Ademco 8DLLKP500 Lyric Smart Peripheral - Wireless Keypad User Manual

Honeywell International Inc. Lyric Smart Peripheral - Wireless Keypad Users Manual

a href="https://usermanual.wiki/Ademco" itemprop="url"> Ademco >

Users Manual

Installation and Setup Guide Ref: LKP500-EN FEATURES & NOTES • Wireless alpha keypad serves as a secondary keypad for controlling the Lyric Smart Controller’s security functions. • Uses SiX™ technology protocol for secure, bidirectional communication. • Use up to eight (8) keypads with the Lyric Smart Controller. • Easy enrollment in the Controller. • Mounts to a wall or desk stand. • Supervised; supervision time is 60 minutes (cannot be changed). • Locate the keypad within 300 feet of the Lyric Smart Controller. • Powered by an external 110VAC input/9VDC output power pack (supplied). • Battery pack (7.2VDC) provides 24-hour backup power (supplied). LED Status indicators Indicator Color OFF BLINKING ON Security Shield Green System not ready AC Loss System ready to arm Red System disarmed AC Loss Entry Delay with AC Loss Exit Delay System armed Panic Red Not active N/A Active, waiting for selection of panic alarm type INSTALL THE BATTERY AND CONNECT THE POWER SUPPLY IMPORTANT: DO NOT connect the power supply to an AC outlet yet. See “Enroll the Keypad.” MOUNT THE KEYPAD ENROLL THE KEYPAD The keypad must be enrolled in the Lyric Smart Controller before it can be used. 1. At the Smart Controller, enter Programming mode and follow the control’s instructions to enter keypad enrollment mode (Program > RF Keypad > Add New > Serial Number). • RF keypads are assigned zone numbers, starting with zone 850. Selecting “Add New” automatically assigns the next available RF keypad zone number. 2. While the Controller is in enrollment mode, plug the keypad’s power pack into a 24hr, non-switchable outlet. • The keypad automatically attempts to pair with the Controller. • If enrollment is not successful, press any key on the keypad to restart the pairing process or disconnect and reconnect power. 3. After successful pairing, keypad displays Disarmed, Ready. • When enrolled, the keypad’s ID number appears on the Controller’s Programming screen. 4. After enrollment, program and save the keypad’s zone options (zone descriptor, etc.) at the Smart Controller. IMPORTANT: Once enrolled, the keypad cannot be used with another control panel until it is un-enrolled from the current controller. See the Smart Controller’s Programming Guide for details on removing devices. BATTERY REPLACEMENT IMPORTANT: Unplug the keypad power supply BEFORE starting. Reconnect power after the keypad is re-mounted. SPECIFICATIONS Physical: 6.7” W x 5.4” H x 0.9” D (170mm x 136mm x 22mm) Frequency: 2.4 GHz Battery Pack: Part number 300-06868: 7.2V, 6xAAA, 6x600mAH, NiMH Transformer: Part number 300-07332US: 110VAC input/9VDC, output 1A, 2-prong LCD Display: 2x16 Sounder: Speaker/Codec Notes on Keypad Supervision • When a trouble condition is detected, the keypad displays a trouble message and begins to beep. • Press any key to stop the beeping. • Keypad supervision time is set at 60 minutes (cannot be changed).
Download:
Mirror Download [FCC.gov]
Document ID2796040
Application IDs8F2qM5/dfItJGqNhnM7gg==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize88.59kB (1107333 bits)
Date Submitted2015-10-28 00:00:00
Date Available2016-04-25 00:00:00
Creation Date2015-04-25 10:42:33
Producing SoftwareAdobe PDF Library 11.0
Document Lastmod2015-04-25 10:42:35
Document TitleUsers Manual
Document CreatorAcrobat PDFMaker 11 for Word
FCC ID Filing: CFS8DLLKP500

Navigation menu