prepaid,
to Ademco Factory Service, 165 Eileen way, Syosser, New York l 1791.
THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, OF MERCHANTABILITY, OR
FITNESS FOR A PARTICULAR PURPOSE OR OTHERWISE, WHICH EXTEND
BEYOND THE DESCRIPTION ON THE FACE HEREOF. IN NO CASE SHALL SELLER
BE LIABLE TO ANYONE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES
FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, OR
UPON ANY OTHER BASIS OF LIABILITY WHATSOEVER, EVEN IF THE LOSS OR
DAMAGE IS CAUSED BY THE SELLER'S OWN NEGLIGENCE OR FAULT.
Seller does not represent that the producls it sells my not be compromised or eiicnmvented;
lhal the products will prevent any personal injury or property loss by burglary. robbery, fire or
mhcrwlsc; or that the products will in all cases provide adequate warning or protection.
Customer understands that a properly installed and maintained alarm may only reduce the fish
of a burglary, robbery. fire or other events occuning without providing an alarm, bill it is not
insurance or a guamnlee that such will not occur or that there will be no personal injury or
property loss as a result CONSEQUENTLY. SELLER SHALL HAVE NO LIABILITY FOR
ANY PERSONAL INJURY, PROPERTY DAMAGE OR OTHER LOSS BASED ON A
CLAIM THE PRODUCT FAILED TO GIVE WARNING. HOWEVER, IF SELLER IS
HELD LIABLE, WHETHER DIRECTLY OR INDIRECTLY, FOR ANY 1035 OR
DAMAGE ARISING UNDER THIS LIMITED WARRANTY OR OTHERWISE.
REGARDLESS OF CAUSE OR ORIGIN, SELLER‘S MAXIMUM LIABILITY SHALL NOT
IN ANY CASE EXCEED THE PURCHASE PRICE OF THE PRODUCT, WHICH SHALL
BE THE COMPLETE AND EXCLUSIVE REMEDY AGAINST SELLER This warranty
replaces any previous warranties and is the only wammy made by Seller on this product. No
increase or alteration. wnllen or verbal. of the obligations of this Limited Warranty is
aurhoriued.
FCC NOTICE
FCC ID: ('l-‘hhl)l.§Xl7('I-H
This device eornplias with Part 15 of FCC rules. Operation is subject to the
following two conditions: (1) This devioe may not cause harmful iuterferenoa, (2)
This device must accept any interference received, including interference that may
cause undesired operation.
I(':573I'15x|7('BI
ADEMGD
Honeywell luternational Inc.
155 Eileen way, Syossel, New York 11791
I|||IIII|II|IIlI|II||II|I
K5623 8/00
aADEMCO
Ksszs woo
5817CB
WIRELESS
COMMERCIAL TRANSMITTER
INSTALLATION INSTRUCTIONS
GENERAL INFORMATION
The 581708 Wireless Commercial Transmitter is a dour- or window»mounted burglary
transmitter. Upon activation, it emits an RF signal lo a control panel that, in turn,
sends a burglary or fire alarm to the oentral station. The 551708 has three unique
input loops (zones). The first loop (primary loop) is supervised and typically used for
high~priority alarm reporting such as fire. It requires to 470K ohm end-of-line resistor
to be placed across the sensor. The second loop is the built—In normally closed reed
switch (used in conjunction with a magnet, as described below). The third loop is
another normally closed burg loop. All three loops may be used. A fourth (automatically
enrolled) loop wntains two tamper switches to protect the 6817CB transmitter. A built—
in cover tamper switch is activated when the cover is removed. A unit tamper switch is
activated if the unit is separated from its mounting plate.
The 581705 has its own unique serial number permanently assigned during
manufacture. A control panel is required to "enroll" this transmitter serial number at
some point prior in its usage in the alarm system. Refer to the control panel's
installation instructions for further details. For UL installations. a sensor and its
wiring may not be more than 3 feet from the transmitter. Note: During prograrruning or
the control panel, 5817CB transmitters are treated as “RF" (i.e., supervised RF) Type
(mandatory for UL installations).
Mounilng
For proper orientation of the unit in relation to its wall mounting plate and the loop
wiring, rend oil of this section befom installing tho unit. Befom mounting the
tmnsmiltzr permanently, conduct Go/No Go tests (see contml's instructions) to verify
adequate signal strength and reorient or relocate the transmitter if necessary. When o
satisfactory location is found, remove the battery and proceed with installation
The following mounting instructions assume that the unit will be mounted as shown in
the diagrams. The unit may, however, be installed in any direction, as long as the
relationship ofthe unit baits mounting plate is maintained.
The mounting plate, installed as described below, enables easy removal of the unit for
servicing, should it become necessary.
1.
2.
Remove the transmitter’n cover by inserting the flat blade of a small
screwdriver into the pry—off slot at the bottom end of the unit on the right side
closest to the cover's decorative ribs and twisting.
Dlsengage the supplied mounting plate from the unit by inserting the blade
of a small screwdriver into the mounting plate release hole (see Diagram 2) and
pushing the locking tab out (see Diagram 1). Slide the mounting plate downward
along the case back. Note: For this application, the alignment guide strip along one
edge of the mounting plate serves no function and may be broken away, if desired.
if concealed wiring is to be used, feed the wires through the concealed wiring
entry hole at one oorner of the plate (surface wiring is mentioned in Step 5 below),
Install the mounting plate, with its case-holding posts pointing up, in the
location selected, as described in the control unit's installation instructions. Use the
two flat-head screws supplied.
If surface wiring is to be used, remove the knockout slot in the case hack
(located across from loop 3 terminal block), Surfiwe wiring should enter through
this lmuclrcd out space provided. Do not connect the wiring to the terminal hlockls)
yet.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 1
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:e914769f-77b1-4e9a-8824-b27a230208e0
Producer                        : Acrobat Distiller 6.0 (Windows)
Create Date                     : 2005:10:06 16:48:46-04:00
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2005:10:06 16:49:32-04:00
Metadata Date                   : 2005:10:06 16:49:32-04:00
Document ID                     : uuid:de4f3db0-6f19-4aab-a9b7-c05a59c928d8
Format                          : application/pdf
Title                           : Full page fax print
Creator                         : E650365
Author                          : E650365

EXIF Metadata provided by EXIF.tools