Advance Bright BE200 Air Twins User Manual BE200 IM OP
Advance Bright Limited Air Twins BE200 IM OP
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3378386 |
| Application ID | sl4gQcVSQn8uTcXhG8vyfQ== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 46.93kB (586589 bits) |
| Date Submitted | 2017-05-03 00:00:00 |
| Date Available | 2017-05-03 00:00:00 |
| Creation Date | 2017-04-06 12:21:31 |
| Producing Software | Adobe PDF library 9.90 |
| Document Lastmod | 2017-05-02 15:42:24 |
| Document Title | BE200 IM OP |
| Document Creator | Adobe Illustrator CS5 |
Open size: 360mm(W) X 120mm(H) Fold size: 90mm (W) x 40mm (H) Personalize your fit Connect Air Twins with your digital devices How To Pair With A New Device Air Twins comes with three different sizes of interchangeable ear tips. A pair of ear tips is pre-mounted to the earphones. Make sure the caps seal your ear completely which leads to a proper sound quality. We recommend to try all caps and select the most secure one. Air Twins uses Bluetooth to connect with your digital devices. After turn on both earbuds: 1. Select “BE200” and connect via Bluetooth on your digital device 2. The Earbuds will notify you a message of “Pairing successful, second device connected” 3. Air Twins is now ready to use 1. Disconnect your current Bluetooth connection on your digital device 2. Turn on Bluetooth on your new device and follow the above connection steps Inserting the Earphones CM MY The fit of earphones can greatly affect sound quality, make sure you pick the correct tips and install on the earbuds correctly and follow the step below: 1. Tilt the earbuds slightly forward and insert the ear tip into your ear 2. Adjust the fit by rotating Air Twins backwards until you feel comfortable and secure fit Air Twins BE200 True Wireless Stereo Bluetooth Earbuds with Power Case Overview Turn On Air Twins and Setup Inter-earbuds connection ***The “L” & “R” Air Twins earbuds were paired with each other by default, user can simply take out both earbuds from the magsnap case and trigger the inter-earbuds connection automatically. CY LED Indicator USB Output Power Button Power Case Front View Twist Cover Power Case Cover Magnetic Charging Dock Earbud Control Button Earbuds Interchangeable Ear Tips Example: Android 6.0 Smartphone Press Settings > Bluetooth ON > Scan > BE200 > Pair 1. Use the supplied USB cable to connect your Power Case to a USB power source (a computer, power bank or USB charging plug) 2. While the Power Case is being charged, the LED power indicator on the Power Case will turn red When fully charged the LED power indicator will turn off. USB Compatible Wall charger (not included) If user took out both earbuds but either one of earbuds LED did not flash, it means the inter-earbuds connection did not triggered properly. In this case, simply put both earbuds back to the charging dock and wait for 5 seconds, after that, user can take out both earbuds again and the inter-earbuds connection will be automatically activated.*** or Computer (not included) Turning off Air Twins Once finished using Air Twins, you may turn it off by: 1. Press the Earbud Control Button for 3 seconds and the Earbud will notify you a message “Power Off”, or 2. Simply put the Earbuds back to the magnetic charging dock, the Air Twins will automatically turn off. Reset Auto-pairing Between Left and Right Earbuds Earbud LED Indicator How to charge Air Twins Power Case Once user take out the earbuds from case, the LED on “L” earbud will flash in Red/Blue while the LED on “R” earbud will flash in Blue, user can put on both earbuds and a voice notification “Connected” will be provided from “L” earbud, afterwards you can pair Air Twins with your digital device. Micro-USB Charging Port Once you are connected via Bluetooth, simply select the music on your device and Air Twins will play instantly Calling someone: when using your mobile, you will have the option of using your Air Twins as the headset, please make sure it is selected within your mobiles settings. Receiving calls: either press the Earbuds Control Button to answer the call on the Air Twins, or you can answer the call in the usual way on your phone – you need to make sure your Air Twins is selected within your mobiles settings. Call Last Dial: Simply double click the Earbud, your mobile phone will automatically initiate a call to your last dial Ending calls: Single click the Earbud Control button while on phone to end the call or use your phone in the usual way. Before you can get started using Air Twins, it needs to be activated. 1. Place Air Twins into the Power Case and make sure it sits comfortably on the magnetic charging dock 2. Connect the Power Case to a computer or a power source via Micro-USB Cable 3. The LED indicator on the power case will start flashing and Air Twins will start charging at the other end. We recommend you fully charge the Air Twins power case before your first use 4. The battery is fully charged when the LED indicator on the power case turns to level 4 Air Twins Micro-USB Charging Cable Interchangeable Ear Tips User Manual Playing Music Making or Receiving Calls Activate and Charge User Manual FCC ID:2AANE-BE200 Included In this package CMY Example: iPad / iPhone Press Settings > General > Bluetooth > Bluetooth ON > BE200 > Pair Power Case Back View 1. Make sure both earbuds are power off 2. Press and hold both earbuds control button for 7 seconds 3. The LED indicator on Air Twins will flash in red & blue first and turn into flashing blue after 5 seconds. 4. During flashing blue LED stage, the earbuds will establish the connection with each other, 5. A voice notification “Left channel” & “Right channel” will be provided on-ear and you can pair Air Twins with your digital devices after the inter-earbuds connection stage Quick Earbud Remote Control Function Play / pause a track Call last dial Accept call End call Action Single click Double click Single click (receiving phone call) Single click (On Phone) Open size: 360mm(W) X 120mm(H) Fold size: 90mm (W) x 40mm (H) How to Charge your Earbuds Put your earbuds back to the magnetic holder, the earbuds LED will turn to red and indicate that it is charging. How to Charge a Mobile Device CM 1. Connect your device to the USB output port on the Power Case with the Micro USB cable provided or use the original cable come with your device. 2. Press the Power Button on the Power Case 3. When your device is fully charged or you want to stop, disconnect the cable. ***In order to charge your device, you will need to have a USB cable compatible with your device. These come standard with all Apple products as well as most other smartphones, tablets and digital devices. Plug the standard USB end into the Power Case. Now, use the other end of cable and plug it into the device you wish to charge. Once charged, simply unplug your device. Note: The maximum total output current of this battery is 1.5A. Power cannot be discharged to the mobile device requiring amperage of more than 1.5A. Note: Different mobile device manufacturers have different requirement for the cable which are used for charging of mobile device. Different mobile devices have different charging verification modes and new product appear from time to time. Accordingly, we do not guarantee that our product can charge all devices. Some devices require special charging cables or connectors, or we can charge these products only by using our cables or connectors. For Apple device user, please use your own original cable for charging your device. MY Interpretation of the Power Case Status Indicator CY CMY Charging ≤ 25% ≤ 50% ≤ 75% ≥ 75% = fully charged. You can disconnect the USB connector from USB wall charger or PC. *Charging Time: approx. 3 hours (by DC5V 1A input) Discharging ≤ 25%, you should recharge your Power Case. ≤ 50% ≤ 75% > 75% Note: It is normal for the Air Twins and device to get warm during charging and discharging, and they may get even warmer if you use your device to, for example, play video or game while charging. Specifications Bluetooth version: Bluetooth 4.1 Operating distance: up to 33 feet (10 metres) Impedance: 16Ω Earphone Sensitivity: 94 dB/mW Frequency: 20Hz – 20KHz Playtime: Up to 3 hours music Talk time: Up to 3.5 hours Maximum playtime with power case: Additional 60 hours music/talk time Input Voltage: 5V/1A Output Voltage: 5V/1.5A Battery Capacity: 2,800mAh Charging time: 1 hour (Earphone) 3 hours (Case) Dimensions: 15 x 15 x 25 mm (Earphone ) 89 x 89 x 60 mm (Case) Weight: 4 grams (Earphone) 101 grams (Case) Model No: BE200 www.airtwins.com Designed by Ye!! in Hong Kong Made in China Troubleshooting No connection between Air Twins and your Bluetooth device. • Make sure the Air Twins is fully charged • Make sure the Air Twins is switched on. • Make sure your Bluetooth device is available and supports Bluetooth Advance Audio Distribution profile. • Make sure the Air Twins is within range of your Bluetooth device. Audio is not coming out from the Bluetooth Earbuds after Bluetooth device successfully paired. • Make sure the Bluetooth device volume is set to a comfortable listening level. • Try to reconnect your device with Air Twins • • • • • • Do not touch Air Twins with wet hands Disconnect the USB connector from Air Twins’s Power Case once fully charged Only use this product within the following temperatures: 0° - 40° Do not connect input and output in reverse Do not charge Air Twins in excess of the rating suggested If any issue arises when using Air Twins, disconnect the USB connector from the computer port and contact your dealer • In the unlikely event that any liquid from the inside of this product gets into your eyes, do not rub your eyes. Wash your eyes immediately with clean water and consult a physician • All Ye!!’s products have been tested comprehensively to ensure quality. If you encounter any unusual heat, discoloration or product distortion during charging or storage, please stop using it immediately and contact the dealer. These issues may cause leakage, heat, smoke or ignition of Air Twins • Air Twins is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities (or lack of experience and knowledge) unless they have been given supervision or instructions concerning the use of Air Twins by a person responsible for their safety. Children should be supervised to ensure that they do not play with Air Twins, this is not a toy. Legal Liability Air Twins can only be used with compatible products and the Power Case can be used only with matching electronic equipment. Please read your equipment compatibility instructions to determine whether Air Twins matches your equipment requirements. The manufacturer will not be liable for any damage to your electronic equipment during the use of this product. Ye!! will not held responsible for any equipment or accessories not suitable for use with Air Twins. The manufacturer will not be held liable for damage caused by misuse or damage incurred by the buyer or the third party rising from any intentional or unintentional use of Air Twins. As mentioned above, the manufacturers shall not be held liable for damage caused by misuse of the Air Twins. FCC ID:2AANE-BE200 Safety information Read all information and warnings before using Air Twins. Improper use of this product may lead to the product being damaged and you (the buyer, not the dealer) will be held responsible for damages such as overheating, the release of toxic fumes, fire or explosion. • Do not attempt to charge Air Twins by using any other method other than a USB charger, power bank or computer • Do not modify or disassemble the battery • Do not dismantle or modify Air Twins in any way • Do not use the battery in bathrooms etc. Do not expose Air Twins to moisture or immerse it in liquid. • Keep Air Twins dry at any time. • Do not keep Air Twins in an environment that has excessively high temperatures, including intense sunshine • Do not throw this product into a fire or leave in a hot environment. Avoid dropping or any other impact or friction to this product • Do not place Air Twins on flammable materials, such as bedding or carpets during charging This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or change to this equipment. Such modifications or change could void the user’s authority to operate the equipment. This radio transmitter (identify the device by certification number or model number if Category II) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement.The device can be used in portable exposure condition without restriction.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Create Date : 2017:04:06 12:21:31+08:00 Creator : Adobe Illustrator CS5 Modify Date : 2017:05:02 15:42:24+08:00 XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Format : application/pdf Title : BE200 IM OP Metadata Date : 2017:05:02 15:42:24+08:00 Creator Tool : Adobe Illustrator CS5 Thumbnail Width : 256 Thumbnail Height : 152 Thumbnail Format : JPEG Thumbnail Image : (Binary data 13480 bytes, use -b option to extract) Instance ID : uuid:fbb18373-3944-4bb8-a5dd-b5e912782b32 Document ID : xmp.did:02801174072068118083C97EB1C64273 Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : uuid:241cc527-4dd9-7a46-9048-5651560be19d Derived From Document ID : xmp.did:F77F1174072068118A6DC31C6231E083 Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : default History Action : saved, saved History Instance ID : xmp.iid:F77F1174072068118A6DC31C6231E083, xmp.iid:02801174072068118083C97EB1C64273 History When : 2017:03:07 17:27:13+08:00, 2017:04:06 12:21:26+08:00 History Software Agent : Adobe Illustrator CS5, Adobe Illustrator CS5 History Changed : /, / Manifest Link Form : EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference Manifest Reference File Path : /Volumes/Public/Art Group/Ye!!/Ye!! Models/BE200/BE200 IM/image/WhatsApp Image 2017-03-09 at 16.24.45.jpg, /Volumes/Public/Art Group/Ye!!/Ye!! Models/BE200/BE200 IM/image/WhatsApp Image 2017-03-09 at 16.24.42.jpeg, /Volumes/Public/Art Group/Ye!!/Ye!! Models/BE200/BE200 IM/image/WhatsApp Image 2017-03-09 at 16.24.34.jpg, /Volumes/Public/Art Group/Ye!!/Ye!! Models/BE200/BE200 IM/image/WhatsApp Image 2017-03-09 at 16.24.33.jpeg, /Volumes/Public/Art Group/Ye!!/Ye!! Models/BE200/BE200 IM/image/16667958_10155066912997009_2093850356_o.jpg, /Volumes/Public/Art Group/Ye!!/Ye!! Models/BE200/BE200 IM/image/16667291_10155066912932009_488067518_o.jpg, /Volumes/Public/Art Group/Ye!!/Ye!! Models/BE200/BE200 IM/image/16593845_10155066912867009_1644686738_o.jpg, /Volumes/Public/ABL Yell info/MARKETING/Product Information/Headphones & Earphones/BE200/user manual/image/12312.png, /Volumes/Public/Art Group/Ye!!/Ye!! Models/BE200/BE200 IM/BE200.psd, /Volumes/Public/Art Group/Ye!!/Ye!! Models/BE200/BE200 IM/image/16667986_10155066912972009_1505191389_o.jpg Startup Profile : Print Has Visible Overprint : True Has Visible Transparency : True N Pages : 1 Max Page Size W : 359.647126 Max Page Size H : 119.999910 Max Page Size Unit : Millimeters Font Name : MyriadPro-Light, MyriadPro-Regular, MyriadPro-Bold Font Family : Myriad Pro, Myriad Pro, Myriad Pro Font Face : Light, Regular, Bold Font Type : Open Type, Open Type, Open Type Font Version : Version 2.006;PS 002.000;Core 1.0.38;makeotf.lib1.6.6565, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895 Font Composite : False, False, False Font File Name : MyriadPro-Light.otf, .SM.gul.MyriadPro-Regular.otf, .SM.gul.MyriadPro-Bold.otf Plate Names : Cyan, Magenta, Yellow, Black, PANTONE Process Cyan C Swatch Groups Colorants Tint : 100.000000 Swatch Groups Group Name : Brights Swatch Groups Group Type : 1 Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0 Swatch Groups Colorants Mode : CMYK Swatch Groups Colorants Type : PROCESS Swatch Groups Colorants Cyan : 60.000004 Swatch Groups Colorants Magenta : 90.000000 Swatch Groups Colorants Yellow : 0.003099 Swatch Groups Colorants Black : 0.003099 Producer : Adobe PDF library 9.90 Page Count : 2EXIF Metadata provided by EXIF.tools