Advanced Card Systems ACR1255 NFC Bluetooth Smart Card Reader User Manual 2 ACR1255
Advanced Card Systems Limited NFC Bluetooth Smart Card Reader 2 ACR1255
Contents
- 1. Users Manual
- 2. User Manual
Users Manual
ACR1255 NFC Bl uetooth Smart Card Reader User Manual V1.00 Name Prepared by: Tommy Wong Signature Date 2015-05-28 Reviewed by: Approved by: Subject to change without prior notice info@acs.com.hk www.acs.com.hk Table of Contents 1.0. Introduction ............................................................................................................. 3 1.1. 1.2. 1.3. 1.4. 1.5. NFC and Smart Card Reader ..............................................................................................3 Compact Design ..................................................................................................................3 Firmware ..............................................................................................................................3 Upgradeable Feature ...........................................................................................................3 Bluetooth® Connectivity ......................................................................................................3 Ease of Integration...............................................................................................................3 2.0. Features ................................................................................................................... 4 3.0. Typical Applications ............................................................................................... 6 4.0. Technical Specifications ...................................................................................... 10 info@acs.com.hk Version 1.00 www.acs.com.hk 1.0. Introduction ACR1255 NFC Bluetooth Smart Card Reader combines the latest 13.56 MHz contactless technology with Bluetooth Smart connectivity for on-the-go smart card and NFC applications. 1.1. NFC and Smart Card Reader ACR1255 supports ISO 14443 Type A and B smart cards, MIFARE®, FeliCa®, and most NFC tags and devices compliant with ISO 18092 standard. This makes it the ideal device for a broad range of solutions, such as hands-free verification for physical and logical access control, and inventory tracking. ACR1255 has both Bluetooth interface for pairing with mobile devices and USB Full Speed for PC-linked operation. Additionally, it can read/write at speeds of up to 424 Kbps for contactless smart card and NFC device access. 1.2. Compact Design With a compact design and a rechargeable Lithium-ion battery for power, ACR1255 is extremely portable and convenient for use anytime, anywhere with most Bluetoothenabled smartphones and tablets in the market. 1.3. Firmware Upgradeable Feature To save valuable cost and time, the firmware of ACR1255 could conveniently be upgraded infield to allow users to cope with the fast-changing technology for their applications in order to suit different scenarios. 1.4. Bluetooth® Connectivity With Bluetooth® Low Energy (LE) 4.0 technology, ACR1255 can connect wirelessly with ease to any device running on Android™ 4.3 and above, iOS 5.0 and above, Windows®, and Mac OS X® operating systems. 1.5. Ease of Integration ACR1255 could easily be installed for use with any PC running on Windows® operating system because it is PC/SC and CCID compliant. Its drivers are also compatible with Linux® and Mac OS X®. With its numerous features, the ACR12255 is the perfect Bluetooth NFC reader for your smart card solution. info@acs.com.hk Version 1.00 www.acs.com.hk 2.0. Features USB 2.0 Full Speed Interface Bluetooth Low Energy (LE) 4.0 Interface Plug and Play – CCID support brings utmost mobility1 USB Firmware Upgradeability2 Smart Card Reader: Built-in antenna for contactless tag access, with reading distance of up to 60 mm (depending on tag type) Supports ISO 14443 Part 4 Type A and B cards Supports MIFARE® and MIFARE DESFire® Supports FeliCa® Supports ISO 18092 Tags (NFC Tags) Built-in anti-collision feature (only one tag is accessed at any time) NFC Support: Card reader/writer mode Card emulation mode Supports AES-128 encryption algorithm Application Programming Interface: Supports PC/SC3 Supports CT-API (through wrapper on top of PC/SC) Supports Android™ 4.3 and above4 Supports iOS 5.0 and above Built-in Peripherals: Two user-controllable bi-color LEDs User-controllable buzzer Compliant with the following standards: EN60950/IEC 60950 ISO 18092 ISO 14443 CE FCC VCCI PC/SC CCID Applicable under PC-linked mode Same as above Same as above PC/SC and CCID support is not applicable. info@acs.com.hk Version 1.00 www.acs.com.hk o Bluetooth® QDL Microsoft® WHQL RoHS2 REACH info@acs.com.hk Version 1.00 www.acs.com.hk 3.0. Typical Applications Mobile Banking & Payment e-Government e-Healthcare Network Security Access Control e-Purse & Loyalty Public Key Infrastructure info@acs.com.hk Version 1.00 www.acs.com.hk 4.0. Driver installation Procedure The installation procedure is the same for Unified PC/SC Driver version 4.0.0.2 and above. The latest device drivers of the ACS Smart Card Readers may be downloaded from the ACS Driver Download Webpage: http://acs.com.hk/en/drivers/ To install the ACS Driver: 1. In the ACS Unified Driver folder, run the file Setup.exe. 2. Select the language of your choice, and then click OK. 3. The Setup Wizard will be displayed. Click Next to proceed with the installation. info@acs.com.hk Version 1.00 www.acs.com.hk 4. Click Next to install the driver to the default folder located at X:\Program Files\Advanced Card Systems Ltd\ACS Unified PCSC Driver 4.0.0.2\, with X as the drive letter of you local drive. Otherwise, click Change to choose another destination folder. 5. Click Install to begin the installation. info@acs.com.hk Version 1.00 www.acs.com.hk 6. Wait for the installation process to finish. 7. Once the driver installation is finished, click Finish to exit the setup wizard. info@acs.com.hk Version 1.00 www.acs.com.hk 5.0. Technical Specifications Universal Serial Bus Interface Type ............................................... USB Full Speed, four lines: +5 V, GND, D+ and DPower Source................................. From USB Speed............................................. 12 Mbps Supply Voltage………………………Regulated 5V DC Supply Current………………………<2 0mA Battery Specification…………………Lithium-ion Battery (320mAh) Firmware ........................................ Upgradeable through USB interface Bluetooth Interface Type ............................................... Bluetooth Smart 4.0 Power Source................................. From battery Operating Frequency ..................... 2. GHz Speed............................................. 1 Mbps (on-air data rate) Contactless Smart Card Interface Standard ........................................ ISO/IEC 18092 NFC, ISO 14443 Type A & B, MIFARE, DESFire, FeliCa Protocol .......................................... ISO 14443 T=CL for ISO14443-4 compliant cards and T=CL Emulation for MIFARE Classic 1K/4K, ISO 18092, FeliCa and NFC tags Operating Frequency ..................... 13.56 MHz Operating Distance ........................ Up to 60 mm (depending on tag type) Smart Card Read/Write Speed....... 106 Kbps, 212 Kbps, 424 Kbps Built-In Peripheral LED ................................................ 2, Bi-color (Red and Blue, Red and Green,) Buzzer ............................................ Monotone Application Programming Interface PC/SC CT-API (through wrapper on top of PC/SC) info@acs.com.hk Version 1.00 www.acs.com.hk Certifications/Compliance EN60950/IEC 60950, ISO 18092, ISO 14443, NFC Forum, CE, FCC, VCCI, PC/SC, CCID, RoHS 2, REACH, USB Full Speed, Bluetooth® Smart, Microsoft® WHQL Windows® 2000, Windows® XP, Windows Vista®, Windows® 7, Windows® 8, Windows® 8.1, Windows® Server 2003, Windows® Server 2008, Windows® Server 2008 R2, Windows® Server 2012, Windows® Server 2012 R2 Device Driver Operating System Support Windows® 98, Windows® ME, Windows® 2000, Windows® XP, Windows Vista ®, Windows® 7, Windows® 8, Windows® 8.1, Windows® Server 2003, Windows® Server 2003 R2, Windows® Server 2008, Windows® Server 2008 R2, Windows® Server 2012, Windows® Server 2012 R2 Linux®, Mac OS®, Android™1, iOS2 4.3 or above Android version is required for Bluetooth 4.0. 5.0 and above iOS version is required. Remarks: 1) 2) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 3) This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment . This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. info@acs.com.hk Version 1.00 www.acs.com.hk
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res Author : SZ093 Create Date : 2015:06:23 17:17:57+08:00 Modify Date : 2015:06:29 11:30:35-07:00 XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Format : application/pdf Creator : SZ093 Title : Microsoft Word - 2. ACR1255 User Manual Creator Tool : PScript5.dll Version 5.2.2 Metadata Date : 2015:06:29 11:30:35-07:00 Producer : Acrobat Distiller 9.0.0 (Windows) Document ID : uuid:b745c446-0f9b-4dcd-9746-2f0ba756dd7e Instance ID : uuid:09decd71-4dbc-4c2e-8f6f-4dfc8f43ff79 Page Count : 11EXIF Metadata provided by EXIF.tools