Advance Security TR67 IUV914F9A User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3454077
Application ID	GGRrJvd2SAwC4ZIhxkrMXw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	46.7kB (583810 bits)
Date Submitted	2017-07-06 00:00:00
Date Available	2017-07-06 00:00:00
Creation Date	2017-06-21 11:59:05
Producing Software	Adobe PDF Library 10.0.1
Document Lastmod	2017-06-22 17:26:32
Document Title	Users Manual
Document Creator	Adobe InDesign CS6 (Windows)

PROFESSIONAL
SERIES
Owner’s Guide
For Model:
CA SECRS
Deluxe Vehicle Security and
Remote Start System
IMPORTANT NOTE: The operation of the Security and Convenience System as described in this manual is
applicable to most vehicles. However, due to the configuration of some vehicles, some functions AND/OR
SAFETY PRECAUTIONS may not apply. Please see your installing dealer for more information.
2017 Voxx Electronics Corporation. All rights reserved.
Table of Contents
Using Your Remote Control..................................................................... 3
Arming the Security System............................................................... 3
Passive Arming Bypass...................................................................... 3
Bypassing the Shock Sensor............................................................. 3
Hidden Alarm Function....................................................................... 3
Disarming the Security System.......................................................... 3
Two Stage Door Unlock (optional)...................................................... 4
		 Activating Trunk Release (optional).................................................... 4
Activating AUX 1 (optional)................................................................. 4
Entering AUX Mode and Activating Additional AUX Outputs.............. 4
Using the Progressive Car Finder Feature......................................... 5
Using the Personal Protection Alarm.................................................. 5
Programmed Transmitter Notification................................................. 5
Valet Mode......................................................................................... 5
Eliminating Arm / Disarm Notification Chirps...................................... 5
User Selectable LED.......................................................................... 6
Manually Overriding the Security System.......................................... 6
Car Jack Mode................................................................................... 6
Using Your Remote Vehicle Starter........................................................ 7
Remote Start Ready Mode................................................................. 7
Cancelling Remote Start Ready Mode............................................... 7
Remote Starting Your Vehicle............................................................. 8
Remote Start Shutdown..................................................................... 8
Entering Your Vehicle while it is Running via Remote Start............... 8
Enter & Exiting the Vehicle - Remote Start Ready Mode................... 8
Using the “Quick-Stop” Feature.......................................................... 9
Preheating or Precooling the Vehicle’s Interior................................ 10
User Programmable Run Time / Run Time Extension...................... 10
Turbo Timer Mode (optional)............................................................ 10
		 Operating the 2 / 3 Hour Start Up Timer Mode................................. 11
Operating the Daily Start Timer........................................................ 12
Temperature Start Mode................................................................... 12
Remote Start Safety Features.......................................................... 12
Status LED, Light Flashes and Siren/Horn Indications...................... 13
Optional 2-Way LED Remote Control................................................... 14
Optional 2-Way LCD Remote Control................................................... 15
LCD Remote Control ICON’s................................................................. 17
Remote Control Buttons & Functions.................................................. 18
Replacing Remote Control Batteries.................................................... 20
Warranty Information............................................................................. 21
caSECRS Owners revA
Using Your Remote Control
Arming the Security System
To arm the system, exit the vehicle, close all doors, then press the
button. The
parking lights will flash 2 times, indicating the system is armed, has locked the doors
(if equipped and connected) and activated the starter disable feature. The LED status
indicator will blink steadily, once per second.
NOTE: The system is equipped with a feature called Silent Choice. If enabled, the
system requires a second press of the
button to activate an audible arming
response from the vehicle.
Passive Arming Bypass
If passive arming is enabled on your system, while the system is disarmed, press
, the system will respond with 1 chirp and the LED will turn on. The security
system will remain in this temporally bypassed state for as long as you wish. To exit
passive bypass, press the
or
button and the system will return to normal status.
Bypassing The Shock Sensor
To arm the system and ignore the shock sensor press
button, then within 5
seconds press
, the system will respond with 1 long chirp.
NOTE: The system will only change the shock sensor setting for one arm cycle and
will be defaulted back to normal operation the next time the system is armed.
Hidden Alarm Function
Press the
button first, within 3 seconds press the
button to activate the hidden
alarm function. The security system will arm with “Hidden Alarm Function” in which the
siren / horn will be silenced if the system is triggered.
Disarming the Security System
To disarm the system press the
button. The parking lights will flash 1 time,
indicating the system is disarmed and has unlocked the doors (if equipped and
connected).
NOTE: The system is equipped with a feature called Silent Choice. If enabled, the
system requires a second press of the
button to activate an audible disarming
response from the vehicle. If your system is set up for 2 step unlock, a third press of
unlock will activate the audible response.
*Throughout this manual, ‘press’ refers to pressing for less than 1 second; ‘press and hold’ refers to pressing for more
than 2 seconds.
2017 Voxx Electronics Corporation. All rights reserved.
Two Stage Door Unlock (Optional)
If this feature is enabled on your system, pressing the
button one time will unlock
only the driver’s door. Press
again within three seconds to unlock the remaining
doors.
Activating the Trunk Release Feature (Optional)
If this feature is enabled on your system, pressing and holding the
seconds will open the vehicle’s trunk or hatch.
button for 3
Activating the AUX 1 Output (Optional)
If this feature is enabled on your system, pressing the
and
buttons
simultaneously will activate an optional feature. This feature can be programmed for a
wide range of functions like power window or sunroof automation, please consult your
installing dealer to determine the functionality of your system.
Entering AUX Mode and Activating the Additional AUX 2 - 5 Outputs (Optional)
To access the additional AUX outputs, AUX 2, AUX 3, AUX 4, and AUX 5, you must
first enter the transmitters AUX Mode. This will “shift” the functions of the transmitter
buttons from their standard operation to control of the AUX outputs.
AUX Mode - 4 button transmitter: Press and Hold
and
for 2
seconds, the transmitter LED will flash 1 time. AUX Mode will remain active
for 15 seconds. AUX Mode will exit after 15 seconds of inactivity or by 		
pressing
and
again for 2 seconds, the transmitter LED will flash 2
times to confirm exit.
AUX Mode - LCD 5 Button transmitter: Press and Hold
for 2 seconds, the
transmitter LCD screen will display “AU”. AUX Mode will remain active 		
for 15 seconds. AUX Mode will exit after 15 seconds of inactivity or by 		
pressing
again for 2 seconds.
Activating outputs while in AUX Mode:
AUX 2: Press and Hold
for 3 seconds.
AUX 3: Press and Hold
for 3 seconds.
AUX 4: Press and Hold
for 3 seconds.
AUX 5: Press and Hold
for 3 seconds.
caSECRS Owners revA
Using the Progressive Car Finder Feature
Press the
button to locate your vehicle. The system will flash the parking lights
and sound 5 times at low volume, increasing in volume each time the button is
pressed.
Using the Personal Protection Alarm (Panic)
Press and hold the
button for 3 seconds to activate the personal protection alarm.
During panic mode, the normal function of the transmitter buttons will be suspended.
The transmitter’s
and
buttons can be used to lock and unlock the door (if the
option is installed). To stop the alarm, press and hold the
button on the transmitter
again for 3 seconds. The system will automatically stop after 30 seconds.
Programmed Transmitter Notification
As a security precaution each time the vehicle’s ignition is turn on the status LED
light with flash the number of transmitters programmed into the system. This helps
to identify unauthorized transmitters from accessing your vehicle. If you believe an
unauthorized transmitter has been programmed to your system, contact your installing
dealer for assistance.
Valet Mode
When valet mode is activated the status LED will light solid, and all security and
remote start functions will be disabled. To enter or exit valet mode simply follow the
steps outlined below:
1.
Turn the vehicle’s ignition ON.
2.
Push and hold the programming/valet button.
3.
The LED will turn on solid when valet mode is active
4.
Release the programming/valet button.
Eliminating Arm / Disarm Notification Chirps
System ARM/DISARM chirps can be toggled ON or OFF without entering the
programming feature banks.
1.
2.
Turn the ignition ON then OFF.
Press and release the valet/programming button 3 times. The system
will respond with 1 chirp for ON or 2 chirps for OFF.
2017 Voxx Electronics Corporation. All rights reserved.
User Selectable LED
This feature will control whether the LED is ON or OFF when the system is Armed/
Locked and can be toggled ON or OFF without entering the programming feature
banks.
1.
2.
Turn the ignition ON, OFF, ON, OFF.
Press and release the valet/programming button 3 times. The system
will respond with 1 chirp for ON or 2 chirps for OFF.
Manually Overriding the Security System
Your system can be disarmed without the use of the transmitter. This is necessary,
since you will need the ability to operate your vehicle if the transmitter is lost or its
battery fails. To by-pass the alarm system;
1.
Open the vehicle door. The alarm will sound.
2.
Turn the ignition key to the ON position.
3.
Within 10 seconds, press and release the valet push button switch.
The alarm system will stop sounding and enter the (by-passed) mode. You can now
start and operate the vehicle normally.
Carjack Mode (Anti-Hijack Mode)
This feature must be turned on in system programming, please consult your installing
dealer.
Triggering Carjack mode: While the ignition is ON and press and hold
for 2
seconds, the parking lights will flash 1 time and the system will act as follows;
1.
50 seconds after being triggered the siren will chirp for 15 seconds,
during this 15 seconds you will be alerted to push the valet button to
turn off Carjack mode. If Carjack mode is not turned off at this time it
will advance to the next step.
2.
Following the 15 second chirps (total time now 65 seconds) the siren
will go into full sound and the parking lights will start flashing.
3.
90 seconds after trigger in, addition to the siren and parking lights, the
system will activate the starter kill. THE SYSTEM WILL REMAIN IN THIS
STATE UNTIL THE BATTERY IS DEPLETED.
OVERRIDE THE SYSTEM TO TURN OFF CARJACK MODE: Turn the ignition OFF
then On and press the valet button within 10 seconds.
caSECRS Owners revA
Using Your Remote Starter
Remote Start Ready Mode must be enabled if your vehicle is equipped with a
manual transmission.
Remote Start Ready Mode - Manual Transmission Vehicles Only
To activate the remote start function, the system must first be in Remote Start Ready
Mode. Follow the steps below to enter remote start ready mode.
1.
While the engine is running by the ignition key;
a.
Place the transmission in neutral.
b.
Set the parking brake
2.
With your foot off the brake pedal, press and release the
button to
activate the remote start. The LED will flash 3 times and the parking
lights will turn on to confirm the system has remote started.
3.
Remove the keys from the ignition, the vehicle will remain running.
4.
Exit the vehicle and close all vehicle doors.
5.
Within 1 minute of step 1, press the
button to lock the vehicle’s
doors. The vehicle will shutdown and sound 2 short chirps then 1 long
chirp to confirm ready mode is set.
Cancelling Remote Start Ready Mode - Manual Transmission Vehicles Only
The system will exit remote start ready mode if any of the following occur:
Open any door
Open the hood or trunk (if connected)
Press the brake
Release the parking brake
Turn the ignition ON
2017 Voxx Electronics Corporation. All rights reserved.
Remote Starting Your Vehicle
To activate the remote start function, press and release the
button 2 times within 2
seconds. The system will sound, the parking lights will flash 1 time and the system
will check the vehicle to ensure it is safe to start. If all safety parameters are correct,
the vehicle will start. The vehicle’s parking lights will turn on (or flash depending on
system settings) as a visual indication that the vehicle has started and is running.
If your vehicle stalls or does not start, the system will pause 5 seconds, then try
3 more times to start the vehicle (a total of 4 attempts). The system will pause 5
seconds between each start attempt.
Remote Start Shutdown
Press and hold the
button for 3 seconds to turn the vehicle off.
Entering the Vehicle while it is Running via Remote Vehicle Start
1.
Unlock the vehicle’s doors.
2.
Enter the vehicle. DO NOT PRESS THE BRAKE PEDAL!
3.
Insert the key into the ignition switch and turn to the ON or RUN 		
		position.
4.
Press the brake pedal. The remote vehicle starter will disengage and
the vehicle will operate normally.
To Enter & Exit the Vehicle while (Manual Transmission) Remote Start Ready
Mode is already active without cancelling Remote Start Ready Mode.
If you want to make a short stop and keep your vehicle running (to keep the interior
warm or cool), the quick-stop feature allows you to do this while keeping your vehicle
secure and your keys with you.
1.
With Ready Mode already previously set, activate the remote start.
2.
While under control of the remote start open vehicle door to retrieve
		items.
3.
4.
Exit the vehicle and close all doors.
Press the
button, the unit waits 3 seconds and then shuts down,
the system will verify all doors have been closed then will emit the 2
short/1 long tone and light flash pattern indicating Manual Transmission
Ready Mode is active.
Note: If the 2 short/1 long tone is not heard then Ready Mode has not been
set.
caSECRS Owners revA
Using the “Quick-stop” Feature
If you want to make a short stop and keep your vehicle running (to keep the interior
warm or cool), the quick-stop feature allows you to do this while keeping your vehicle
secure and your keys with you.
To engage Quick Stop:
1.
Stop the vehicle and place the transmission in PARK.
2.
With your foot off the brake pedal, press and release the
button 2
times within 2 seconds. The LED will flash 3 times to confirm quick
stop is entered.
3.
Remove the keys from the ignition and exit the vehicle. Press the
button to lock the vehicle’s doors if desired.
To engage Quick Stop - Manual Transmission Vehicles:
1.
With the vehicle running, foot off the brake, parking brake set ON.
2.
Press and release the
3.
Exit the vehicle close all doors (Door Open/All Doors Close)
4.
Press and release the
5.
Within 3 seconds press the
button to activate remote start.
button.
button:
The unit enters Quick Stop Mode and will remain running 		
until remote start time-out and then shut down. (Remote Start Ready
Mode is NOT active)
Note: Do not leave children or animals unattended in the vehicle when using the
quick-stop feature.
2017 Voxx Electronics Corporation. All rights reserved.
Preheating or Precooling the Vehicle’s interior
Before exiting the vehicle, set the temperature controls to the desired setting and
operation. After the system starts the vehicle, the heater or air conditioner will
activate and heat or cool the vehicle’s interior to your setting.
User Programmable Run Time / Run Time Extension
The system has the ability to allow the user to extend the time the vehicle will be
running under control of the remote start. This will only extend the run time back to
the current run time setting during the current remote start cycle. If your system is
set to run 15 minutes and the time remaining is 4 minutes, extending the run time
will reset the countdown timer to 15 minutes and your vehicle will continue to run for
another 15 minutes. Follow the steps below to extend the vehicle’s run time.
1.
The remote start must already be active.
2.
Press and release the
3.
button 4 times.
The system will chirp 1 time and flash the parking lights 4 times to
confirm that the run time has been reset.
Turbo Timer
This option will keep the engine running to allow the vehicle’s turbo to properly cool
down before shutting the engine off.
To engage the Turbo Timer feature:
1.
With the vehicle running via the ignition key and your foot off of the
brake pedal.				
2.
Engage the vehicle’s parking brake and press the
buttons simultaneously.		
3.
The vehicle’s parking lights will turn on to verify the Turbo Timer 		
feature has been activated.			
4.
Turn the ignition key OFF, the vehicle will continue to run until the preprogrammed time has elapsed (1, 3, or 5 minutes)
10
and
To disengage the turbo timer feature, press the vehicle’s brake pedal.
caSECRS Owners revA
Operating the 2 / 3 Hour Start Up Timer Mode
The system has the ability to start the vehicle every 2 or 3 hours for a 48 hour period.
This feature is especially useful in cold climates where the only means to keep the
engine and engine fluids warm is to periodically start the engine. The default setting
is 3 hour, Selection between 2 or 3 hour is made in option programming.
WARNING!
Be certain that the vehicle is outdoors before using this or any remote starting
device. A running engine produces dangerous carbon monoxide fumes which can be
harmful or fatal if prolonged exposure occurs. DO NOT remote start the vehicle if it is
garaged.
To begin the 2 / 3 hour start up timer mode:
1.
Turn the vehicle’s ignition ON then OFF.
2.
Press and hold the valet button.
3.
Press the
button 4 times, the system will;
a.
When set for 3 Hour (default) - chirp 2 times and flash the
parking lights 4 times.
b.
When set for 2 Hour - chirp 1 time and flash the parking
lights 2 times.
4.
Release the valet button.
To exit the 2 / 3 hour start up timer mode:
1.
Turn the vehicle’s Ignition ON.
OR
Activate the remote vehicle start feature using the remote control.
2.
2017 Voxx Electronics Corporation. All rights reserved.
11
Operating the Daily Start Timer
The system has the ability to start your vehicle based on a 24-hour countdown timer.
This feature requires a two-part activation sequence. From the remote, while in range
of the vehicle, pressing both the
buttons together will activate the 24 hour
countdown timer (the vehicle will start 24 hours from this time). Next, When you are
finished operating the vehicle for the day, perform the following steps to complete the
process.
1.
Turn the ignition ON/OFF (vehicle must be disarmed).
2.
Within 10 seconds, while pressing the brake, press and release the
button twice.
The vehicle will emit 2 chirps and flash the parking lights 4 times.
3.
Temperature Start Mode
The system has the ability to start the vehicle if the temperature drops below a preset
temperature threshold. Once activated, the system will only start the vehicle one time
based on the temperature setting and will be cancelled if the vehicle is started with the
key or remote started by the transmitter. Temperature is read from the module, located
below the dashboard in most instances, and the vehicle’s interior temperature may
vary from the ambient temperature.
1.
The vehicle must be armed.
2.
Press and release both the
3.
The vehicle will emit 1 chirp and flash the parking lights 1 time.
buttons together.
Note: This feature is defaulted OFF and must be set in option programming.
Remote Start Safety Features
For safety and security reasons, the system will shutdown or prevent the remote
vehicle starter from activating if any of the following occur:
1.
The vehicle’s hood is open.
2.
The brake pedal is pressed prior to turning the ignition key to the ON
		position.
3.
The engine is over-revved (tach checking only).
4.
Valet Mode is active. Refer to the Valet Mode section of this manual on
page 5.
Remote Start Ready Mode is not set. Manual transmission vehicle’s only.
12
5.
caSECRS Owners revA
Status LED, Light Flashes, and Siren/Horn Indications
Status LED Flash Indications
LED Flashes			
Function
OFF					
Disarmed
Slow Flash			
Armed
Fast Flash				
Passive Arming Countdown
ON (Solid)				
Valet Mode
2 Flashes				
Zone 2 Trigger, Hood / Trunk
3 Flashes				
Zone 3 Trigger, Door
4 Flashes				
Zone 4 Trigger, Shock Sensor
5 Flashes				
Zone 5 Trigger, Ignition
Siren/Horn Chirp Indications
Chirps				
Function
Disarm
Arm
Door Ajar Upon Arming
Disarm / Triggered
Car Find
Parking Light Flash Indications
Flashes				
Function
Disarm
Arm
Disarm / Triggered
Car Find
ON (Solid or Slow Flash)
Remote Started
Remote Start Shutdown Diagnostics
Parking Light Flashes
Shutdown Zone
3 Flashes				
Hood / Brake Input
4 Flashes				
Remote Start Valet Mode
5 Flashes				
Manual Transmission Mode not ready
7 Flashes				
Tach not learned / Crank Average not 		
learned
To manually enter diagnostics and view the last shutdown, turn the ignition ON and
press and release the
button.
2017 Voxx Electronics Corporation. All rights reserved.
13
Optional 2-Way LED Remote Control
Optional 2 Way LED Remote Control Notifications / Responses
The 2 Way LED remote control responses outlined below are in addition to the normal
beep/LED flash that takes place upon pressing the buttons of the remote control.
Function					
Sounds / LED Flashes
Arm / Lock				
2 Beeps, 2 Flashes		
Arm - Door Ajar			
3 Beeps, 3 Flashes
Disarm / Unlock			
1 Beep, 1 Flash
Disarming / System Triggered		
4 Beeps, 4 Flashes
Trunk Release				
1 Beep / 1 Beep, 1 Flash if vehicle
was locked.
Valet Mode ON				
No Response
Valet Mode Off				
Melody
Trigger - Warn-Away
Short Tone, 1 Flash
Trigger - Full				
Trigger Melody, Flashing
Panic Mode				
Trigger Melody, Flashing
Anti-Carjack Mode On		
No Response
Anti-Carjack Mode Off		
1 Beep
Car Find					
Melody, 1 Flash
Remote Start Activation		
Start Melody, 1 Flash
Remote Start Confirmation		
4 Beeps, 4 Flashes
Remote Start Running		
1 Flash every 5 seconds
Remote Start - Failed to Start		
3 Beeps, 3 Flashes
Remote Start Shutdown		
3 Beeps, 3 Flashes
Turbo Timer Mode			
4 Beeps, 4 Flashes
AUX Mode ON				
1 Flash
AUX Mode OFF			
2 Flashes
Low Battery				
2 Beeps, 2 Flashes when button is
							pressed
14
caSECRS Owners revA
Optional 2-Way LCD Remote Control
Additional Features of the Optional 2 Way LCD Remote Control
Check Vehicle Status
Press and release
2 times then press
display the current status of the vehicle.
within 3 seconds, the transmitter will
Display Illumination
Press and hold the
button for 1 second. The display will illuminate for 5 seconds.
Melody / Vibration Mode
To have the remote control vibrate, play a melody tone or both each time it receives a
response from the vehicle press and release
then press and hold
for 2
seconds.
Button Beeps
To toggle button beeps on or off press and release
seconds.
then press and hold
for 2
Battery Save Mode
While in POWER SAVE MODE the 2-way LCD transmitter will NOT look for any
incoming signals from the main unit until a button is pressed. The LCD screen will
display SAVE to indicate that power save mode is ON. To enter power save mode
press and hold
for 5 seconds.
Clear Flashing Icons and Melody Sound
Press the
button 3 times within 3 seconds. This will clear the melody sound and
flashing icons on the LCD screen.
Stopping LCD Trigger Melody
To stop the alarm trigger melody if the system has been triggered WITHOUT
disarming the system, press any button one time only, this will not send a command to
the vehicle at this time and the alarm will continue to sound.
2017 Voxx Electronics Corporation. All rights reserved.
15
Button Lock
Press and release
then press hold the
for 2 seconds to toggle the button lock
on or off. When the button lock is active, the remote control will beep/vibrate 2 times
when a button is pressed indicating it is locked.
Illumination
Press and release
2 times then press and hold
for 2 seconds to toggle
illumination on or off. When on, the display will illuminate when it receives or sends a
command.
2 Car Mode
To control a second security system enter 2 car mode by pressing
then press
and
together for 3 seconds. When the icon appears on the transmitter’s LCD
screen it will control the second security system. Use the same method to exit 2 car
mode and resume control of the original vehicle’s security system.
NOTE: A second security system must be installed and the LCD transmitter must be
learned to it before this feature will operate the additional system.
Parking Meter Countdown
The parking meter countdown timer has 6 preset times, to access the preset times
and begin countdown press and release
then press and hold
for 2 seconds,
each additional press of
will increase the countdown time.
Adjusting the Clock and Timer Settings
The clock, alarm clock and programmable countdown timer are accessed through the
Function Menu. Press and hold
for 3 seconds to access the function menu, once
you have accessed the feature menu press and release
to scroll through each
feature and follow the steps below to adjust the settings for each. Press and hold
for 2 seconds to exit the menu.
Clock Hour			
Press
to increase or
to decrease
Clock Minute			
Press
to increase or
to decrease
Alarm Clock Hour		
Press
to increase or
to decrease
Alarm Clock Minute		
Press
to increase or
to decrease
Alarm Clock ON / OFF
Press
to turn ON or
to turn OFF
Countdown Timer Hour
Press
to increase or
to decrease
Countdown Timer Minute
Press
to increase or
to decrease
Countdown Timer ON / OFF
Press
to turn ON or
to turn OFF
16
caSECRS Owners revA
LCD Remote Control ICON’s
LOCK
UNLOCK
SYSTEM ARMED
VALET MODE
TRANSMITTING
IGNITION ON/TRIGGER
TRUNK TRIGGER
DOOR TRIGGER
HOOD TRIGGER
FULL SHOCK TRIGGER
SYSTEM TRIGGER
TIME COUNT DOWN
BATTERY INDICATOR
BATTERY SAVE MODE
VIBRATE/SILENT MODE
MELODY MODE
2 CAR MODE
TIME DISPLAY
ALARM CLOCK
ENGINE RUNNING
TIMER / TEMP.
START MODES
AUX MODE
AUX 1 OUTPUT
AUX 2 OUTPUT
AUX 3 OUTPUT
AUX 4 OUTPUT
AUX 5 OUTPUT
2017 Voxx Electronics Corporation. All rights reserved.
17
Remote Control Buttons & Functions
4-Button
Transmitter
Lock
Lock
Unlock
Car Find /
Panic
Start
Operation Method
Press and Release
Unlock
Press and Release
2 Step Unlock
Press and Release 2 times
Trunk
Push and Hold (3 Sec)
Car Finder
Press and Release
Panic
Push and Hold (3 Sec)
Remote Start
Press and Release (1 or 2 times
depending on selectable option)
Remote Start
Shutdown
Push and Hold (3 Sec)
Run Time
Extention
Press and Release 4 times.
AUX 1
Push and Hold (3 Sec)
Shock Bypass
Press and Release Lock then
Press Lock + Car Find
Hidden Alarm
Press and Release Car Find then
Press Lock
Press and Release
Passive Arming
Bypass
Turbo Timer
2 / 3 Hour Start
Daily Start Timer
Temperature
Start
Press Unlock + Start
Ignition ON/OFF, Press and Hold
Valet Button, Press Start 4 times
Press Lock + Start
Press Unlock + Start While Armed
AUX 2, 3, 4, 5 - Access in AUX Mode
Enter AUX Mode
AUX 2
AUX 3
AUX 4
AUX 5
18
Press and Hold Find + Start
Transmitter LED flashes 1 time
Push and Hold (3 Sec)
Push and Hold (3 Sec)
Push and Hold (3 Sec)
Push and Hold (3 Sec)
caSECRS Owners revA
LCD 5-Button
Transmitter
Lock
Lock
Unlock
Car Find /
Panic
Start
Function Operation Method
Press and Release
Unlock
Press and Release
2 Step Unlock
Press and Release 2 times
Trunk
Push and Hold (3 Sec)
Car Finder
Press and Release
Panic
Push and Hold (3 Sec)
Remote Start
Press and Release (1 or 2 times
depending on selectable option)
Remote Start
Shutdown
Push and Hold (3 Sec)
Run Time
Extention
Press and Release 4 times.
AUX 1
Push and Hold (3 Sec)
Shock Bypass
Press and Release Lock then
Press Lock + Car Find
Hidden Alarm
Press and Release Car Find then
Press Lock
Press and Release
Passive Arming
Bypass
Turbo Timer
2 / 3 Hour Start
Daily Start Timer
Press Unlock + Start
Ignition ON/OFF, Press and Hold
Valet Button, Press Start 4 times
Press Lock + Start
Menu
Temperature
Start
Press and Hold
Press Unlock + Start While Armed
AUX 2, 3, 4, 5 - Access in AUX Mode
Enter AUX Mode
AUX 2
AUX 3
AUX 4
Press and Hold F for 2 seconds
LCD displays AU
Push and Hold (3 Sec)
Push and Hold (3 Sec)
AUX 5
2017 Voxx Electronics Corporation. All rights reserved.
Push and Hold (3 Sec)
Push and Hold (3 Sec)
19
Replacing Remote Control Batteries
4 Button Remote Control - Model CAT4M & CATMLED		
The batteries inside each remote control should last approximately 1 year for the CAT4M
and 6 Months for the CATMLED under normal use. When the batteries become weak
you will notice the remote control range (the distance from the vehicle the remote control
will work) deteriorate and the small LED on the remote control will dim. Additionally, the
CATMLED will flash the LED 2 times each time a button is pressed when the battery is
low. To replace the remote control batteries:
1.
Remove 1 screw then disassemble the halves of the remote 		
control by unsnapping the back of the case.
2.
Remove the old battery, observing the +/- symbols on the 		
batteries and replace with a new battery.
3.
Reassemble the halves of the remote control and reinstall 1 screw.
4.
Test operation of the remote control.
2 Way LCD Remote Control - Model CATLCD		
The AAA battery inside the 2-way LCD remote control should last approximately 6
months under normal use. When the battery becomes weak you will notice the remote
control range (the distance from the vehicle the remote control will work) deteriorate and
the battery icon on the LCD remote control will show 1 bar or less.
1.
Gently slide the battery cover off of the remote control.
2.
Remove the old AAA battery, observing the +/- symbols on the 		
battery, and replace with a new AAA battery.
3.
Gently slide the battery cover on to the back of the remote control.
4.
Test operation of the remote control.
2 Way LCD Remote Control - Model CATRLCD		
The battery inside the 2 way LCD remote control is rechargeable, use the supplied
battery charger to charge the battery until the battery icon on the LCD screen shows 3
bars indicating charging is complete. It is recommended that the battery be fully charged
before normal use.
20
caSECRS Owners revA
LIMITED LIFETIME WARRANTY
Applies to Code Alarm Series Control Modules, Sirens, Sensors, and Relays.
Voxx Electronics Corporation (the Company) warrants to the original purchaser of this
product that should this product or any part thereof, (other than transmitters) under normal use and conditions, be proven defective in material or workmanship during the lifetime of the vehicle, in which it was originally installed from the date of original purchase
such defect(s) will be repaired or replaced with new or reconditioned product, (at the
Company’s option) without charge for parts or repair labor. A transmitter is warranted for
12 months from the date of original purchase.
To obtain repair or replacement within the terms of this Warranty, the product is to
be delivered with proof of warranty coverage (e.g. dated bill of sale), specification of
defect(s), transportation prepaid, to an approved warranty station. This Warranty is not
transferable.
This Warranty does not cover damage to the vehicle’s electrical system or costs
incurred for removal or reinstallation of the product. This Warranty does not cover batteries, broken LCD or OLED display screens, nor apply to any product or part thereof
which, in the opinion of the Company, has suffered or been damaged through alteration,
improper installation, mishandling, misuse, abuse, neglect, accident, or by removal or
defacement of the factory serial number/bar code label(s).
This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, SHALL
BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. IN NO CASE
SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL
DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY. No person or representative is authorized to assume for the Company any liability other than expressed
herein in connection with the sale of this product.
The company does not warrant that this product cannot be compromised or circumvented. THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY
IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO
EVENT, SHALL THE COMPANY’S LIABILITY EXCEED THE PURCHASE PRICE PAID
BY PURCHASER FOR THE PRODUCT WITHOUT COST OF INSTALLATION.
Some states do not allow limitations on how long an implied warranty lasts or the
exclusion or limitation of incidental or consequential damage so the above limitations or
exclusions may not apply to you. This Warranty gives you specific legal rights and you
may also have other rights which vary from state to state.
Voxx Electronics Corporation, 180 Marcus Blvd., Hauppauge, New York 11788 / 1-800-645-4994
128-9445
2017 Voxx Electronics Corporation. All rights reserved.
21
22
caSECRS Owners revA
2017 Voxx Electronics Corporation. All rights reserved.
23
Voxx Electronics Corporation.
Customer Service 1-800-421-3209
WWW.CODE-ALARM.COM
FCC COMPLIANCE
This device complies with Part 15 of the FCC rules and with RSS-210 of
Industry Canada. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including any interference that
may cause undesired operation.
Warning!
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
PATENTED: www.voxxintl.com/company/patents
24
caSECRS Owners revA

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Creator                         : Adobe InDesign CS6 (Windows)
Modify Date                     : 2017:06:22 17:26:32+08:00
Create Date                     : 2017:06:21 11:59:05-04:00
PXC Viewer Info                 : PDF-XChange Viewer;2.5.197.0;Jul  8 2011;20:50:13;D:20170622172632+08'00'
Page Count                      : 24
Tagged PDF                      : Yes
XMP Toolkit                     : XMP Core 4.1.1
Metadata Date                   : 2017:06:21 11:59:11-04:00
Creator Tool                    : Adobe InDesign CS6 (Windows)
Instance ID                     : uuid:7cc4d4f1-efc5-4617-8a27-f3ed3317f232
Original Document ID            : xmp.did:92DB55E119DAE311B39EA009B2672577
Document ID                     : xmp.id:7240A6819A56E71195C5E17C0844C98D
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:7140A6819A56E71195C5E17C0844C98D
Derived From Document ID        : xmp.did:9EB63BECD655E71190FCDF47A904B565
Derived From Original Document ID: xmp.did:92DB55E119DAE311B39EA009B2672577
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Windows)
History Changed                 : /
History When                    : 2017:06:21 11:59:05-04:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False

EXIF Metadata provided by EXIF.tools