Advance Security T51 Car Alarm Transmitter User Manual one sheet E4 operations
Advance Security Inc Car Alarm Transmitter one sheet E4 operations
User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1480896 |
| Application ID | 7+f+IMoNZkyw5O5ExvEv6A== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 12.4kB (155034 bits) |
| Date Submitted | 2011-06-09 00:00:00 |
| Date Available | 2011-06-09 00:00:00 |
| Creation Date | 2011-04-20 13:40:53 |
| Producing Software | Acrobat Distiller 8.2.6 (Windows) |
| Document Lastmod | 2011-05-04 13:59:21 |
| Document Title | Microsoft Word - one sheet E4 operations.doc |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | ogrunhold |
ACTIVE ARMING – LOCK & ARM: TX731A 1. Press button on the transmitter. 2. The siren will chirp once and parking light will flash once indicating that the system is now armed. The vehicle’s doors will lock upon arming if interfaced with the security system. DEFECTIVE SENSOR REMINDER: If the siren sounds 3 chirps, then you have left a door, trunk, or hood lid ajar. and buttons SILENT ARMING / DISARMING: Press the transmitter at the same time. This will arm or disarm your security system, No chirp sound will be heard, arm / disarm confirmation will be through the vehicles parking lights only. button two times within 5 seconds will SENSOR BY-PASS: Press the arm the security system and by-pass the shock sensor. HIDDEN ALARM FUNCTION: Silent Alarm button first; within 3 seconds press the button to activate Press the the hidden alarm function. The security system will arm and with “Hidden Alarm Mode” The siren / horn will be silenced even if the sensor is triggered in the armed mode. Alarm indication will only appear on the LCD Transmitter. PASSIVE ARMING (Programmable) Active arming / disarming is controlled by your security system via the remote transmitter. This security system is equipped with an optional Passive Arming feature which allows the security system to arm 30 seconds after the last door is closed. Operation is as follows. 1. Turn the ignition to the “OFF” position and exit the vehicle. 2. After all entrances are closed, the security system LED will flash fast for 30 seconds. If you reopen any door / hood / trunk, the security system LED will stop flashing. It will begin flashing again once all vehicle entrances are closed. 3. After the 30-second time has elapsed, the security system will automatically “ARM”. The siren will chirp [1] time and the parking lights will flash [1] time. PASSIVE ARMING WITH PASSIVE DOOR LOCKING The vehicle doors will automatically lock after the passive arming cycle has been completed. PASSIVE ARMING BY-PASS: While the system is disarmed, Press the button twice, the system will respond with [1] chirp and LED will turn “ON”. The security system will remain in this temporary state for as long as you wish. To exit passive by-pass, press the transmitter or buttons and the system will return to normal status. ACTIVE DISARMING – UNLOCK & DISARM: button on the transmitter. 1. Press 2. The siren will chirp twice and the parking lights will flash twice indicating that the security system is now disarmed. The vehicle’s doors will unlock. TAMPER DISARMING: If the alarm is triggered, upon disarm the system’s siren will chirp 4 times, and the parking lights will flash 3 times telling you the alarm has been triggered during the last armed state. PATHWAY ILLUMINATION: When receiving an unlock /disarm signal, this feature will turn the parking lights “ON” for 30 seconds and for 10 seconds upon the lock signal. (Programmable) AUTOMATIC RE-ARM: If this feature is selected, the security system will automatically re-arm itself in 60 seconds after disarming with remote transmitter. Automatic rearm will cancel if any door is opened before the 60 seconds timer has elapsed. DISARMING WITHOUT A TRANSMITTER: The Override function may be used if the remote transmitter is lost or inoperative. 1. Enter the vehicle and turn the ignition switch to the 'ON’ position. 2. (Alarm will sound.) 3. Within 10 seconds push and release the valet switch. The alarm will stop sounding and enter the disarm mode. You can now start and operate the vehicle normally. VALET MODE: (System is in Disarm Mode) The valet switch allows you to temporarily bypass all alarm function, eliminating the need to hand your transmitter to parking attendants or garage mechanics. When the system is in valet mode, all alarm functions and remote start functions are bypassed, however, the remote panic feature and remote door locks will remain operational. To use the valet mode, the system must first be disarmed either by using your remote transmitter, or by operating the Manual Override sequence. a). Under disarm mode, turn the ignition to “ON” position. b). Press and hold valet switch for 2 seconds until the LED turns ON solid. The LED will remain on as long as the system is in 'valet mode'. Exit Valet Mode: a). Turn ignition 'ON'. b). Push and hold valet switch for 2 seconds, The LED will turn off indicate the system are exiting the valet mode. CAR LOCATOR button to active car locator function. The Under armed mode, press the siren will chirp 6 times. The parking light will flash 12 times, for you to easily locate your car. PANIC FUNCTION: The transmitter can be used as a remote panic switch to manually trigger the alarm in case of emergency. Press and hold the sound. button for 3 second. The alarm will immediately button on the remote control. To stop the alarm, press the trunk If the button is not pressed, the alarm will automatically stop after 30 seconds. TRIGGER THE SYSTEM When armed, your vehicle is protected as follows: Light impact will trigger the warn-away signal. Heavy impacts / Doors open /(if installed) Hood open / (if installed) Trunk open / Turning on the ignition key will trigger the programmed sequence. The starter disable relay (if installed) prevents the vehicle’s starter from cranking. The siren, horn, parking lights, and dome light will turn on alerting of an intrusion for 30 seconds. Then it will stop and automatic reset and rearm. If the any one of the sensors or detectors is still active, the alarm system will sound a maximum of 3 times of 30 seconds cycles. NOISE ABATEMENT CIRCUIT: Your system has a “Noise Abatement Circuit”. It prevents annoying repetitive trigger sequences due to faulty door pin switches or environmental conditions such as thunder, jackhammers airport noise, etc. Here’s how “Noise Abatement Circuit” works: The alarm triggers five times. Each time, the same sensor or switch has triggered the alarm; the “Noise Abatement Circuit” will interpret this pattern of triggers as a false alarm. After the third trigger, the “Noise Abatement Circuit” ignores, or bypasses, that sensor or switch until a different sensor or switch is trigger. ADVANCED USER’S MODE: LCD REMOTE TRANSCEIVER OPERATION: Transmitter button Press LCD Press & Hold U 01 Press & Hold CHANNEL5 TIMER CONTROL OUTPUT: and buttons at the same time to active Press the transmitter Channel 4 function. Channel 5 is user-programmable timer output. You may program the builtin timer to send a ground signal for any time duration from 1 second to 120 seconds. For instance, this timer output may be used to turn on the headlight, power window or sunroof. Complete adjust “Hour, “Press button. chirp is heard) LCD display show U: 01 = enter 1 or adjust parking “Minutes” (value from 0 to 30). programming of LCD Remote button complete count Press down timer setting. Press button Press button = check the vehicle’s status. Press button Press & hold button Press button = check the system for Full battery icons flash Power Save mode : ON ? OFF LCD remote transceiver uses “0” current to save the battery power. seconds (chirp x 3) trigger condition Press button Press button = check the vehicle’s temperature. Press button PRESS button FOR OPTION OF CAR 1 / CAR 2 Press & hold button for 2 sec. = Button Lock Press & hold button for 2 sec. Button Press & hold on button Lock On (1 beep) / Off (2 beep, default = for 2 sec. button for 2 sec. Vibrator or Melody mode selection (default = Melody) Press hold Press & hold button for 2 sec. Count Down button for 2 sec. Fast Timer (Off 10m/ 20m/30m/1HR / 1.5HR / 2HR) Press & hold button Press & hold for 2 sec. button for 2 sec. Button Beep Sound mode Enable (1 beep) / Disable (2 beeps, default = disable) Table 2: two beeps to confirm Transmitter button Press & hold button LCD Display System feature & remark clock time adjust for 3 seconds (Two chirps will be heard) 12 is flashing or button to decrease or increase “Hour” digit, adjust hour from 0 to 12. Complete adjust “Hour, “Press button. 00 is flashing or button - Adjusts clock “Minute” from 0 to 59. Press setting. 12 is flashing button complete clock or button to decrease or increase “Hour” digit, adjusts clock hour from 0 to 12. Complete adjust “Hour, “Press button. ANTI CAR- JACKING (Programmable) Warning: If you don't need the carjacking function in this alarm system, be sure to set carjacking feature “OFF”. This systems default setting is “OFF” for all carjacking modes. Exit : Press buttons or not press any button within 10 seconds, it will exit remote programming mode automatically. Low Battery Indication: When the power of the battery weakens, it has two short “bi” sound and flash icon while pressing the button of the LCD screen transceiver. Off) Press & hold Alarm Clock adjust Please download the complete manual for this and other advanced functions. for 2 seconds (chirp one time ) Clear the Flashing Icon and Melody Sound: The Transmitter will reset the flashing icons the next time the Ignition is cycled to the ON position. Stopping The Trigger Melody Sound: When the alarm is triggered, the LCD screen will alert the user through a melody sound and a flashing trigger icon. Press any button on the LCD remote transmitter to stop melody sound only. or adjust parking “Hour” (value from 0 to 2). for 2 seconds (until 1 CHANNEL4 TIMER CONTROL OUTPUT: Press the transmitter and buttons at the same time to active Channel 4 function. Channel 4 is user-programmable timer output. You may program the builtin timer to send a ground signal for any time duration from 1 second to 120 seconds. For instance, this timer output may be used to turn on the headlight, power window or sunroof. 0 :00 0 is flashing Backlight turns on for 3 seconds SYSTEM’S TRIGGER CHECK (For two-way transceiver operation only) Press and hold F button of LCD remote until 3 beeps sound , release and re-press F button again, the LCD remote will show “ALARM “ icon flashing button to activate on text area (see advanced users mode), then press system trigger check. SYSTEM’S STATUS CHECK (For two-way transceiver operation only) Press F button of LCD remote until 3 beeps sound , the LCD remote will show “STATUS “ icon flashing in the text area (see advanced users button to activate system status check. mode), then press It responds with one melody sound and all vehicles’ status records will immediately displayed on the LCD screen. Note: If it has no response then you are out of range. button on the transmitter for two TRUNK RELEASE: Press and hold seconds to remotely control the trunk release. Count Down Timer setting Feature & remark or button - Adjusts clock “Minute” from 0 to 59. 00 is flashing Press setting. button complete Alarm clock Stop The Trigger Melody Sound: While triggering the alarm the LCD screen will alert user through melody sound and flashing trigger icon, press any button on the LCD remote transmitter to stop melody sound only, the remote control buttons will not send a command to the system. REMOTE TRANSMITTER OPERATION: QUICK START USERS GUIDE If you do not understand any part of this quick start users manual and would like the complete version, Transmitter Button Car Locator CH 3 Activate Channel 3 12:00 Time Monitor Activate Channel 4 12:00 Alarm Clock Alarm clock set. Arm and Delete The 2 Stage Shock Sensor Parking Meter Parking meter reminder time. The unlock icon will be displayed when the system is disarmed. Driver paging Someone is paging you in your vehicle Valet Mode Remote start and alarm functions temporarily disabled Hood Trigger Hood is illegally opened (Zone 1) Trunk Trigger Trunk is illegally opened (Zone 2) Door Open Warning Doors are illegally opened (Zone 3) Sensor Trigger Trigger on shock Sensor 1 (Zone 4) Ignition Trigger Ignition switch illegally turned (Zone 5) System trigger is on Remote Transmission You are transmitting to the control unit. Anti Car-Jack Mode Activated In – Range Indicator You are within the range of the remote control. Button Lock (icon on) Press and Hold for 3 seconds. Press Trunk button to stop panic function Press when in armed mode Panic function Encore E-7 LCD Remote Transceiver The lock icon will be displayed when system is ARMED Remark Lock Doors & Arm System The complete manual is necessary for advanced users and not all user functions are covered in this quick start guide. STANDARD LCD ICON CONFIGURATIONS: System Function Pressing the Star and trunk buttons together Briefly will turn ON the Low Battery You have to change the battery of remote control. Power Save (battery icon full bar flash) BATTERY CHANGING: Depending on the usage, the remote batteries should be changed at least once a year in the one way remote and once every 4-8 months for the two-way remote. The 1-way remote, (E-7s) is powered by a pair of 3V, CR2016 batteries. These batteries are available at most locations batteries are sold and can be replaced by the user. Battery Level Indicator (2-way remote) The Battery Level indicator has three level indicators that serve as a visual indication of battery charge. When the battery reaches a low charge level that requires changing, the remote control will generate a single notification chirp, and the Battery Level indicator will flash continuously. If the battery voltage is LOW, the range of the remote will be reduced by 50% to conserve battery life. The two way remote requires 2, 3 Volt CR2032 batteries. The operation lives of these batteries are affected by many factors including, temperature, usage, back-light ON time and programmable “in range status settings”. Do not allow these batteries to corrode or become wet for any extended period of time. Arm System and Silent Alarm Function Silent Arming / Disarming Active Anti Car-Jacking Mode Unlock Doors & Disarm System Two Steps Door Unlock & Disarm System (optional) Trunk Release (Channel 3) Passive Arming By-pass Channel # 4 Timer Output (4) Channel # 5 Timer Output (5) Turn ON the backlight Press twice within 3 seconds. Press and Hold for 2 seconds While the system Disarmed. Optional Optional Two-way remote Switching code For 2nd Car Operation. CHIRP INDICATORS: Chirp 1 chirp 2 chirps 3 chirps 4 chirps 6 chirps Press twice within 3 seconds. Pass will appear on the remote Press within 3 seconds and Hold the button Ignition in "off" position. Ignition in "on" position press and hold for 2 seconds For one way remote transmitter PARKING LIGHT: Function Arm Disarm Defective Reminder Disarm / Triggered Car Locator Parking light 1 flash 2 flashes 3 flashes 12 flashes Constant On Function Arm Disarm Disarm / Triggered Car Locator Under Remote Start ALARM OPERATING CONDITION: 1. Arming 2. Disarming 3. Trigger Siren / Parking Horn Light 1 or 3 1 Flash Chirps 2 or 4 2 or 3 Chirps Flashes LED Doors Starter Slow Flash Locking Disable Alarming Flashes Slow Flash Turns on for 30 second Unlocking 4. Passive Starter Fast Flash Disable 5. Panic Alarming Flashes 6. CarAlarming Flashes Jacking 7. Car 12 6 Chirps Locking Locator Flashes Dome Light Disable Flashes Disable Flashes Disable Flashes FCC COMPLIANCE This device complies with Part 15 of the FCC rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including any interference that may cause undesired operation. Warning! Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Create Date : 2011:04:20 13:40:53-07:00 Modify Date : 2011:05:04 13:59:21+08:00 Producer : Acrobat Distiller 8.2.6 (Windows) Mod Date : 2011:05:04 13:59:21+08:00 Creation Date : 2011:04:20 13:40:53-07:00 Author : ogrunhold Creator Tool : PScript5.dll Version 5.2.2 Metadata Date : 2011:05:04 13:59:21+08:00 Document ID : uuid:448d4cdf-e66a-4c7f-91b9-024f694abb1b Instance ID : uuid:776727cf-f2df-4b47-8671-a5eb22da8875 Format : application/pdf Title : Microsoft Word - one sheet E4 operations.doc Creator : ogrunhold Page Count : 3 Has XFA : NoEXIF Metadata provided by EXIF.tools