Advance Multimedia Internet Technology CDM530NC WiFi Mobile Broadband Router User Manual CDM530NC UM

Advance Multimedia Internet Technology Inc. WiFi Mobile Broadband Router CDM530NC UM

User manual

1Advance Multimedia Internet Technology Inc. No.28, Lane 31, Sec. 1, Huandong Rd., Sinshih Township, Tainan County 74146, Taiwan CDM530NC WiFi Mobile Broadband Router Installation Steps Step 1. Install the battery: Turn OFF the power switch, open the battery lid, and then insert the Li-ion battery into the battery holder. DO NOT insert or remove the Li-ion battery while the power switch is at ON position. Step 2. Close the battery lid Step 3. Plug in power: Connect with the power adapter to the receptor on the back panel of it.
2 Step 4. Start to Charge the Battery: Then plug the other end of the power adapter into a wall outlet. If it is the first time to put the battery in, the power LED will show amber which means the battery is been charging. It will take about 3 hours to fully charge the battery, and when the battery is fully charged, the power LED will show green. Step 5. Power ON: Turn ON the power switch. Step 6. Connect with a USB 3G modem: Plug your USB modem which is with activated SIM card provided by your 3G service provider. Step 7. Connect with Ethernet Cable Insert the Ethernet cable into RJ45 Ethernet Port on the back panel. And then plug the other end of RJ45 into the computer or Laptop computer. The Ethernet LED will show green color if the Ethernet connection is normally connected. Step 8. Start to configure the device: You can start to configure the device via the Easy Setup Utility . (see Easy Setup Utility) ON
3Chapter 1 Getting Started with Easy Setup Utility There are two approaches for you to set up the WiFi Mobile Router quickly and easily. One is through executing the provided Windows Easy Setup Utility on your PC, and the other is through browsing the device web pages and configuration. 2.1 Easy Setup by Windows Utility Step 1： Install the Easy Setup Utility from the provided CD then follow the steps to configure the device. Step 2： Select Language then click “Next” to continue. Step 3： Then click the “Wizard” to continue. Step 4： Click “Next” to continue.
4Step 5： Select Wireless Enable, and then click “Next” to continue. Step 6： Enter SSID, Channel and Security options, and then click “Next” to continue. Step 7： Select 3G Service by clicking 3G icon to continue.
5Step 8-1： Select “Auto-Detection”, and the Utility will try to detect and configure the required 3G service settings automatically. Click “Next” to continue. Step 8-2： Or you can select “Manual” and manually fill in the required 3G service settings provided by your ISP. Click “Next” to continue. Step 9： The WiFi Mobile Router is rebooted to make your entire configuration take effect.
6Step 10： Click “Next” to test the Internet connection or you can ignore test. Step 11： Click “Next” to test WAN Networking service. Step 12： Setup is completed.

Navigation menu