Advance Security T42 Car Alarm Transmitter User Manual AX901 owners revA

Advance Security Inc Car Alarm Transmitter AX901 owners revA

User manual

1IMPORTANT NOTE: The operation of the Security and Convenience System as described in this manual isapplicable to most vehicles. However, due to the configuration of some vehicles, some functions AND/OR SAFETYPRECAUTIONS may not apply. Please see your installing dealer for more information.PROPLMOwner's Manual Remote Vehicle Securityand Keyless EntrySystem
2Table of ContentsFeatures and Benefits............................................................... 3Using Your Remote Control ....................................................... 4Arming the systemPre-arm modeDisarming the systemTwo stage unlockConfirmation chirpsCar FinderPersonal protection alarmTrunk releaseUsing Your Remote Control, Continued ................................... 5Using valet modeAutomatic Convenience Options ............................................. 5Automatic armingIgnition lockignition unlockWhen Your Security System is Triggered ............................... 5When Your Security System is Triggered, Continued ............ 6Attempted Intrusion identificationEmergency Disarm Procedure................................................. 6System Maintenance ................................................................ 6Changing the remote control batterySystem Maintenance, Continued ............................................. 7Adding remote controlsDeleting remotesBasic Troubleshooting .............................................................. 7Warranty .................................................................................... 8
3Features and Benefits Two Easy-to-Use Weather-Resistant Remote ControlsThe remote controls included the PROPLM Security System utilize durable, moisture resistant cases andsealed rubber buttons for reliability and long life. Rolling code technology prevents the transmitter signalsfrom being duplicated. The button functions are clearly labeled to make the system easy to operate. All Entrances ProtectedOpening any door or entrance protected by the security system triggers the vehicle’s horn and flashes theparking lights. Starter DisableThe PROPLM Security System protects your vehicle from theft by disabling the starter when the system isarmed. Interior Theft SensorThis sensor guards against vehicle body damage, theft of vehicle equipment (such as air bags), andpersonal belongings inside the vehicle. Remote Keyless EntryThe PROPLM Security System conveniently locks and unlocks the vehicle’s doors and opens the trunk orhatch by remote control.* Personal Protection FeaturesRemote Panic Alarm is among an array of features that enhance personal safety.** Interior Status IndicatorThe LED warning light is an effective visual deterrent to a would-be thief. Progressive Car FindUse the Car Find feature to locate your vehicle in a crowded parking lot.IMPORTANT NOTE: The operation of the PROPLM Security System as described in this manual is applicable to mostvehicles. However, due to the engine type and configuration of some vehicles, some functions AND/OR SAFETYPRECAUTIONS may not apply. Please see your installing dealer for more information.* If vehicle is equipped with power door locks and they are connected to the alarm system by your installer.** May require additional connections, components, and/or charges. See your installer for details.
4Using Your Remote Control Arming the Security SystemTo arm the system, exit the vehicle, close all doors, then press the LOCK button on the remote control.The system will flash the parking lights 2 times, indicating the system is armed, has locked the doors(if equipped and connected) and activated the starter disable feature. The status indicator (LEDwarning light) will blink steadily, once per second. Pre-arm ModeIf the system sounds 1 time and the parking lights flash only 1 time, this indicates that the vehicle’sinterior light is on or an entrance is left open. Check to see that all doors hood and trunk are closedproperly. Once all entrances are secured (and the interior light is off), this system will sound/flashagain. The system is now fully armed. (If the entrance is not secured within 4 minutes, the system willarm and ignore the unsecured entrance until it is closed.) Disarming the Security SystemTo disarm the system press the UNLOCK button. The system will flash the parking lights 1 time, andthe doors will unlock (if equipped and connected). Two Stage Door Unlock (Optional)If this feature is enabled on your system, pressing the UNLOCK button one time on the remote controlwill unlock only the driver’s door. Press UNLOCK again to unlock the remaining doors. Disabling/Enabling Confirmation ChirpsThis feature must be turned ON or OFF in system programming, see your installing dealer for details. Using the Progressive Car Finder FeaturePress the CAR FIND/PANIC button on the remote control to locate your vehicle. The system will sound5 times at low volume increasing in volume each of 3 times the button is pressed. Using the Personal Protection Alarm (Panic)Press and hold the CAR FIND/PANIC button on the remote control for 2 seconds to activate thepersonal protection alarm. The system will sound for 30 seconds. Pressing any button on the remotecontrol will turn the personal protection alarm off. Activating the Trunk Release Feature (Optional)If this feature is enabled on your system, pressing and holding the TRUNK button on the remote controlfor 2 seconds will open the vehicle’s trunk or hatch.*Throughout this manual, ‘press’ refers to pressing for less than 1 second; ‘press and hold’ refers to pressing for morethan 2 seconds.
5Using Your Remote Control, continuedUsing Valet ModeTo engage valet mode:1. Turn the ignition key ON/OFF, ON/OFF, ON/OFF.2. The LED will flash 2 times quickly then pause indicating that the system is in valet mode.When valet mode is activated all security functions will be disabled.To disengage valet mode:1. Turn the ignition key ON/OFF, ON/OFF, ON/OFF.2. The LED will turn off indicating that the system has exited valet mode.Automatic Convenience OptionsThe PROPLM Security System performs a variety of automatic functions to enhance security and comfort.Some of these features are programmable at the time of installation. Please see the installing dealer fordetails. Automatic ArmingThe PROPLM Security System will arm automatically 1 minute after the ignition is turned off. This featurecan be temporarily disabled by placing the system into Valet mode. (if option is selected) Ignition LockIf all doors are closed and the vehicle’s ignition is turned on, the doors will lock automatically. Ignition UnlockWhen the ignition is turned off, the doors will unlock automatically. Silent ChoiceWhen this feature is selected in programming, the system will arm and disarm without sounding the horn.When Your Security System is TriggeredThe PROPLM Security System will trigger if one of the following events occurs while the system is armed:•Any protected entrance is opened.•The vehicle ignition is turned on.•The vehicle is jolted hard enough to signal the impact sensor.Once the alarm is triggered, the horn will sound and the vehicles parking lights will flash for 30 seconds. Thesystem will then re-arm, awaiting the next intrusion attempt.
6When Your Security System is Triggered, Continued Attempted Intrusion IdentificationPressing UNLOCK after a full 30 second trigger cycle has completed, the horn will honk 4 times and theLED will flash a number of times to indicate which input triggered the alarm. Turning on the ignition orpressing the valet/override button will reset the LED flashes, pressing the valet/override button will alsohonk the horn to match the LED flashes before it resets.Number of flashes:1 - Interior Theft Sensor (Shock Sensor)2 - Door Input3 - Hood Input4 - Trunk Input5 - IgnitionEmergency Disarm ProcedureIf your remote control is lost or fails to function, use this procedure to disarm the MM1 Security System andstart your vehicle.1 - Use the keys to enter the vehicle. The alarm will sound once the door is opened.2 - Insert the key into the ignition and turn to the ON position.3 - Locate and press the emergency override button. The alarm will turn off and then you will be ableto start the vehicle.Your Emergency Override Button is Located:_________________________________________System Maintenance Changing the Remote Control Battery The 3 volt lithium battery (model CR2032) inside each remote control should last approximately 1 yearunder normal use. When the battery becomes weak you will notice the remote control range (the distancefrom the vehicle the remote control will work) deteriorate and the small LED on the remote control will dim.To replace the remote control batteries:1. Gently unsnap the halves of the remote control apart using a small flat head screw driver.2. Unsnap the lithium battery out of the circuit board, observing the +/- symbols on the batteryand replace with a new lithium 3 volt battery (model CR2032)3. Gently snap the halves of the remote control back together.4. Test operation of the remote control.
7System Maintenance, Continued Adding Remote Controls to Your System The PROPLM Security System has the ability to operate from up to 4 remote controls. Follow these steps toadd a remote control to your system.1. Make sure the system is disarmed and the ignition is off.2. Turn the ignition on.3. Press and hold the override button. After 10 seconds the system will chirp 3 times indicating thesystem has entered programming mode.4. Release the button.5. Press the LOCK button on the remote to be programmed. The horn will sound once, indicating thatthe system has learned the remote.6. Repeat step 5 for any addition remote controls.7. Turn the ignition off to exit the programming mode. Deleting Lost or Stolen Remote Controls from Your System If one of your remote controls is lost or stolen, follow these steps to remove it from your system:1. Have all of the remaining remotes available2. Enter the remote control programming mode by following steps 1-4 from Adding Remote Controlsto Your System shown above.3a. If you only have 1 remaining remote, press the LOCK button 4 times, pausing for one secondbetween each press. The horn must honk each time you press the button.3b. If you have 2 remaining remotes, press the LOCK button on each remote 2 times, pausing forone second between each press. The horn must honk each time you press the button.3c. If you have 3 remaining remotes, press the LOCK button on the first remote 2 times and 1 timeon the following 2 remotes, pausing for one second between each press. The horn must honk eachtime you press the button.4. Turn the ignition off to exit the programming mode. The lost or stolen remote will no longer operatethe system.Basic Trouble ShootingSymptom Problem SolutionRemote does not work: Weak or dead battery. Change battery.Remote not programmed. Program remote.System will not arm: Door or entrance is open. Close entrance.Courtesy light is on. Turn courtesy light off.System is in Valet mode. Exit Valet mode.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions. 1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation. Per FCC 15.21, you are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment.

Navigation menu