Advance Security R48 Car Alarm Receiver User Manual RST560AOP

Advance Security Inc Car Alarm Receiver RST560AOP

Contents

Users Manual 1

Download: Advance Security R48 Car Alarm Receiver User Manual RST560AOP
Mirror Download [FCC.gov]Advance Security R48 Car Alarm Receiver User Manual RST560AOP
Document ID615163
Application IDCRB5pChbBviY1vnybowPRw==
Document DescriptionUsers Manual 1
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize9.23kB (115384 bits)
Date Submitted2005-12-23 00:00:00
Date Available2005-12-23 00:00:00
Creation Date2005-12-22 17:28:01
Producing SoftwareAcrobat Distiller 5.0 (Windows)
Document Lastmod2005-12-22 17:28:01
Document TitleMicrosoft Word - RST560AOP.doc
Document CreatorPScript5.dll Version 5.2
Document Author: feva

MARCH/31/2004
MODEL RX300
REMOTE ENGINE STARTER
WITH ALARM SYSTEM
OWNER’S MANUAL
560A
MARCH/31/2004
OPERATION:
A. REGULAR TRANSMITTER OPERATION:
Transmitter
Button
System Function
Remark
Lock Doors & Arm System
(3-second)
Arm and Delete The 2 Stage Shock Sensor
Press twice within 5 seconds.
Car locator
Panic function
Unlock Doors & Disarm System
Two Steps Door Unlock & Disarm System
Upon Armed
Press and Hold for 3 seconds
Silent Arming / Disarming
Channel 3 (Trunk) Timer Control
Passive Arming By-Pass
Activate or Turn Off The Remote Start
(2-second)
Press twice within 3 seconds.
Press and Hold for 2 seconds
While the System disarmed.
Press twice within 3 seconds.
Switching code For 2nd Car Operation.
II
Second Vehicle Security Operation
Your 5-button remote transmitter can be utilized to control a second vehicle security system, To program
the remote control transmitter to a second vehicle, follow the instructions for Transmitter programming. All
programming parameters be the same except for the following:
1. Prior to pushing any button on the transmitter. Press the Select II button first on the transmitter.
2. Once II button is pressed the LED on the transmitter will illuminate for 3.5 seconds.
3. While the LED is illuminated, press any button on the remote control transmitter.
B. LED display:
LED
Off
Slow Flash
Fast Flash
On (Solid)
Function
Disarmed
Armed
Passive Arming
Valet Mode
LED
2 flashes... pause
3 flashes... pause
4 flashes... pause
5 flashes... pause
C. CHIRP INDICATORS:
Chirp
1 chirp
2 chirps
3 chirps
4 chirps
6 chirps
Function
Zone 1: Warn-Away Trigger
Zone 2: Trigger on Trunk/Hood
Zone 3: Trigger on Door Switch
Zone 4: Trigger on Shock Sensor
Zone 5: Trigger on Ignition Switch
D. PARKING LIGHT:
Function
Arm
Disarm
Ajar Warning
Disarm / Triggered
Car Locator
Parking light
1 flash
2 flashes
3 flashes
12 flashes
Constant On
Function
Arm
Disarm
Disarm / Triggered
Car Locator
Under Remote Start
E. ALARM OPERATING CONDITION:
1. Arming
2. Disarming
3. Trigger
4. Panic
5. Car Locator
Siren, Horn
1 or 3 Chirps
2 or 4 Chirps
Alarming
Alarming
6 Chirps
Parking Light
1 Flash
2 or 3 Flashes
Flashes
Flashes
12 Flashes
LED
Doors
Starter Dome Light
Slow Flash Locking
Disable
Fast Flash Unlocking
Turns on for 30-second
Slow Flash
Disable Flashes
Flashes
F. ACTIVE LOCK & ARM:
1. Press
button on the transmitter.
2. The horn will chirp once and parking light will flash once indicating that the system is now armed. The
vehicle doors will lock upon arming when interfaced with the security system.
SILENT ARMING / DISARMING: Press
and
buttons at the same time on the transmitter will arm or
disarm your security system, No chirp sound will be heard, arm / disarm confirmation will be through the
vehicles parking lights only.
AJAR WARNING: If the siren sounds 3 chirps, then you have left a door, trunk, or hood lid ajar. (See Alarm
Feature “I - 4 Programming)
SHOCK SENSOR BY-PASS:
560A
Press
button once: The siren chirps once, the system is armed.
MARCH/31/2004
button a second time within 5 seconds: The siren chirps twice, the Shock Sensor is now
Press
bypassed. The sensor bypass feature is programmed to activate for one arming cycle only. The security
system will return to normal operation during the next arming cycle.
H. PASSIVE ARMING
Active arming / disarming is controlling your security system via the remote transmitter. This security
system is equipped with an optional Passive Arming feature, which allows the security system to arm 30
seconds after the last door is closed. Operation is as follows.
1. Turn the ignition to the “OFF” position and exit the vehicle.
2. After all entrances are closed, the security system LED will flash fast for 30 seconds. If you reopen any
door / hood / trunk, the security system LED will stop flashing. It will begin flashing again once the vehicle
all entrances are closed.
3. After 30-second timer has elapsed, the security system will automatically “ARM”. The siren will chirp [1]
time and the parking lights will flash [1] time.
PASSIVE ARMING WITH PASSIVE DOOR LOCKING (See Alarm Feature “I - 2” Programming):
The vehicle doors will automatically lock after passive arming cycle has been completed.
button twice, the security will
PASSIVE ARMING BY-PASS: While the system disarmed. Press
respond with [1] chirp and LED will turn “ON”. The security system will remain in this temporally state for
button and the system will return to normal
as long as you wish. To exit passive by-pass, press
or
status.
G. ACTIVE UNLOCK & DISARM:
1. Press
button on the transmitter.
2. The horn will chirp twice and parking light will flash twice to indicating that the security system is now
disarmed. The vehicle doors will unlock and dome light wills turns on for 30 seconds upon disarming
when interfaced with the security system.
TAMPER DISARMING: If alarm triggered, upon disarm the system, siren chirp 4 times, parking light flash
3 times.
PATHWAY ILLUMINATION (See Alarm Feature “II - 4” Programming): This feature turns the parking
light “ON” for 30 seconds upon a unlock signal and for 10 seconds upon the lock signal.
TWO STEPS DOOR UNLOCK (See Alarm Feature “III - 3” Programming): This feature will independently
unlock the drives door only when disarming the security system. Pushing the
button a second time
within 3 seconds will unlock the entire vehicle.
AUTOMATIC RE-ARM (See Alarm Feature “I - 3” Programming): If this feature is selected, the security
system will automatically re-arm itself 60 seconds after disarming with remote transmitter. Automatic rearm
will cancel if any door is opened before the 60 seconds timer has elapsed.
H. DISARMING WITHOUT A TRANSMITTER
The Override function may be used if the remote transmitter is lost or inoperative.
1. Enter the vehicle and turn the ignition switch to 'ON’ position.
2. Within 10 seconds push and release the valet switch
The alarm will enter the disarm mode. You can now start and operate the vehicle normally.
I. VALET MODE:
The valet switch allows you to temporarily bypass all alarm function, eliminating the need to hand your
transmitter to parking attendants or garage mechanics. When the system is in valet mode, all alarm
function and remote start functions are bypassed, however the remote panic feature and remote door
locks will remain operational. To use the valet mode, the system must first be disarmed either by using
you remote transmitter, or by operating the Manual override sequence.
Enter Valet Mode:
1. From the disarmed condition, turn the ignition to “ON” position.
2. Push and hold valet switch for 2 seconds until the LED turns on. The LED wills remain on as long as
the system is in 'valet mode'.
Exit Valet Mode:
1. Return to normal operation, turn ignition 'on'.
2. Push and hold valet switch for 2 seconds, The LED wills turns off indicate the system are exiting the
valet mode.
J. PANIC FUNCTION:
The transmitter can be used as a remote panic switch to manually trigger the alarm in case emergency.
button for 3 second. The alarm will immediately sound.
1. Press and hold the
2. During panic mode, the normal function of this transmitter button will be suspended. The
and
buttons can be used to lock and unlock the doors (if the option is installed), however once the
button
560A
MARCH/31/2004
is pressed, the vehicle’s starter disable device, (where installed) will be enable allowing the vehicle to
start.
or
button on the transmitter again for 3 seconds. Also if any
3. To stop the alarm, press and hold
transmitter buttons other than
or
button is pressed and released, the panic mode will be turned
off immediately.
4. If the button is not pressed, the alarm will automatically stop after 30 seconds.
N. TRIGGER THE SYSTEM
When armed, your vehicle is protected as follows:
1.Light impacts will trigger the warn-away signal. A [3] long chirp from siren/horn.
2.Heavy impacts / Doors open / Hood open / Trunk open / Turn on the ignition key will trigger the
programmed sequence.
The starter disable relay (if installed) prevents the vehicle’s starter from cranking. The siren, horn, parking
lights, and dome light will turn on to alerting of an intrusion for 30 seconds. Then it will stop and automatic
reset and re-arm. If the one of sensors or detectors still active, the alarm system will sound a maximum of
6 times of 30 seconds cycles.
K. DOME LIGHT CONVENIENCE DELAY & SUPERVISION (See Alarm Feature III – 2
Programming)
The alarm with a unique feature which will turn on your vehicle dome light as following:
1. Upon disarming, the interior lights will remain on for 30 seconds.
2. If the vehicle is intruded, the interior light will flash for the same duration as the siren.
Note: Turn on the ignition switch or arm the alarm will turn off the dome light.
L. IGNITION CONTROL DOOR LOCKS. (See Alarm Feature II – 2 Programming).
If the vehicles door locks have been interfaced to the security system, the system will automatically lock the
vehicle's doors when the ignition is turned “ON” and /or unlock the vehicle’s doors when the ignition is
turned “OFF”.
M. CHANNEL 3 (TRUNK RELEASE) OUTPUT
Press and hold
electric devices.
button on transmitter for two seconds to remote control the trunk release or other
N. CAR LOCATOR
Press
button while the system armed to active car locator function. The siren will chirp 6 times. The
parking light will flash 12 times, for you to easily locate your car.
REMOTE START OPERATION:
WARNINGS:
As with any product that performs automatic functions, there are certain safety precautions that you must
practice and be aware of.
1. Keep the transmitter out of children’s reach.
2. Do not leave anyone in the vehicle while running on remote control.
3. Alert servicing personnel that the vehicle can be started automatically.
4. Do not start the vehicle by remote while it’s in an enclosed area or garage.
5. Always apply the parking brake and lock the vehicle as you exit the vehicle.
6. The vehicle windows must be rolled up.
7. Should the unit malfunction, disconnect the fuse until the problem is corrected.
8. The use and operations of this system is the sole responsibility of the operator.
9. Some areas may have local ordinances that prohibit leaving a vehicle running on public streets.
10. Do not start the vehicle by remote while the standard transmission vehicle is parked at a steep place.
A. TO REMOTE START THE VEHICLE:
When you want to start your vehicle,
1. Press
button twice on the transmitter.
2. The parking light will activate to indicate the remote start received the signal.
3. The engine will start approximately 5 seconds.
4. Once the engine is running, after couple seconds the parking light will turn on again and climate
controls will activate and adjust the vehicles interior temperature to your preset setting.
5. The vehicle will run for 5 to 30 minute cycle and automatically shut down.
NOTE:
The Remote Start Unit will not start the vehicle if any one of the following conditions exists:
1. The hood is opened.
2. The brake pedal is pressed.
3. Move the optional remote start enable toggle switch to OFF position. (If installed)
560A
MARCH/31/2004
4. The gear selector is in any gear other then “PARK” or “NEUTRAL”
SAFE START (Child safety mode) (See Start Feature I – 5 Programming.)
Factory defaults setting to press the
button twice on the transmitter to start the vehicle. Programming
this feature to eliminate an accidental remote start, when kids enter this transmitter, it enquires:
The user presses the transmitter
and
buttons at the same time to start the vehicle.
B. TO TURN OFF THE REMOTE START:
When the engine is running (by remote start), if you want to stop it,
1. Press
button twice on the transmitter.
2. Move the optional remote start enable toggle switch to OFF position. (If installed)
3. Press the brake pedal
The vehicle will shut down and turn off the parking light to indicate engine stopped.
C. TO OPERATE THE VEHICLE WHILE RUNNING ON THE REMOTE START:
To operate the vehicle while running on the remote start.
1. Insert the ignition key and turn it to “ON” (not the start) position.
2. Press the brake pedal.
Note: If the brake pedal is pressed before the key is in the ON position, the engine will shut down.
D. TEMPORARY STOP FEATURE:
This feature allows the vehicle to remain running after the key has been removed from the ignition. This
feature is useful for occasions when you wish to exit and lock the vehicle for short periods of time, but
would like to leave the motor running and the climate control on.
button twice on the transmitter and the LED indicator will
1. Before turning off the engine, press
flash 3 times to confirm enter.
2. Turn the ignition key to OFF position. (The engine will stay running.)
3. The engine will run until the pre-programmed time elapsed or shutdown input is received.
E. TURBO TIMER MODE: (See Start Feature “I - 6” Programming)
Turbo timer mode keeps the engine running after arriving at you destination for a programmable period of
1/ 3 or 5 minutes, This allows the system’s time to conveniently cool down the turbo after you have left the
vehicle. To activate:
1. While engine is running, place the transmission gear in the park position and pull up the hand brake.
and
buttons at the same time.
2. Before turning off the engine, press and release
-- The parking light wills turn on to indicate the remote start has entered turbo charge mode. -3. Pull off the “Ignition Key” from the key cylinder.
-- Engine keeps running. -4. Exit and secure the vehicle.
-- Engine continues running until the pre-programmed time elapsed. --
F. TIMER START:
This unit can be programmed to start and run the engine every 3 (2) hours. The engine will run for the
programmed run time and then shut down.
IMPORTANT: Timer Start should be used only in open areas, never start and run the vehicle in on
enclosed space as a garage or carport.
3 (2) hours timer start: This feature is design for an extreme cold climate usage. The system will auto
start the vehicle every 3 (2) hours, to prevent engine freezing and hard to start. A MAXIMUM OF SIX
CYCLES CAN OCCUR.
ENTER:
1. Press
button twice to remote start the vehicle. As soon as the vehicle is running and the parking light
have turned on or flashing.
button once, within 2 seconds
2. Immediately depress
3. Rapidly depresses
button. The parking light will flash (3) times. The siren or horn chirps (3) times.
The vehicle is now programmed to start every 3 (2) hours.
4. Press the brake pedal to stop the vehicle running.
Exit the timer start:
Timer start can be exited manually as follows:
1. Make sure the remote start system is not operating the engine.
2. Turn the ignition on. The LED and parking light will flash (4) times. The siren or horn chirps (4) times.
Or
button twice to remote start the vehicle. As soon as the vehicle is running and the parking light
1. Press
have turned on or flashing.
560A
MARCH/31/2004
2. Immediately depress
button then press and hold
button for 2 seconds. The parking light will
flash (4) times. The siren or horn chirps (4) times. The vehicle is no longer programmed to start
automatically.
G. SHUT-DOWN INPUT FOR REMOTE STARTER:
If any of the following conditions exist while the system is operating, the engine will not start or will shut
down immediately:
1. The hood is opened.
2. The brake pedal is pressed.
3. Move the optional remote start enable toggle switch to OFF position. (If installed)
4. Engine is over-revved. {“Tachometer checking type” only}
5. The pre-programmed run time (5 /10 / 20 / 30 minutes) has elapsed.
button twice on the transmitter.
6. Press
7. The vehicle refused to start running after {3} unsuccessful attempts.
H. DISABLING THE REMOTE START SYSTEM: (If installed)
This feature allows your system’s remote start unit to be temporarily disabled to prevent the vehicle from
being remote started accidentally. This feature is useful if the vehicle is being serviced or stored in an
enclosed area. To disable the remote start, move the optional remote start enable toggle switch to the OFF
position.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions.
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including interference that may cause undesired
operation.
Per FCC 15.21, you are cautioned that changes or modifications not expressly approved by the part
responsible for compliance could void the user’s authority to operate the equipment.
560A

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2005:12:22 17:28:01+08:00
Modify Date                     : 2005:12:22 17:28:01+08:00
Page Count                      : 6
Creation Date                   : 2005:12:22 09:28:01Z
Mod Date                        : 2005:12:22 09:28:01Z
Producer                        : Acrobat Distiller 5.0 (Windows)
Author                          : feva
Metadata Date                   : 2005:12:22 09:28:01Z
Creator                         : feva
Title                           : Microsoft Word - RST560AOP.doc
EXIF Metadata provided by EXIF.tools
FCC ID Filing: H5OR48

Navigation menu