Ademco 8DL5820L Door / Window Contact Transmitter User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1513700
Application ID	yqqiOkHrl1fvw1Fig0J8Xg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	22.58kB (282263 bits)
Date Submitted	2011-07-31 00:00:00
Date Available	2012-01-27 00:00:00
Creation Date	2011-07-05 15:14:50
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2011-07-05 15:44:24
Document Title	K9230V3_blueline_Ademco_5820L_instruct_exterior.eps
Document Creator	Adobe Illustrator CS5
Document Author:	Barto, Bill (S&FS)

FEDERAL COMMUNICATIONS
COMMISSION STATEMENTS:
The user shall not make any
changes or modifications to the
equipment unless authorized by the
Installation Instructions or User's
Manual. Unauthorized changes or
modifications could void the user's
authority to operate the equipment.
tio
ra
rfo
Pe
Slim Line Transmitter
"x
/4
(1
ADEMCO 5820L
ASSEMBLED IN MEXICO
© 2009 Honeywell International Inc.
All Rights Reserved
N219
LITHIUM
Long Life Battery Included
Sleek design is nearly half the size of competitors
Easy to open case requires no special tools
Case tamper protection (front and back)
Ideal for double-hung windows
Easy replaceable AAA lithium battery
Tamper Protection
Front and back-case tamper is
provided using the same switch.
The front-case tamper is always
enabled. Adding the third screw
as shown in the figure enables
the back-case tamper.
Ideal for casement and
double hung windows
ADEMCO 5820L
TAMPER
SWITCH
MOUNTING
HOLE
Slim Line Transmitter
Slim Line Transmitter
ADEMCO 5820L
TAMPER
PROTECTION
Slim Line Transmitter
BATTERY
(1.5VDC, AAA
LITHIUM.
SEE NOTE
INSIDE.)
Sleek design is nearly half the size of competitors
Easy to open case requires no special tools
Case tamper protection (front and back)
Ideal for double-hung windows
Easy replaceable AAA lithium battery
MOUNTING
HOLE
ADEMCO 5820L
<<< Open Carton Along Perforations >>>
")
1/
See inside of carton for
Installation Instructions
Slim Line Transmitter
ADEMCO 5820L
ÊK9230V3HŠ
7/11
K9230V3
Ademco
K9230V3
5820L Exterior of box
File: K9230V3_Blueline_Ademco_5820L_instruct_exterior.eps
BATTERY CAUTION: Risk of fire,
explosion and burns. Do not
recharge, disassemble, heat above
212 F (100 C) or incinerate.
Dispose of used batteries properly.
Keep away from children.
Battery Information
4x
1/8
Replace battery only with:
Energizer L92 AAA Lithium or
AAA Alkaline, Duracell MX2400,
Panasonic AM-4PI,
Eveready Engeriger EN92.
Observe correct polarity.
(1/
NOTE
5820L is a single-zone Slim-Line
Door/Window contact transmitter
that provides wireless notification
of intrusion.
NOTE
During the programming of the
control panel transmitter must be
enrolled as Input Type 3,
Supervised RF), Loop 1.
Installation
1. Temporarily mount the 5820L
and magnet using the doubleback tape provided.
NOTE
Before mounting permanently
using the double-back tape or
mounting screws, conduct a
Go/No Go test to verify adequate
signal strength and reorient or
relocate the transmitter if necessary
2. If the Go/No Go test was
successful, remove the
transmitters cover by inserting
the flat blade of a small screwdriver into the opening slot at
one end of the unit as shown
in the diagram and separate the
two halves.
3. The 5820L must only be
mounted against a flat surface.
A curved surface would cause
undo stress to the unit and
possible failure to operate
properly.
MAGNET ALIGNMENT
LOCATORS
5. If the case-back tamper
switch will be used,
install a third screw in
the middle hole.
MAGNET
6. Mount the magnet
(supplied) adjacent to
the two vertical
positioning lines on the
case side (see diagram).
The gap can be one-half
of an inch maximum.
7. To reinstall the cover,
position the cover so
that it covers the
mounted case-back, and
snap-shut. The two case
halves can only be fitted
together in one direction.
NOTE
Do NOT attempt to remove
the PCB from the plastic
cover for any reason.
GAP
0.5" MAX
FCC / IC Statement:
This device complies with Part 15
of the FCC Rules, and RSS 210 of
IC. Operation is subject to the
following two conditions: (1) This
device may not cause harmful
interference (2) This device must
accept any interference received,
including interference that may
cause undesired operation.
Cet appareil est conforme à la
partie 15 des règles de la FCC &
de RSS 210 des Industries
Canada. Son fonctionnement est
soumis aux conditions suivantes:
(1) Cet appareil ne doit pas causer
d' interferences nuisibles. (2) Cet
appareil doit accepter toute
interference reçue y compris les
interferences causant une
reception indésirable.
See inside of
carton for
installation
instructions.
Ademco
K9230V3
5820L Interior of box
File: K9230V3_Blueline_Ademco_5820L_instruct_interior.eps
OPENING
SLOT
rfo
rat
4. Install mounting screws
in the two outside
mounting holes as
shown in the diagram
using a #1 Phillips.
Pe
REFER TO THE INSTALLATION
INSTRUCTIONS FOR THE CONTROL
WITH WHICH THIS DEVICE IS USED,
FOR DETAILS REGARDING
LIMITATIONS OF THE ENTIRE
ALARM SYSTEM.
FOR WARRANTY INFORMATION GO TO:
http://www.security.honeywell.com/hsc/resources/wa
FOR DOCUMENTATION AND ONLINE SUPPORT
http://www.security.honeywell.com/hsc/resources/MyWebTech
See inside of
carton for
installation
instructions.
ion
Alkaline Battery Will Yield Less
Battery Life than Lithium
K9232V2 7/11 Rev. A
ADEMCO 5820L
Door/Window Contact Transmitter
INSTALLATION AND SETUP GUIDE
GENERAL INFORMATION
MOUNTING
The 5820L is a single-zone Slim-Line Door/Window
contact transmitter that provides wireless
notification of intrusion. The 5820L can be used
only with alarm systems that support 5800 Series
wireless devices. The 5820L has its own unique
serial number permanently assigned during
manufacture. You must enroll the transmitter’s
serial number in the control panel before it will
operate in the system. Refer to the control panel’s
installation instructions for programming details.
The description that follows assumes that the
transmitter will be mounted as shown in Figure 1,
with the magnet located adjacent to the unit's left
side. The transmitter may, however, be installed in
any direction, as long as the relationship of the unit
to the magnet is maintained as shown in Figure 1.
Note: During programming of the control panel,
5820L transmitters must be enrolled as Input Type
3 (Supervised RF), Loop 1.
The transmitter is powered by one AAA Lithium (or
alkaline) battery that is easily replaced when a low
battery condition is indicated by the control panel.
1.
Note: Before mounting the transmitter and magnet
permanently using the double-back tape or
mounting screws, conduct a Go/No Go test (see
control's instructions) to verify adequate signal
strength and reorient or relocate the transmitter if
necessary.
2.
If the Go/No Go test was successful, remove
the transmitter's cover by inserting the flat
blade of a small screwdriver into the opening
slot at one end of the unit as shown in Figure 1,
and separating the two halves.
3.
The 5820L must only be mounted against a flat
surface. A curved surface would cause undue
stress to the unit and possible failure to operate
properly.
Install mounting screws in the two outside
mounting holes as shown in Figure 2 using a #1
Phillips.
TAMPER PROTECTION
Front and back-case tamper is provided using the
same switch. The front-case tamper is always
enabled. Adding the third screw as shown in Figure
2 enables the back-case tamper.
MAGNET ALIGNMENT
LOCATORS
4.
GAP
0.5" MAX
OPENING
SLOT
5820-001-V0
MAGNET
Temporarily mount the 5820L and magnet
using the double-back tape supplied.
5.
If the case-back tamper switch will be used,
install a third screw in the middle hole.
6.
Mount the magnet (supplied) adjacent to the
two vertical positioning lines on the case side
(see Figure 1). The gap can be one-half an inch
maximum.
7.
To reinstall the cover, position the cover so
that it covers the mounted case-back, and snapshut. The two case halves can only be fitted
together in one direction.
Figure 1. 5820L (Typical Installation Arrangement)
Note: Do NOT attempt to remove the PCB from the
plastic cover for any reason.
MOUNTING
HOLE
MOUNTING
HOLE
TAMPER
SWITCH
5820-002-V1
TAMPER
PROTECTION
BATTERY
(1.5VDC, AAA
LITHIUM OR
ALKALINE)
Figure 2. 5820L Mounting/Battery Location
BATTERY
INSTALLATION/REPLACEMENT
Replace battery only with same or equivalent type.
Dispose of used batteries according to the battery
manufacturer’s instruction.
1. Remove the transmitter's cover (if it is not
off already) as described in Mounting; step 2.
2.
Observe correct polarity and insert the
battery provided into the battery retainer clips
as shown in Figure 2.
Note: Replace battery only with type specified in
the Specifications paragraph.
Battery: ...... 1.5VDC, AAA Lithium (Energizer L92) or
SPECIFICATIONS
Dimensions: ...................... 3.0” H x 0.5” W x 0.8” D
76.2mm x 12.7mm x 20.3mm
AAA Alkaline, (Duracell MX2400,
Panasonic AM-4PI, Eveready Energizer
EN92)
Gap: ......................................... 0.5 inch maximum
Magnet: ...........................WA5816MAG (supplied)
BATTERY CAUTION: Risk of fire, explosion
and burns. Do not recharge, disassemble, heat
above 212° F (100° C) or incinerate. Dispose of
used batteries properly. Keep away from
children.
FCC / IC STATEMENT
This device complies with Part 15 of the FCC Rules and RSS210 of Industry Canada. Operation is
subject to the following two conditions: (1) This device may not cause harmful interference, and (2),
this device must accept any interference received, including interference that may cause undesired
operation.
Cet appareil est conforme à la partie 15 des règles de la FCC & de RSS 210 des Industries
Canada. Son fonctionnement est soumis aux conditions suivantes: (1) Cet appareil ne doit pas
causer d' interferences nuisibles. (2) Cet appareil doit accepter toute interference reçue y compris
les interferences causant une reception indésirable.
FEDERAL COMMUNICATIONS COMMISSION STATEMENT:
The user shall not make any changes or modifications to the equipment unless authorized by the
Installation Instructions or User's Manual.
Unauthorized changes or modifications could void the user's authority to operate the equipment.
For the latest warranty information, please go to:
http://www.security.honeywell.com/hsc/resources/wa
2 Corporate Center Drive, Suite 100
P.O. Box 9040, Melville, NY 11747
Copyright 2008
Honeywell International Inc.
http://www.honeywell.com/security
ÊK9232V2KŠ
K9232V2 7/11 Rev. A

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Author                          : Barto, Bill (S&FS)
Create Date                     : 2011:07:05 15:14:50-04:00
Modify Date                     : 2011:07:05 15:44:24-04:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Document ID                     : xmp.did:F60AC31E16A7E011917B94ABDD3CE721
Instance ID                     : uuid:388601f2-f3ea-43bd-b749-e4f9e642a988
Original Document ID            : xmp.did:F40AC31E16A7E011917B94ABDD3CE721
Derived From Instance ID        : xmp.iid:F40AC31E16A7E011917B94ABDD3CE721
Derived From Document ID        : xmp.did:F40AC31E16A7E011917B94ABDD3CE721
Derived From Original Document ID: xmp.did:F40AC31E16A7E011917B94ABDD3CE721
History Action                  : saved, saved
History Instance ID             : xmp.iid:F40AC31E16A7E011917B94ABDD3CE721, xmp.iid:F60AC31E16A7E011917B94ABDD3CE721
History When                    : 2011:07:05 10:50:26-04:00, 2011:07:05 15:06:50-04:00
History Software Agent          : Adobe Illustrator CS5, Adobe Illustrator CS5
History Changed                 : /, /
Manifest Link Form              : EmbedByReference, EmbedByReference
Manifest Reference File Path    : \\NY80NT0013\SHARED\TechWriters\GRAPHICS\Gift Box Art_w_II\5820L_Slim Line Transmitter_Box_w_ii\magnet.jpg, \\NY80NT0013\SHARED\TechWriters\GRAPHICS\Gift Box Art_w_II\5820L_Slim Line Transmitter_Box_w_ii\5820L_pr.jpg
Format                          : application/pdf
Title                           : K9230V3_blueline_Ademco_5820L_instruct_exterior.eps
Creator                         : Barto, Bill (S&FS)
Creator Tool                    : Adobe Illustrator CS5
Metadata Date                   : 2011:07:05 15:44:24-04:00
Thumbnail Width                 : 196
Thumbnail Height                : 256
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 16377 bytes, use -b option to extract)
N Pages                         : 1
Has Visible Transparency        : False
Has Visible Overprint           : False
Max Page Size W                 : 8.500000
Max Page Size H                 : 11.000000
Max Page Size Unit              : Inches
Font Name                       : Arial-BoldMT, ArialMT, Code128B, Helvetica-Bold, Helvetica-Oblique, Helvetica, TimesNewRomanPSMT, Helvetica-Narrow, ArialNarrow-Bold
Font Family                     : Arial, Arial, Code128B, Helvetica, Helvetica, Helvetica, Times New Roman, Helvetica Narrow, Arial
Font Face                       : Bold, Regular, Normal, Bold, Oblique, Medium, Regular, Narrow, Narrow
Font Type                       : Open Type, Open Type, TrueType, Type 1, Type 1, Type 1, Open Type, Unknown, Open Type
Font Version                    : Version 3.00, Version 3.00, 1.0 Mon Jun 21 12:34:01 1993, 002.000, 002.000, 002.000, Version 3.00, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895, Version 2.37
Font Composite                  : False, False, False, False, False, False, False, False, False
Font File Name                  : ARIALBD.TTF, ARIAL.TTF, Code000.TTF, HVB_____.PFB; HVB_____.PFM, HVO_____.PFB; HVO_____.PFM, HV______.PFB; HV______.PFM, TIMES.TTF, MyriadPro-Regular.otf, ARIALNB.TTF
Plate Names                     : Cyan, Magenta, Yellow, Black, PANTONE 485 C
Swatch Group Name               : Default Swatch Group
Swatch Group Type               : 0
Swatch Colorant Swatch Name     : [Registration], [Registration], [Registration], [Registration], [Registration], [Registration], [Registration], [Registration], [Registration], [Registration], [Registration], [Registration], [Registration], [Registration], [Registration], [Registration], [Registration], [Registration], [Registration], [Registration], [Registration], [Registration], [Registration], [Registration], [Registration], [Registration], [Registration], [Registration], [Registration], [Registration], [Registration], C=0 M=0 Y=0 K=0, C=0 M=0 Y=0 K=100, C=0 M=10 Y=100 K=0, C=0 M=50 Y=0 K=0, C=0 M=50 Y=100 K=0, C=100 M=55 Y=100 K=0, C=100 M=90 Y=10 K=0, C=15 M=100 Y=100 K=0, C=45 M=90 Y=0 K=0, C=50 M=40 Y=30 K=0, C=50 M=85 Y=100 K=0, C=75 M=5 Y=100 K=0, C=75 M=90 Y=0 K=0, C=80 M=5 Y=0 K=0, PANTONE 485 C, Artios_Crease, Artios_Cut, Artios_Dimensions and text
Swatch Colorant Mode            : CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, RGB, CMYK, CMYK, CMYK
Swatch Colorant Type            : PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, SPOT, SPOT, SPOT, SPOT
Swatch Colorant Cyan            : 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 100.000000, 14.999998, 44.999999, 50.000000, 50.000000, 75.000000, 75.000000, 80.000001, 0.000000, 0.000000, 100.000000
Swatch Colorant Magenta         : 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 0.000000, 0.000000, 10.000002, 50.000000, 50.000000, 55.000001, 90.000004, 100.000000, 90.000004, 39.999998, 84.999996, 5.000001, 90.000004, 5.000001, 100.000000, 0.000000, 30.000001
Swatch Colorant Yellow          : 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 0.000000, 0.000000, 100.000000, 0.000000, 100.000000, 100.000000, 10.000002, 100.000000, 0.000000, 30.000001, 100.000000, 100.000000, 0.000000, 0.000000, 100.000000, 0.000000, 0.000000
Swatch Colorant Black           : 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 0.000000, 100.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 0.000000
Swatch Colorant Tint            : 100.000000, 100.000000, 100.000000, 100.000000
Swatch Colorant Red             : 237
Swatch Colorant Green           : 50
Swatch Colorant Blue            : 36
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Page Count                      : 4

EXIF Metadata provided by EXIF.tools