M7U_User Manual_Rev1
![](/img.php?id=1868544&img=bg1.png)
1
QUICK START GUIDE
Power Controller
M08-0237-002 10/12
INTRODUCTION
Congratulations on your purchase of the SmartBridge Power
Controller. Your Power Controller allows you to use your PC to
power on and off any device that operates at up to 8 amps.
This Quick Start Guide describes how to set up and
troubleshoot your Power Controller. For a full system set-up
manual, please visit our website: www.smartbridge.net
USING YOUR POWER CONTROLLER
Using your computer and Wireless System Gateway, you locally
manage the Power Controller to turn devices on and off.
How It Works
Package Contents
Installing Your Power Controller
Consult the SmartBridge System Setup manual for details.
1. Plug the device into the Power Controller.
2. Plug the Power Controller into a wall outlet. The Power Controller handles
devices up to 8
8
amps, so it should not be used with heavy-duty electrical
devices.
sseleriW
Power
Controller
P
Feature Locator
Features and Specifications
LED indicates power is available
Typical range open Air
(line of sight): 200 feet (60 m)
Typical range indoors: 50 feet (15 m)
Dimensions:
2.0
0
27” x 1.417” x 4.257”
Communication frequency:
99 9
1
MHz
P O W E R
Side view
Front
view
The Power Controller enables you to turn
on and off devices remotely from your PC.
For example, you can have SmartBridge
turn a lamp on and off.
TROUBLESHOOTING
Problem
Wireless System Gateway does not recognize the Power Controller
Solution
• Position the Power Controller in closer proximity to your Gateway and
try again.
• Ensure that there are no other wireless devices interfering with the Power
Controller. The Power Controller transmits on the 915 MHz frequency.
Problem
Device does not turn on/off when specified
Solution
• Ensure that the Power Controller has been registered properly with the
Wireless System Gateway by logging into your SmartBridge program and
reviewing the Devices list.
• Place the Power Controller in another location closer to the Wireless
Gateway.
FAQ
How far away can the Power Controller be placed from my Wireless
Gateway?
Typically 50 feet (15 meters).
Can I place the Power Controller in a different room than my Wireless
Gateway?
Yes, the Power Controller and Wireless Gateway use radio frequencies
to communicate with each other. These frequencies can go through
objects like walls, ceilings, and floors.
Can I use the Power Controller outdoors?
No, the Power Controller is restricted to indoor use only.
What can I plug into the power module?
You can plug in any 110V device that draws no more than 8 amps.
Devices that require higher loads may cause the Power Controller to fail.
Do not plug power strips into the Power Controller as multiple devices
could exceed 8 amps.
Power LED
Power button
AC receptacle
![](/img.php?id=1868544&img=bg2.png)
REGULATORY INFORMATION
FCC Notices:
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user’s authority to
operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Model: OLPOWER
ICES-003 Statement
This Class B digital apparatus complies with Canadian ICES-003.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables
aux appareils radio exempts de licence. L’exploitation est autorisée aux deux
conditions suivantes: (1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en compromettre le fonctionnement.
Model: OLPOWERA
2
LIMITED WARRANTY
SmartBridge Power Controller
BRK Brands, Inc., ("BRK") the maker of First Alert®brand products warrants
that for a period of one year from the date of purchase, this product will be
free from defects in material and workmanship. BRK, at its option, will repair
or replace this product or any component of the product found to be
defective during the warranty period. Replacement will be made with a
new or remanufactured product or component.
If the product is no longer
available, replacement may be made with a similar product of equal or greater
value. This is your exclusive warranty.
This warranty is valid for the original retail purchaser from the date of initial
retail purchase and is not transferable. Keep the original sales receipt.
Proof of purchase is required to obtain warranty performance. BRK dealers,
service centers, or retail stores selling BRK products do not have the
right to alter, modify or any way change the terms and conditions of this
warranty.
This warranty does not cover normal wear of parts or damage resulting
from any of the following: negligent use or misuse of the product, use on
improper voltage or current, use contrary to the operating instructions,
disassembly, repair or alteration by anyone other than BRK or an authorized
service center. Further, the warranty does not cover Acts of God, such as
fire, flood, hurricanes and tornadoes.
BRK shall not be liable for any incidental or consequential damages caused
by the breach of any express or implied warranty. Except to the extent
prohibited by applicable law, any implied warranty of merchantability or
fitness for a particular purpose is limited in duration to the duration of the
above warranty. Some states, provinces or jurisdictions do not allow the
exclusion or limitation of incidental or consequential damages or limitations
on how long an implied warranty lasts, so the above limitations or exclusion
may not apply to you. This warranty gives you specific legal rights, and you
may also have other rights that vary from state to state or province to
province.
How to Obtain Warranty Service
For customer service, technical support, and warranty claims, contact our
Customer Support Center at 1-800-323-9005 Monday - Friday 7:30 am to
5:00 pm Central Standard Time.
Registration
Register your product at:
www.smartbridge.net
© 2012 BRK Brands, Inc. All rights reserved.
Distributed by BRK Brands, Inc.
3901 Liberty Street Road, Aurora, IL 60504-8122
SmartBridgeTM is a registered trademark of BRK Brands, Inc.
First Alert®is a registered trademark of the First Alert Trust used under license.