Advanced Card Systems ACR1256U ACR1256U User Manual
Advanced Card Systems Limited ACR1256U Users Manual
Users Manual
ACR1256U User Manual V1.00.00 Document Name: ACR1256U- User Manual.doc Prepared by: Reviewed by: Approved by: info@acs.com.hk Subject to change without prior notice www.acs.com.hk Version History Date By 2014-9-3 Henry Lin Changes First Release Version 1.00.00 Page 2 of 12 ACR1256U Document Title Here Design Specification Version 1.00.00 Document Title Here info@acs.com.hk www.acs.com.hk Table of Contents 1.0. Introduction ............................................................................................................... 4 2.0. Features ..................................................................................................................... 5 3.0. Architecture ............................................................................................................... 6 4.0. Connection with computer ....................................................................................... 7 4.1. plug the ACR1256U to a computer USB port, and the Green light will be flashing...............7 4.2. the driver will be auto install after plugging the reader. You should see the red box below .8 4.3. When you put a contactless card on the reader, the green LED will be on. .........................9 4.4. The card ID can be checked by some card tool software, e.g. APDU.exe, the card ID is shown in the red box below...................................................................................................................10 Appendix A. Parameter sheet .......................................................................................... 11 Appendix B. Firmware Upgrade Procedure ................................................................... 12 Method: Upgrade by APDU command ...........................................................................................12 Page 3 of 12 ACR1256U Document Title Here Design Specification Version 1.00.00 Document Title Here info@acs.com.hk www.acs.com.hk 1.0. Introduction The Security smart card reader ACR1256U is a USB PC-linked contactless card reader/writer. ACR1256U is compliant to ISO-14443 Parts 1- 4 supporting contactless card, Mifare cards, FeliCa cards. ACR1256U is capable to support PKI management。 Page 4 of 12 ACR1256U Document Title Here Design Specification Version 1.00.00 Document Title Here info@acs.com.hk www.acs.com.hk 2.0. Features Support contactless smart card Standard o ISO 14443 Parts 1- 4 Compliant o ISO-18092 (NFCIP-1) Compliant The ACR1256U supports the following Tag Types: MIFARE Classic. E.g. MIFARE 1K, 4K, MINI and Ultralight. ISO14443-4 Type A and B o FELICA T=CL emulation for MIFare 1K/4K PICCs. Multi-Blocks Transfer Mode is provided for efficient PICC access High Speed (424 kbps) Communication for PICCs. #Maximum 848 kbps Support 2 User-controllable LEDs Support User-controllable Buzzer USB1.1 full speed (12Mbps) Direct USB Firmware Upgradeable Microsoft CCID Compliant for PICC interface PCSC Compliant for Contactless Interface Page 5 of 12 ACR1256U Document Title Here Design Specification Version 1.00.00 Document Title Here info@acs.com.hk www.acs.com.hk 3.0. Architecture Z8D256U is for main processor for communication with PC, controlling the contactless chip, communication with peripherals. PN512 act as a contactless chip to perform the communication between contactless tags and Z8D256U. For communication architecture, the protocol between ACR1256U and PC is using CCID protocol. All the communication with PICC is PCSC Compliant. Page 6 of 12 ACR1256U Document Title Here Design Specification Version 1.00.00 Document Title Here info@acs.com.hk www.acs.com.hk 4.0. Connection with computer 4.1. plug the ACR1256U to a computer USB port, and the Green light will be flashing Page 7 of 12 ACR1256U Document Title Here Design Specification Version 1.00.00 Document Title Here info@acs.com.hk www.acs.com.hk 4.2. the driver will be auto install after plugging the reader. Page 8 of 12 ACR1256U Document Title Here Design Specification Version 1.00.00 Document Title Here info@acs.com.hk www.acs.com.hk 4.3. When you put a contactless card on the reader, the green LED will be on. Page 9 of 12 ACR1256U Document Title Here Design Specification Version 1.00.00 Document Title Here info@acs.com.hk www.acs.com.hk 4.4. The card ID can be checked by some card tool software, e.g. APDU.exe, the card ID is shown in the red box below Page 10 of 12 ACR1256U Document Title Here Design Specification Version 1.00.00 Document Title Here info@acs.com.hk www.acs.com.hk Appendix A. Parameter sheet Device ACR1256U Smart Card Reader/Writer Power supply Supply voltage................................ Regulated 5V DC Supply current ................................ <200mA (without smart card) Universal Serial Bus Interface Type ............................................... USB, four lines: +5V, GND, D+ and DConnector ...................................... Micro USB Connector Speed............................................. Full Speed Device, 12 Mbps Contactless Smart Card Interface Standard ............................................... ISO 14443 A & B Parts 1-4, Felica Protocol ................................................ ISO14443 T=CL for ISO14443-4 compliant cards and T=CL Emulation for MIFARE 1K/4K Smart card read / write speed ................ 106 kbps, 212 kbps, 424 kbps Operating Frequency for Contactless Cards Access Operating Frequency ............................. 13.56 MHz Antenna Antenna Size .......................................... 54mm x 34mm Operating distance ................................. up to 50 mm (Depend on Card Type) Built-in peripherals Monotone buzzer Dual-Color LED Case Dimensions .................................... 80.13 mm (L) x 50.06mm (W) x 9 mm (H) Color .............................................. White Cable Connector Length .................................................... 1.0m (Micro USB Cable) Standard/Certifications CE, FCC EN300330 EN55022 & EN55024 OS Windows 2K,XP,VISTA,WIN7,linux,Android,Mac OEM OEM-Logo Page 11 of 12 ACR1256U Document Title Here Design Specification Version 1.00.00 Document Title Here info@acs.com.hk www.acs.com.hk Appendix B. Firmware Upgrade Procedure Method: Upgrade by APDU command Step 1: Plug the Reader into PC’s USB Port Step 2: Send APDU command, let the reader enter the upgrade status. Step 3: Run Firmware Upgrade Application for Firmware Upgrade Step 4: Load the BIN, then Press “Start Program” For firmware upgrade. FCC Caution: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Page 12 of 12 ACR1256U Document Title Here Design Specification Version 1.00.00 Document Title Here info@acs.com.hk www.acs.com.hk
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Author : SZ093 Create Date : 2014:09:26 14:20:04+08:00 Modify Date : 2014:09:26 14:20:04+08:00 XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Format : application/pdf Creator : SZ093 Title : Microsoft Word - ACR1256U-User Manual--第一二点还是没改 Creator Tool : PScript5.dll Version 5.2.2 Producer : Acrobat Distiller 9.0.0 (Windows) Document ID : uuid:56e643f1-5a18-4fae-be3e-ca5b98d5e1db Instance ID : uuid:8be63ac1-b6e0-4ba2-bb0c-cbb00b132761 Page Count : 12EXIF Metadata provided by EXIF.tools