Advance Security T52 Car Alarm Transmitter User Manual

Advance Security Inc Car Alarm Transmitter

User manual

Download: Advance Security T52 Car Alarm Transmitter User Manual
Mirror Download [FCC.gov]Advance Security T52 Car Alarm Transmitter User Manual
Document ID1555648
Application ID7sgpv7XOdG0J/8IU8XtLQQ==
Document DescriptionUser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize63.15kB (789327 bits)
Date Submitted2011-10-05 00:00:00
Date Available2011-10-05 00:00:00
Creation Date2011-09-28 16:15:36
Producing SoftwareMicrosoft® Word 2010
Document Lastmod2011-09-28 16:18:40
Document TitleUser manual
Document CreatorMicrosoft® Word 2010
Document Author: Chris Giordano

QUICK START INSTALLATION GUIDE
Help Auto Page protect our environment !
If you are not proficient in the installation of this product or would
like a full version of the installation manual, Please visit our web
site @ www.autopageusa.com
FOR PROFESSIONAL INSTALLATION ONLY!
C3-RS-601
FEATURE “III” PROGRAMMING:
H5 5 PIN WIRE HARNESS
1. Turn the Ignition 'switch „ON/OFF‟ 3 TIMES and stay in OFF position.
rd
2. Push the Valet switch 3 times (holding in on the 3 push) until one chirp with one long
chirp is heard, then release the valet switch. You are now in the Alarm feature “A”
programming mode.
3. Press and release the transmitter button corresponding to the feature you want to
program.
Red/White: Parking Light Relay Power Input
RX-300A
Violet : Starter Output
White: Parking Light Relay Output
FUSE
Valet
Switch
Red : 12 Volt Input
FUSE
Black: System Main Ground (-)
Red : 12 Volt Input
Yellow. Ignition 1 Output
Press
Transmitter
Button
Brown: Siren (+) Output
Pink : Ignition 2 Output
Red: 12v + Battery Power
Brown ACC Output
LED Indicator
H5 H4
ANT. Valet
C3-RS-601
FEATURE PROGRAMM
H6 DL
H3 10 Pin White
1. Turn the Ignition 'switch „ON/OFF‟ 3 TIMES and stay in OFF position.
2. Push the Valet switch 1 times (holding in on the 1st push) until one chirp with one
long chirp is heard, then release the valet switch. You are now in the Alarm feature
“A” programming mode.
3. Press and release the transmitter button corresponding to the feature you want to
program.
H8 H2 5 Pin
Red/White : Parking light Input
Door Locks
White : Parking light Output
Blue : (-) Unlock
(+) Lock
FUSE
Black : System Ground
Brown : Programmable Output (-)
Horn (-) or Factory Rearm (-)
Red : System Power + 12 Volt
White/Red : Tachometer Signal Input
Yellow : Ignition 3 Output ( 200 mA - )
White/Blue : Instant Start (-) Input
Blue/Black : ACC 2 ( 200 mA - )
Press
Transmitter
Button
One Chirp /
LED one pulse
Factory Default
Setting
1.
H3/2 White/Blue
= 1 Pulse
Remote Start
H3/2 White/Blue = 3
Pulse Remote Start
H3/8 Pink Wire =
Factory Security
Disarm Signal
Output
H3/8 Pink Wire =
Start Status (Shock
Sensor Bypass
Control) Output
H2/4 Brown Wire
= Horn Output
H2/4 Brown Wire =
Rearm Signal Output
2.
Two Chirps /
LED two pulse
Three Chirps/
LED three pulse
Black/White : Neutral Safety Switch (-) Input
White : Ground When Running By-pass Control Output
White/Violet : Safety Shutdown Brake Input (+)
Gray : CH 3 Trunk Release (-)
20A
20A
Red: Remote Start Power 1
Red: Remote Start Power 2
Violet: Starter (+) Output
Pink: Ignition 2 (+) Output
20 minutes
run time
10 minutes run
time
30 minutes run
time
5 minutes run
time
2.
0.8-second
Door lock &
Unlock.
3.5-second
Door
Lock & Unlock.
0.8 second
lock, 0.35
second unlock
0.8 second dbl
lock,0.8 second
dbl unlock
3.
1.
Button Two
Push Remote
2.
Without ignition
controlled door
locks & unlocks
Yellow: Ignition 1 (+) Output
Brown: Acc/Heater (+) Output
3.
Gasoline Engine
Door Lock
before start
Door Lock after
start
Door Lock
before & after
start * This is the
preferred setting
when using the
optional XT-11
single button
remote
Without this
feature
FEATURE “IV” PROGRAMMING:
1. Turn the Ignition 'switch „ON/OFF‟ 3 TIMES and stay in OFF position.
2. Push the Valet switch 4 times (holding in on the 4th push) until one chirp with one long
chirp is heard, then release the valet switch. You are now in the Alarm feature “A”
programming mode.
3. Press and release the transmitter button corresponding to the feature you want to
program.
Press
Transmitter
Button
One Chirp /
LED one
pulse
Factory
Default
Setting
Tachometer
checking type.
Two Chirps /
LED two pulse
Voltage checking
type
Three Chirps /
LED three pulse
Four Chirps
/ LED four
pulse
Timer checking
type
DBI TACH
**
DATA
ONLY !!
RPM learning
3.
Start Timer:
0.6-second
0.8-second (2 chirps), 1.0-second (3 chirps), 1.2-second (4
chirps), 1.4-second (5 chirps), 1.6-second (6 chirps), 1.8second (7 chirps), 2.0-second (8 chirps), 3.0-second (9
chirps), 4.0-second (10 chirps),
Low ceck
level
Hi check level
Exit: Turn Ignition to 'ON' position, or leave it for 15 seconds. 3 long chirps & 3 parking light flashes will
confirm exit.
FEATURE “V” PROGRAMMING:
1. Turn the Ignition 'switch „ON/OFF‟ 3 TIMES and stay in OFF position.
2. Push the Valet switch 2 times (holding in on the 2nd push) until one chirp with one
long chirp is heard, then release the valet switch. You are now in the Alarm feature
“A” programming mode.
3. Press and release the transmitter button corresponding to the feature you want to
program.
One Chirp /
LED one pulse
Factory Default
Setting
3.
2.
FEATURE “II” PROGRAMMING:
Press
Transmitter
Button
Five chirps= 0.8 second lock, dbl 0.8 second unlock
Six chirps= dbl 0.8 second lock, 0.8 second unlock
1.
Exit: Turn Ignition to 'ON' position, or leave it for 15 seconds. 3 long chirps & 3 parking
light flashes will confirm exit.
H1 6 PIN HEAVY GAUGE WIRE HARNESS
Four Chirps /
LED four pulse
1.
H3/8 Pink Wire = 20
Second Ground out
Key Sensor By-pass
Pink : 200mA Programmable Output (-)
White/Black : Safety, Hood Pin Input (-)
Three Chirps /
LED three pulse
Exit: Turn Ignition to 'OFF' position, or leave it for 15 seconds. 3 long chirps & 3 parking
light flashes will confirm exit.
FEATURE “I” PROGRAMMING:
Green : (-) Lock
(+) Unlock
Two Chirps /
LED two pulse
PROGRAMMING TRANSMITTER
Note: This model will only retain the last 4 remote transmitters programmed. If the
transmitter memory is exceeded, the security system will start deleting transmitters from
memory in chronological order.
1. Turn the Ignition 'switch „OFF/ON‟ 3 TIMES and stay in ON position.
“Within 15 seconds”.
2. Push the Valet switch 2 times and hold it on the 2nd push until a long chirp is heard
then release the valet switch. You are now in the Transmitter programming mode.
3. Press and hold any button of the transmitter until the siren responds with a confirming
chirp, indicating the signal has been stored into memory.
4. If you have additional transmitters (up to 4) that need to be programmed, repeat step 3
for remaining transmitters.
H7
LED
H1 6 Pin Wht.
One Chirp /
LED one
pulse
Factory
Default
Setting
Two Chirps /
LED two pulse
Three Chirps /
LED three pulse
Four Chirps /
LED four pulse
Button
One push
Remote Start
Ignition
controlled
door locks &
unlocks
Diesel Engine
and 10 seconds
warn-up timer
1. Turn the Ignition 'switch „ON/OFF‟ 3 TIMES and stay in OFF position.
2. Push the Valet switch 5 times (holding in on the 5th push) until one chirp with one long
chirp is heard, then release the valet switch. You are now in the Alarm feature “A”
programming mode.
3. Press and release the transmitter button corresponding to the feature you want to
program.
Press
Transmitter
Button
1.
2.
Diesel Engine
and 15 seconds
warn-up timer
Diesel Engine
and 20
seconds warnup timer
Exit: Turn Ignition to 'ON' position, or leave it for 15 seconds. 3 long chirps & 3 parking
light flashes will confirm exit.
3.
One Chirp /
LED one pulse
Factory
Default Setting
Second
Accessory
H3/9 Blue/Black
Two Chirps /
LED two pulse
Three Chirps /
LED three pulse
Four
Chirps /
LED four
pulse
FEATURE “V” MUST BE PROGRAMMED FOR THE
UNIT TO RESPOND TO REMOTE START!
If you are not sure or do not understand any part of
the quick start guide, please download the complete
installation
manual
available
at
www.autopageusa.com . This quick start guide is a
brief outline for professional installers that are
familiar with the installation and operation of this
remote start system.
Please test all of your
installation to insure proper operation of the vehicle
before returning it to the customer.
For authorized dealer technical support, please call
800-945-2527 and wait for the first available
technician. Technical support hours are Monday
through Saturday from 8:00 to 5:00 Pacific standard
time.
This Remote Starter with Alarm and Keyless Entry System
has been designed to be installed on fuel-injected vehicles
with an automatic transmission ONLY.
Never install this remote starter on a manual
transmission vehicle.
This system must be installed and wired through a
safety switch so it will not start in any forward or reverse
gear.
Some automatic transmission vehicles mainly older GM
vehicles with a purple starter wire have a mechanical-type
park safety switch instead of electrical safety switch. The
mechanical type does not interrupt the starter circuit when
the transmission is in any gear and does not offer the 100%
level of safety required for remote starting purposes.
Therefore, our system should never be installed on any
vehicle that uses a mechanical type park safety switch.
Once you install this system, you must verify that the
vehicle will not start in any forward or reverse gear,
regardless of the type of vehicle.
Read the operation manual for operating.
Do not install any component near the brake, gas pedal
or steering linkage.
Some vehicles have a factory installed transponder
immobilizer system that can severely complicate the
installation. There is a possibility that this system cannot be
installed on some immobilizer-equipped vehicles.
Most vehicles have an SRS air bag system. Use
extreme care and do not probe any wires of the SRS
system.
Disconnect the car battery before beginning work on the
vehicle.
Check behind panels before drilling any holes. Ensure
that no wiring harness or other components are located
behind the panels that would otherwise be damaged.
Do not use conventional crimp lock, bullet on any wiring.
Poor wiring, i.e. taped joints will possibly introduce
unreliability into the alarm system and may result in false
alarms or incorrect operation. We suggest soldering all
connection points.
Install the wiring neatly under carpets or behind trim to
prevent possible damage to wires.
Second Start
H3/9 Blue/Black
+ 50 RPM
DBI ONLY
No RPM learning
- 50 RPM
DBI ONLY
No RPM Learning or < 50RPM
Exit: Turn Ignition to 'ON' position, or leave it for 15 seconds. 3 long chirps & 3 parking light flashes will
confirm exit.
960 Knox Street Unit B
Torrance, California 90502
Main Office: 310-323-1800
Technical Support: 800-945-2527
(For Authorized Dealers Only)
www.autopageusa.com
Quick Start
OPERATIONS MANUAL
Please register your product at www.autopageusa.com
If you are not sure or do not understand any part of the quick start
guide, please download the complete installation manual available at
www.autopageusa.com .
1. Press button on the transmitter.
2. The horn will chirp twice and parking light will flash twice
to indicating that the keyless system is now unlocked.
The vehicle doors will unlock and dome lights will turn on
for 30 seconds.
TRUNK RELEASE (Additional Installation Required)
Press and hold the
button on transmitter for two
seconds to remote control the trunk release or other electric
devices.
TRANSMITTER OPERATION
XT-12
Transmit
ter
Button
ACTIVATE UNLOCK:
System Function
Remark
Unlock Doors
Activate The Remote
Start
Stop remote start
operation **
Push twice to start
Trunk Release
Push and hold for 3
seconds
Push Twice to stop
engine
REMOTE CONTROL TRANSMITTER: XT-12
DEACTIVATING WITHOUT A TRANSMITTER
The Override function may be used if the remote transmitter is
lost or inoperative.
1. Enter the vehicle and turn the ignition switch to „ON‟
position.
2. Within 10 seconds push and release the valet switch
VALET MODE:
The valet switch allows you to temporarily bypass all system
function, eliminating the need to hand your transmitter to
parking attendants or garage mechanics. When the system
is in valet mode, and remote start functions are bypassed,
Enter Valet Mode:
1. From the Unlock condition, turn the ignition to “ON”
position.
2. Push and hold valet switch for 2 seconds until the LED
turns on. The LED will remain on as long as the system
is in „valet mode‟.
Exit Valet Mode:
1. Return to normal operation, turn ignition „on‟.
2. Push and hold valet switch for 2 seconds, The LED will
turn off indicating the system has exited the valet mode.
IGNITION CONTROL DOOR LOCKS.
If the vehicle‟s door locks have been interfaced to the
security system, the system will automatically lock the
vehicle‟s doors when the ignition is turned “ON” and /or
unlock the vehicle‟s doors when the ignition is turned “OFF”.
REMOTE START OPERATION:
WARNINGS:
As with any product that performs automatic functions, there
are certain safety precautions that you must practice and be
aware of.
1. Keep the transmitter out of children‟s reach.
2. Do not leave anyone in the vehicle while running on remote
control.
CHANGING THE BATTERY IN YOUR TRANSMITTERS
3.
Alert servicing personnel that the vehicle can be started
XT-12: The XT-12 transmitter uses two (2) 3-volt lithium ion
automatically.
batteries (#CR2016) To replace the battery, you will need to
use a small flat blade screwdriver. Locate the small notch on 4. Do not start the vehicle by remote while it‟s in an enclosed
area or
the lower right side of the transmitter case next to the key ring.
garage.
Using the flat blade screwdriver, carefully pry the top case from
the bottom case. It should snap apart after breaking the seal. 5. Always apply the parking brake and lock the vehicle as you
exit the vehicle.
Place the new batteries in exactly the same manner,
6. Should the unit malfunction, disconnect the fuse until the
This device complies with part 15 of the FCC rules. Operation is
problem is corrected.
subject to the following two conditions.
7. The use and operations of this system is the sole
(1)This device may not cause harmful interference, and
responsibility of the operator.
(2)This device must accept any interference received, including
8.
Some
areas may have local ordinances that prohibit
interference that may cause undesired operation.
leaving a vehicle
running on public streets.
Per FCC 15.21, you are cautioned that changes or modifications not
expressly approved by the part responsible for compliance could void
the user’s authority to operate the equipment.
TO REMOTE START THE VEHICLE:
When you want to start your vehicle,
1. Press
button TWICE on either remote transmitter.
2. The parking lights will flash to indicate the remote start
received the signal.
3. The engine will start in approximately 5 seconds.
4. Once the engine is running, after a couple of seconds the
parking light will turn on again and climate controls will
activate and adjust the vehicles interior temperature to your
preset setting.
5. The vehicle will run for 5 to 30 minute cycle and automatically
shut down.
The duration of the starting mode is
programmable.
NOTE: The Remote Start Unit will not start the vehicle if any one
of the following conditions exists:
1. The hood is opened.
2. The brake pedal is pressed.
3. The optional remote start enable toggle switch is moved to the
OFF position.
(If installed)
4. The gear selector is in any gear other then “PARK” or
“NEUTRAL”
TO TURN OFF THE REMOTE START:
When the engine is running (by remote start), if you want to stop it,
WARNINGS:
As with any product that performs automatic functions, there are
certain safety precautions that you must practice and be aware of.
1. Keep the transmitter out of children‟s reach.
2. Do not leave anyone in the vehicle while running on remote
control.
3. Alert servicing personnel that the vehicle can be started
automatically.
4. Do not start the vehicle by remote while it‟s in an enclosed
area or garage.
5. Always apply the parking brake and lock the vehicle as you
exit the vehicle.
6. The vehicle windows must be rolled up.
7. Should the unit malfunction, disconnect the fuse until the
problem is corrected.
8. The use and operations of this system is the sole
responsibility of the operator.
9. Some areas may have local ordinances that prohibit leaving
a vehicle running on public streets.
10.It is not safe to remote start the vehicle if the vehicle is
parked on a steep incline.
LIMITED LIFETIME WARRANTY PROVISIONS
( U.S. ,Continental U.S. and Canada Only)
1. Press
button twice on the transmitter.
2. Move the optional remote start enable toggle switch to OFF
position. (If installed)
3. Press the brake pedal, the vehicle will shut down and turn off
the parking light to indicate engine stopped.
TO OVERRIDE VEHICLE FROM REMOTE START CONTROL:
To operate the vehicle while running from a remote start condition.
1. Insert the ignition key and turn it to the “ON” (not the start)
position.
2. Press the brake pedal.
Note: If the brake pedal is pressed before the key is in the ON
position, the engine will shut down.
Auto Page, Inc. WARRANTS that this new unit has been thoroughly inspected and tested at the
factory prior to delivery. Your Auto Page equipment is guaranteed for “life” to the original
purchaser/user of the equipment and the original vehicle in which it was installed by an authorized
installer under the following conditions: If the product proves defective (according to Auto Page's
testing) within the first year, the defective unit may be exchanged or repaired free of charge.
“Proof of Purchase” (dated sales receipt) must accompany all warranty returns; otherwise, your
return will be rejected and sent back. After one (1) year, the purchaser should ship the unit
prepaid to Auto Page with a money order in the amount of $30.00 to cover shipping and handling
charges.
Note: The product needs to be registered online at time of installation.
www.autopageusa.com
TEMPORARY STOP FEATURE:
This feature allows the vehicle to remain running after the key has
been removed from the ignition. This feature is useful for
occasions when you wish to exit and lock the vehicle for short
periods of time, but would like to leave the engine running and the
climate control on.
This WARRANTY will be considered void if the equipment has been misused, neglected,
improperly serviced or installed, altered, dropped or damaged by water, contrary to the Auto Page
OPERATIONS MANUAL. Or, if used with accessories not approved by Auto Page, which may
have contributed to the defect. See note below regarding product installation**.
1. Before turning off the engine, press the
button twice on
the transmitter. The parking lights will come on and the LED will
flash 3 times to confirm Temporary Stop feature „ON‟
2. Turn the ignition key to OFF position. (The engine will stay
running.)
3. The engine will run until the pre-programmed time elapsed or
shutdown input is received.
SHUTDOWN INPUT FOR REMOTE STARTER:
If any of the following conditions exist while the system is
operating, the engine will not start or will shut down immediately:
1. The hood is opened.
2. The brake pedal is pressed.
3. The optional remote start enable toggle switch is moved to the
OFF position. (If installed)
4. Engine is over-revved. {“Tachometer checking type” only}
5. The pre-programmed run time (5 /10 / 20 / 30 minutes) has
elapsed.
6. Transmitter
button is pressed Twice.
7. The vehicle refused to start running after {3} unsuccessful
attempts.
Exclusion to the Limited Lifetime Warranty Provision: All two-way LCD and two-way OLED remote
transceivers are excluded from the Limited Lifetime Warranty noted in paragraph no.1. All twoway LCD and two-way OLED remote transceivers are guaranteed to the original purchaser for a
period of one year from date of purchase. If the product proves to be defective within the first
year, the defective unit may be exchanged or repaired free of charge. All other provisions stated
on this card apply.
The purchaser‟s remedies under this WARRANTY shall be limited to the repair or replacement of
electronic components only. THE FOLLOWING IS NOT COVERED: Damages or deterioration to
cases, batteries, covers and cabinets; the cost of repairs, replacement and labor of which shall be
borne by the purchaser even if occurring during the WARRANTY period.
Any equipment or parts which are claimed to be defective under this WARRANTY must be sent to
the Auto Page Service center with “proof of purchase” at the purchaser‟s expense prior to such
return, a Return Authorization Number should be obtained. Auto Page will return the equipment,
charges prepaid. Warranty Service can be provided through the dealer where the equipment is
originally purchased.
Any unexpired WARRANTY shall be applicable to equipment and parts in the possession of the
original purchaser only.
THIS WARRANTY IS IN LIEU OF ANY AND ALL OTHER WARRANTIES, EXPRESSED OR
IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE.
Auto Page shall not be liable, under the foregoing WARRANTIES or otherwise, for: Any personal
injury of any kind to the purchaser, its employees or agents or anyone else whomsoever resulting
directly or indirectly from the use or presence of the equipment or parts; Consequential damages
of any kind; any inability of the purchaser to use the equipment.
**IMPORTANT NOTE: Any damages to the Auto Page system resulting from an installation
performed by anyone other than a professional installation technician authorized by a
dealer of Auto Page will void the product‟s Limited Lifetime Warranty.
960 Knox Street Unit B
Torrance, California 90502
310-323-1800
www.autopageusa.com

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Modify Date                     : 2011:09:28 16:18:40+08:00
Create Date                     : 2011:09:28 16:15:36+08:00
Creator                         : Microsoft® Word 2010
Author                          : Chris Giordano
Producer                        : Microsoft® Word 2010
Page Count                      : 2
About                           : uuid:76ece043-f7f1-464e-8766-e75ec117aa2d
Mod Date                        : 2011:09:28 16:18:40+08:00
Creation Date                   : 2011:09:28 16:15:36+08:00
Metadata Date                   : 2011:09:28 16:18:40+08:00
Document ID                     : uuid:1e7a9010-92f1-418b-9075-64a049293fdf
Format                          : application/pdf
Tagged PDF                      : Yes
Has XFA                         : No
EXIF Metadata provided by EXIF.tools
FCC ID Filing: H5OT52

Navigation menu