Ademco 8DLZWM Z-wave Module User Manual Full page fax print
Honeywell International Inc. Z-wave Module Full page fax print
Ademco >
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1627322 |
| Application ID | jUmyKBn81HApB4ZhR+z7rw== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 69.53kB (869068 bits) |
| Date Submitted | 2012-01-27 00:00:00 |
| Date Available | 2012-07-12 00:00:00 |
| Creation Date | 2012-01-18 16:27:50 |
| Producing Software | Acrobat Distiller 9.5.0 (Windows) |
| Document Lastmod | 2012-01-18 16:30:07 |
| Document Title | Full page fax print |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | e650365 |
ZWAVE Communlca lons Module Installa lon Guld Fur Documentation and Online sippo ttp lNN/wsecurityhoneywell.com/hsc/resourceslMyWebTech General Information The Lame—ZWAVE communications module is intended to provide connection belween Dompallole Honeywell LYNX Toucn control panels and the ZWAVE devices and allows the panel to conduct integrated ZWAVE control Com allble Controls Control Firmvimre Level Ins1al|ation Guide Lynx Touch ,, 7 5.00 Boo-loam QuicKConnect Touch 5.00 BOO»10144V1 mm“ Installing the Module 1 Install the provided FCC/lC label (PIN BOO-10342) on the controls case back (reler to Figure l) Figure 1. Installing Ihe L5100-ZWAVE Communications Module Programming Notes Programming associated with the L5100-ZWAVE module is accomplished as part olthe Control Panel Programming. Rerer tothe Conlrol Panel installation and Selup Guide for additional inlormalion. ‘l The Multi Mode Serial option must be set to “Enhanced Reports“. Figure 1. FCCIIC Label Location 2. Release the LYNX Touch front case from the back case by depressing the two locking tabs at the top olthe unit with the blade ola medium size screwdriver Refer to Figure 2, 3 install the module component side up in the control panel as shown in Figure 2 Ensure that module‘s receptacle is securely seated on the controls edge connector Specifications erd Dimensions“ 1 25' WX 2 B75" L x 0 3125" D Current Drain: TBD mA nominali TBDmA max Inpul Vollage. 3.3 VDC Temperalure. 32°F (0°C) lo ‘l 40°F (Giro) REFER TO THE lNSTALLATlON AND SETUP GUIDE FOR THE CONTROL WITH WHICH THIS DEVICE IS USED FOR WARRANTY INFORMATION AND LIMITATIONS OF THE ENTIRE SYSTEM. FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENTS The user shall not make any changes or modifications to the equipment unless authorized by the installation instructions or User‘s Manual Unauthorized changes or modifications could Void the user's authontyto operate the equipment. FCC CLASS B STATEMENT This equipment has been tested to FCC requirements and has been fumd acceptable for use The FCC requires the lollc'wing statement Tor your information: This equipment generates and uses radio frequency energy and if not installed and used properly, that is, in strict accordance with the manufacturers instructions, may cause interference lo radio and lelevlslon reception. it has been type tested and found lo comply With the limits for a Class B computing device in accordance with the specifications in Part 15 of FCC Rules, which are designed to provide reasonable prdection against such interference in a residential installation. Hon/ever. there is no guarantee that interference will nd occur in a particular installation lfthis equipment does cause interference lo radio or television reception, which can he determined byturnlng the equipment off and on, the user is encouraged to tryto correct the interference py one or more of the following measures - lfusing an indoor antenna, have a quality outdoor antenna installed. Reorient the receiving antenna until interference is reduced or eliminated. - Move the radio or television receiver away fi'om the receiver/control - Move the antenna leads away from any Wire runs to the recelver/control. Plug the receiver/control into a different outlet so that it and the radio ortelevision receiver are on different branch circuits. - Consult the dealer or an experienced radio/TVtechnician for help INDUSTRY CANADA CLASS B STATEMENT icssooa Class B Notice - Avis NMB—OOG, Classe B This Class B dignal apparatus complies with Canadian lessons. Cel appareil numerique de la classe a est conforme a la norme NMB—UU3 du Canada. FCC I I0 STATEMENT This device complies with Part 15 dithe FCC Rules, and RSS 210 of IC. Operation is subiect to the following two conditions: (1) This device may not cause harmful interference (2) This device must accept any interference received. including interference that may cause undesired operation Cet appareil est confume a la partie 15 des regles de la FCC & de RSS 210 des Industries Canada. Sort lonctionnement est salmis aux conditions suivantes: (1) Cet appareil ne doit pas causer d‘ interferences nuisibles (2) Cet appareii doit acceptertoute interference recue y compris les interferences causant une reception indésirable RF Exposure & WARNING: The L51001WAVE must be installed to provide a separation distance or at least 20 cm lrnm all persons. Honeywell 2 Corporate Center Drive, Suite 100 P.O. Box 9040, Melville, NY 11747 Copyright © 2011 Honeywell International lnc. www.hone ell.c0rnlsecurit |II| IIII|II|II|III© 2610/11 Rev. A
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Author : e650365 Create Date : 2012:01:18 16:27:50-05:00 Modify Date : 2012:01:18 16:30:07-05:00 XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Creator Tool : PScript5.dll Version 5.2.2 Metadata Date : 2012:01:18 16:30:07-05:00 Format : application/pdf Title : Full page fax print Creator : e650365 Producer : Acrobat Distiller 9.5.0 (Windows) Document ID : uuid:bf71a3ce-c31f-463b-8c56-e8b2670fed15 Instance ID : uuid:fda9b6b6-5be6-4081-949a-dcd713627e1f Page Count : 2EXIF Metadata provided by EXIF.tools