Advance Security T24 Car Alarm Transmitter User Manual VM KEM1 CPU

Advance Security Inc Car Alarm Transmitter VM KEM1 CPU

User Manual

Download: Advance Security T24 Car Alarm Transmitter User Manual VM KEM1  CPU
Mirror Download [FCC.gov]Advance Security T24 Car Alarm Transmitter User Manual VM KEM1  CPU
Document ID576490
Application IDBgJDr4+PbsRo/3L8opUkeg==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize12.13kB (151590 bits)
Date Submitted2005-08-30 00:00:00
Date Available2005-08-29 00:00:00
Creation Date2005-08-18 10:06:52
Producing SoftwareAcrobat Distiller 5.0 (Windows)
Document Lastmod2005-08-18 15:50:47
Document TitleVM-KEM1 CPU 功 能 說 明
Document CreatorAcrobat PDFMaker 5.0 for Word
Document Author: Flower

VM-KEM1 MANUAL
1. Power On Status: All function Off
2. Learn-in Code:
1. Turn IGNITION OFF to ON (open for 15 seconds)
2. Press VALET SW.OFF/ON 3 times, LED ON turned on and activate learn-in-Code MODE.
2.1 Press Btn”1” to learn the first TX.
2.2 ---- Horn 20ms, one Beep, Press LED OFF/ON once.
2.3 Other Keys automatically activated.
2.4 Back to 2.2.1 learn the next TX, up to 4 TX code.
3. Turn IGN ON to OFF, or 15seconds time-out, ending learn-in-code process: LED OFF
3. Common TX function
TX BUTTON
FUNCTION
Unlock Door
REMARK
Horn 1 Chirp(2 times/3sec ,20ms) P/L 1 flashing, D/HT
Dimming .
P/L 2 flashing, D/HT On, Dimming after 30 seconds
2-Step Unlock
Press 2 times in 3seconds
Lock Door
AUX
Silent Lock / Unlock / DUL#2 Press 2 keys at the same time
0.5 sec Trunk (CH#2)
0.5sec On / 0.5sec Off (Exit Light)
3 sec PANIC
Horn Chirping, P/L flashing 60sec, without D/L,D/UL,
(0.3”On/0.75”Off)
with CH#2
4. FEATURE PROGRAM: ★★: RED part is Default Setting
4.1 IGN OFF TO ON (open for 15 Sec),VALET SW ON/OFF(6 times), finished in 15 Sec.
4.2 Chirp 6 Beep, LED ON, proceed Setup, as below circumstance
4.3 IGN OFF shutdown FEATURE Mode, Horn Chirp 1 short-sound 1long-sound
4.4 FEATURE TABLE
Press TX One Chirp ,
2 Chirps ,
3 Chirps ,
4 Chirps,
Btn X LED 0.3
LED 0.3 - 2 pulse
LED 0.3 - 3 pulse
LED 0.3 - 4 pulse
Ign “On” TX No
If Ign”On”(AUX, PANIC)
Ign “On”TX activates
function
Rearm Off
Rearm On
Exit Light On 3
Exit Light On 5
Exit Light On 10
Exit Light On 15
AUX
minutes
minutes
minutes
minutes
5 Chirps ,
Exit Light On 20
LED 0.3 - 5 pulse
minutes
5. D/HT Function: Dimming Time 5 sec
5 -1. Door Open / Close = D/HT On 20 sec, then Dimming .
5 -2. Remote Door Unlock = D/HT On 30 sec, then Dimming .
5 -3. Ext Car Remote Lock The Door then Dimming
5-4. Ign On D/HT Off then Dimming
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions.
(1)This device may not cause harmful interference, and
(2)This device must accept any inte rference received, including interference that may cause
undesired operation.
Per FCC 15.21, you are cautioned that changes or modifications not expressly approved by the part
responsible for compliance could void the user’s authority to operate the equipment.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2005:08:18 15:50:47+08:00
Create Date                     : 2005:08:18 10:06:52+08:00
Page Count                      : 2
Creation Date                   : 2005:08:18 10:06:52+08:00
Mod Date                        : 2005:08:18 15:50:47+08:00
Producer                        : Acrobat Distiller 5.0 (Windows)
Author                          : Flower
Metadata Date                   : 2005:08:18 15:50:47+08:00
Creator                         : Flower
Title                           : VM-KEM1  CPU  功 能 說 明
Page Mode                       : UseNone
Has XFA                         : No
Tagged PDF                      : No
EXIF Metadata provided by EXIF.tools
FCC ID Filing: H5OT24

Navigation menu