Advance Security R45 Car Alarm Receiver User Manual

Advance Security Inc Car Alarm Receiver Layout 1

a href="https://usermanual.wiki/Advance-Security" itemprop="url"> Advance Security >

Users Manual

OWNER’SMANUALModels: 4900 Series4961 Series Vehicle ImmobilizersThis device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference; and(2) This device must accept any interference received, including interference that may cause undesired operation.Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications tothis equipment. Such modifications could void the user’s authority to operate the equipment.4900-UM.qxp 4/1/05 16:19 Page 1Per FCC 15.21, you are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment.
Silencer products have been designed to provide the consumer with years of trouble-free operation.This manual will provide reference for the operation and maintenance of your new Silencer vehicleimmobilizer system. Please, take a moment to read this manual so you will be familiar with the opera-tion of your new system.Automatic ArmingOnce you have turned the ignition key to the “Off” position, your Silencer engine immobilizer willbecome armed within 30 seconds. Upon arming, the device will emit 1 soft chirp. Turning the igni-tion back on before 30 seconds will stop the timer and reset it. Note: If your system was supplied with an “Automatic Disarm Transmitter”, you will need to leavethe vicinity of your vehicle (approx. 60 feet) before the automatic arming function will execute.(Remaining in close proximity of your vehicle could prevent it from arming). The distance require-ment may prevent you from hearing the soft arming chirp. DisarmValet OnValet Off3-Button Transmitter23-Button Transmitter: When you return to your vehicle to start the engine, press the “Disarm” but-ton on the 3-button transmitter. When the system is disarmed, the device will emit 2 chirps indi-cating it’s disarmed. 1-Button Transmitter: When you return to your vehicle to start the engine, press the transmitter but-ton. When the system is disarmed, the device will emit 2 chirps indicating it’s disarmed. Manual Disarming1-Button Automatic Disarm Transmitter1-Button Transmitter1-Button Automatic Disarm Transmitter: When you return to your vehicle, at some point, betweena distance of approx. 60 feet and the time you insert your ignition key to start the engine, the auto-matic disarm transmitter will disarm your system. Once disarmed, the device will emit 2 softchirps. No action is required by the operator. Note: In areas of high radio frequency noise, the automatic disarm function of the transmitter mayget blocked and not disarm your system. In this event, press the transmitter button to perform amanual disarm. Automatic Disarming (Automatic Disarm Transmitter Required)Note: Depending on the type of consumer transmitter package your dealer provided you with, youmay have each one of the transmitters pictured above, or two of the same type transmitter.Confirm this with your dealer. 4900-UM.qxp 4/1/05 16:19 Page 2
Download:
Mirror Download [FCC.gov]
Document ID529528
Application IDGV1RI/96XTCikU4yjo3GYg==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize12.75kB (159313 bits)
Date Submitted2005-04-07 00:00:00
Date Available2005-04-07 00:00:00
Creation Date2005-04-01 16:19:47
Producing SoftwareQuarkXPress(tm) 6.0
Document Lastmod2005-04-06 14:20:05
Document TitleLayout 1
Document CreatorQuarkXPress(tm) 6.0
FCC ID Filing: H5OR45

Navigation menu