Advance Security T09 Car Alarm Transmitter User Manual

Advance Security Inc Car Alarm Transmitter Users Manual

Users Manual

6704 FIVE-BUTTON TRANSMITTERThis transmitter is a replacement RF transmitter. The transmitter comes with 4push-button and one side small button.1). Press button I to control first receiver (channel 1).2). Press button II to control second receiver (channel 2).3). Press button III to control third receiver (channel 3)4). Press button IV to control fourth receiver (channel 4).5). The side button provides four independent channels to control appliancesthrough single transmitter. Pressing the side button to “shift” the buttons tothe nest set of the four channels (channel 5, 6, 7 and 8).TRANSMITTER BATTERY REPLACEMENTIf the range of your transmitter deteriorate, it is possible that you need toreplace the battery.1). Release the screw from the back of transmitter and remove uppertransmitter case with a phillips screwdriver.2). Remove old battery from transmitter.3). Install a new battery (12 volt) noting the (+) and (-) marks in the batteryarea of the transmitter.4). Replace upper transmitter case with care, don’t damage the insidecomponents.5). Tighten the screw on the back of transmitter.This device complies with part 15 of the FCC rules. Operation is subject to thefollowing two conditions.(1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interferencethat may cause undesired operation.

Navigation menu