Advance Bright BTX1 Portable Bluetooth Speaker User Manual BTX1 IM OP
Advance Bright Limited Portable Bluetooth Speaker BTX1 IM OP
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3347398 |
| Application ID | 4AHEZ5D6qAKqqHAVamDXzA== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 82.17kB (1027110 bits) |
| Date Submitted | 2017-04-06 00:00:00 |
| Date Available | 2017-04-06 00:00:00 |
| Creation Date | 2016-11-10 15:09:48 |
| Producing Software | Adobe PDF library 9.90 |
| Document Lastmod | 2017-04-06 09:20:15 |
| Document Title | BTX1 IM OP |
| Document Creator | Adobe Illustrator CS5 |
Open size: 380mm(W) X 100mm(H) Fold size: 190mm (W) x 100mm (H) Make sure the Bluetooth device volume is set to a comfortable listening level. Audio is not coming out from the Bluetooth Speaker after the non-Bluetooth device connected with the micro USB to USB and 3.5 mm splitter cable. CM MY CY CMY • Make sure the 3.5 mm aux cable is correctly and firmly connected to the Bluetooth Speaker and non-Bluetooth device. • Make sure the non-Bluetooth device is set to a comfortable listening level. Precautions 1. The radio waves emitted by the Bluetooth Speaker and Bluetooth device can affect operation of nearby electronics including medical devices. 2. Keep the unit in a cool, dry place. For more information, please visit www.yelltowin.com Designed by Ye!! in Hong Kong Assembled in China Sound X | BTX1 Portable Bluetooth Speaker User Manual 2. When the BTX1 is fully charged, disconnect the cable. Included In This Package • • • • BTX1 Portable Bluetooth Speaker Micro USB charging cable 3.5mm Aux cable User Manual Note: Approximately 3 – 4 hours required for full charge. Battery will last up to 3-4 hours when connected wirelessly and up to 5-6 hours when connected through Line-in. Overview Power Button Bluetooth LED indicator USB Compatible Wall charger (not included) CM Front View MY Charging indicator CY LED Indicators CMY BT Back View Computer (not included) Line-in Micro USB Power Input Indicator Status BLUE RED Flashing BLUE Power On Charging Pairing Mode Bluetooth Connected BLUE How to charge BTX1 1. Plug the BTX1 into your computer or USB compatible wall charger via the included Micro USB Cable. Example: iPad / iPhone Press Settings > General > Bluetooth > Bluetooth ON > Ye!! – BTX1 > Pair Example: Android 4.3 Jelly Bean Smartphone Press Settings > Bluetooth ON > Scan > Ye!! – BTX1 > Settings > Check the Media audio box Reconnecting Bluetooth Device Keep in mind that the Bluetooth Speaker has a 33 feet range in open field. If you move out of range or turn off the Bluetooth feature on your Bluetooth device, the Bluetooth Speaker will disconnect from your device. To reconnect, simply follow the instruction in the “Getting Connected” section. Changing Connected Bluetooth Device or 3. When the “Ye!! – BTX1” appears on the device list of your device, select “Ye!! – BTX1”. The status indicator turns solid blue after pairing is established. The speaker is ready to play music. Getting Connected via Bluetooth Bluetooth Pairing 1. Press the power button to turn on the device. The speaker is discoverable and ready for pairing. The status indicator blinks blue. 2. On your Bluetooth music device, turn on Bluetooth and scan for devices in its Bluetooth menu. 1. Disable the Bluetooth function of your Bluetooth device. 2. The Bluetooth Speaker can now be connected to the different Bluetooth device. 3. Following the instructions in the “Getting Connected” section Play Audio from Non-Bluetooth Device 1. Turn on BTX1, both LED indicator turn on flashing blue 2. Connect the Bluetooth Speaker and your non-Bluetooth audio device via the included 3.5 mm aux cable. The Bluetooth indicator will turn off and the power indicator will turn on. The speaker is ready to play music. 3.5mm aux cable Specifications Model No.: Output Power: Input Voltage: Charge Time: Input: Playback Time: BTX1 10W x 2 DC 5V / 2A 3 - 4 hours Wireless Bluetooth/Line in Up to 6 hours on Bluetooth Up to 5-6 hours on Line-in Bluetooth Version: Bluetooth 4.1 with EDR Operating Distance: Up to 33 feet (10 metres) Dimensions: 201 x 110 x 123 mm Weight: 792 grams Troubleshooting No connection between Bluetooth Speaker and your Bluetooth device. • Make sure the Bluetooth Speaker is fully charged • Make sure the BTX1 is switched on. • Make sure your Bluetooth device is available and supports Bluetooth Advance Audio Distribution profile. • Make sure the Bluetooth Speaker is within range of your Bluetooth device. Audio is not coming out from the Bluetooth Speaker after Bluetooth device successfully paired. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or change to this equipment. Such modifications or change could void the user’s authority to operate the equipment. This radio transmitter (identify the device by certification number or model number if Category II) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. To maintain compliance with FCC’s RF exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Create Date : 2016:11:10 15:09:48+08:00 Creator : Adobe Illustrator CS5 Modify Date : 2017:04:06 09:20:15+08:00 XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Format : application/pdf Title : BTX1 IM OP Metadata Date : 2017:04:06 09:20:15+08:00 Creator Tool : Adobe Illustrator CS5 Thumbnail Width : 256 Thumbnail Height : 164 Thumbnail Format : JPEG Thumbnail Image : (Binary data 13831 bytes, use -b option to extract) Instance ID : uuid:df5efa11-cee4-4541-b2f5-3edee3a2c76c Document ID : xmp.did:01801174072068118A6DB6FD084BFC1A Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : uuid:52070863-52da-d94a-9fa6-5801f4561770 Derived From Document ID : xmp.did:018011740720681180838ADB7C6AA227 Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : default History Action : saved, saved History Instance ID : xmp.iid:018011740720681180838ADB7C6AA227, xmp.iid:01801174072068118A6DB6FD084BFC1A History When : 2016:10:26 17:44:31+08:00, 2016:11:10 15:09:42+08:00 History Software Agent : Adobe Illustrator CS5, Adobe Illustrator CS5 History Changed : /, / Manifest Link Form : EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference Manifest Reference File Path : /Volumes/Public/Art Group/Ye!!/Ye!! Models/BTX1/BTX1 IM/2F.psd, /Volumes/Public/Art Group/Ye!!/Ye!! Models/BTX1/BTX1 IM/2E.psd, /Volumes/Public/Art Group/Ye!!/Ye!! Models/BTX1/BTX1 IM/2C.psd, /Volumes/Public/Art Group/Ye!!/Ye!! Models/BTX1/BTX1 IM/2B.jpg, /Volumes/Public/Art Group/Ye!!/Ye!! Models/BTX1/BTX1 IM/2A.jpg, /Volumes/Public/Art Group/Ye!!/Ye!! Models/BTX1/BTX1 IM/1E.psd, /Volumes/Public/Art Group/Ye!!/Ye!! Models/BTX1/BTX1 IM/1D.psd, /Volumes/Public/Art Group/Ye!!/Ye!! Models/BTX1/BTX1 IM/1C.jpg, /Volumes/Public/Art Group/Ye!!/Ye!! Models/BTX1/BTX1 IM/1B.jpg, /Volumes/Public/Art Group/Ye!!/Ye!! Models/BTX1/BTX1 IM/1A.jpg Startup Profile : Print Has Visible Overprint : True Has Visible Transparency : False N Pages : 1 Max Page Size W : 379.999889 Max Page Size H : 99.998375 Max Page Size Unit : Millimeters Font Name : HelveticaNeue, MyriadPro-Regular, MyriadPro-Semibold, MyriadPro-Bold Font Family : Helvetica Neue, Myriad Pro, Myriad Pro, Myriad Pro Font Face : Regular, Regular, Semibold, Bold Font Type : TrueType, Open Type, Open Type, Open Type Font Version : 6.1d8e1, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895 Font Composite : False, False, False, False Font File Name : HelveticaNeue.dfont, .SM.gul.MyriadPro-Regular.otf, .SM.gul.MyriadPro-Semibold.otf, .SM.gul.MyriadPro-Bold.otf Plate Names : Cyan, Magenta, Yellow, Black, PANTONE Process Cyan C Swatch Groups Colorants Tint : 100.000000 Swatch Groups Group Name : Brights Swatch Groups Group Type : 1 Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0 Swatch Groups Colorants Mode : CMYK Swatch Groups Colorants Type : PROCESS Swatch Groups Colorants Cyan : 60.000004 Swatch Groups Colorants Magenta : 90.000000 Swatch Groups Colorants Yellow : 0.003099 Swatch Groups Colorants Black : 0.003099 Producer : Adobe PDF library 9.90 Page Count : 3EXIF Metadata provided by EXIF.tools