Advance Security T11 User Manual

FOUR-BUTTON TRANSMITTER

The 6906 transmitter is a replacement RF transmitter. The transmitter comes with 4

push-button switches.

1). Press LOCK push-button switch on control first receiver (Your alarm system).

2). Press UNLOCK push-button switch to control second receiver (It can be an alarm

system or electric device).

3). Press TRUNK push-button switch to control third receiver (It can be an alarm

system or electric device).

4). Press PANIC push-button switch to control fourth receiver (It can be an alarm

If the range of your transmitter deteriorate, it is possible that you need to replace the

battery.

1). Release the screw from the back of transmitter and move upper transmitter case.

2). Remove old battery from transmitter.

3). Install a new battery (12 volt) noting the (+) and (-) marks in the battery area of the

transmitter.

4). Replace upper transmitter case with area, don’t damage the inside components.

5). Tighten the screw on the back of transmitter.

following two conditions.