Advance Security T29 Car Alarm Transmitter User Manual

Advance Security Inc Car Alarm Transmitter PLUS4700 UM qxp

a href="https://usermanual.wiki/Advance-Security" itemprop="url"> Advance Security >

Users Manual

OWNER’SMANUALModel: PLUS-4800For Technical Assistance, please call (800) 638-3600,or visit www.magnadyne.comRVehicle SecurityPLUS-4800-UM.qxp 2/7/05 2:43 PM Page 1CA-RC6HF
2Congratulations on your purchase of a quality Carbine automotive security system. Carbine automotivesecurity products have been designed to provide the consumer with a product that is technologicallysuperior and will provide years of trouble free operation.The information enclosed will provide a ready reference of the operation and maintenance of your newsecurity system. Remote Control Transmitters1. Exit the vehicle and close all entrances.2. Press and release the LOCK button. The security system will respond as follows:A. The horn/siren will chirp one time. B. The LED indicator will begin to flash at a steady rate.C. The parking lights will flash one time.D. The starter disable device will become armed and the vehicle engine will not crank. E. All protected entrances are armed. Note: If the dome light is on or a sensor is active at the time you arm your security system, you will hearthe horn/siren beep one time and then you will hear another beep from the horn/siren about 5 secondslater. The second beep is the active sensor warning indicator. This second beep tells you that the alarm isarmed but one of the sensors has been temporarily deleted because it was “On” at the time the alarm wasarmed. The security system is now fully armed!Security System Operation: (using the transmitter to arm the security system)ABNote: The following information is valid only if your security system has been programmed toautomatically arm. 1. Turn off the ignition key and exit the vehicle.2. Close all protected entrances. After the last protected entrance is closed the horn/siren will chirp onetime and the LED indicator will begin to flash fast. The fast flashing LED indicates that the automaticarming timer is counting down and the security system will become armed within 30 seconds. After30 seconds has passed, the security system will respond in the following manner:Automatic Arming (without using the transmitter)LockUnlockPanicAuxRegular TransmitterLock UnlockPanic AuxPassive Transmitter(Optional)PassiveUnlockingPLUS-4800-UM.qxp 2/7/05 2:43 PM Page 2
Download:
Mirror Download [FCC.gov]
Document ID521096
Application ID0BENjmwkc6v3dw7wA1fT4w==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize57.97kB (724577 bits)
Date Submitted2005-03-07 00:00:00
Date Available2005-03-07 00:00:00
Creation Date2005-02-07 14:43:40
Producing SoftwareQuarkXPress(tm) 6.0
Document Lastmod2005-02-25 17:22:03
Document TitlePLUS4700-UM.qxp
Document CreatorQuarkXPress(tm) 6.0
FCC ID Filing: H5OT29

Navigation menu