Advanced Card Systems ACR3901U-S Bluetooth 4.0 Smart Card Reader User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2445909
Application ID	OCM3LiHrJhHw/+8icLmJjg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	194.69kB (2433679 bits)
Date Submitted	2014-11-16 00:00:00
Date Available	2014-11-16 00:00:00
Creation Date	2017-10-20 12:58:49
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-20 12:58:49
Document Title	Microsoft Word - ACR3901U-S1 User Manual V1.00-for CFCC DOC.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Danny

ACR3901U-S User Manual
Name
Prepared by:
Danny Deng
Signature
Date
2014-06-07
Reviewed by:
Approved by:
Subject to change without prior notice
info@acs.com.hk
www.acs.com.hk
Version History
Date
2014-06-07
By
Danny Deng
Changes
Initial released
Version
1.00.00
Page 2 of 20
info@acs.com.hk
Version 1.00
www.acs.com.hk
Table of Contents
1.0.
USB Mode Loopback program .................................................................................. 4
2.0.
Bluetooth Mode Loopback program......................................................................... 8
3.0.
USB Mode Driver Installation .................................................................................. 12
4.0.
Bluetooth Adaptor Driver Installation .................................................................... 16
Page 3 of 20
info@acs.com.hk
Version 1.00
www.acs.com.hk
1.0. USB Mode Loopback program
This section introduces ACR3901U-S Reader using in USB Mode
Tools Requirement:
a. ACR3901U-S reader
b. ACOS3 Card
c.
USB Cable
d. PC & USB Mode loopback program “ESD4.exe”
Test Procedure:
1. Plug the ACR3901U-S reader into PC through USB cable
2. Turn the switch on reader to “USB Mode” (as the picture). *For the first time of use, user
needs to install a reader driver on PC. If the Windows could not install the “Microsoft
Usbccid Smartcard Reader (WUDF)” driver automatically, please refer to section 3.0 –
ACR3901U-S USB Mode Driver Installation to install the reader driver.
3. Under the path ACR3901U-S1_TestProgram/USB_Mode, Double-click ESD4.exe, you will
see the following interface
*The test program needs “Visual Basic 6.0 run time files” on PC, if “ESD4.exe”
could not be opened, please install “vbrun60sp5.exe” first under the path:
“ACR3901U-S1_TestProgram\USB_Mode\”, before running the program.
Page 4 of 20
info@acs.com.hk
Version 1.00
www.acs.com.hk
4. Step1
Press “Initialize” button to Search the smart card reader name
Then you will find the “ACS ACR3901U ICC Reader 0”
Page 5 of 20
info@acs.com.hk
Version 1.00
www.acs.com.hk
5. Step2
6.
Press “test” button
Now you will see that the program is working
The retry interval should be set to 15
Page 6 of 20
info@acs.com.hk
Version 1.00
www.acs.com.hk
7. Step3: After the testing, please press “Quit” button.
8. Unplug the reader cable and then switch the reader to “OFF”.
Page 7 of 20
info@acs.com.hk
Version 1.00
www.acs.com.hk
2.0. Bluetooth Mode Loopback program
This section introduces ACR3901U-S Reader using in Bluetooth Mode
Tools Requirement:
a. ACR3901U-S reader
b. ACOS3 Card
c.
USB Cable
d. Bluetooth 4.0 USB Adaptor Dongle
e. PC & Bluetooth Mode loopback program “ACR3901U-S1_BT.exe”
Test Procedure:
1. Plug in the Bluetooth 4.0 Dongle into PC (*For the first time of use, please install the
driver, please refer to section 4.0 – Bluetooth Adaptor Driver Installation)
2. Run “ACR3901U-S1_BT_Test.exe” in folder ACR3901U-S1_TestProgram/BT_Mode/
3. If a message “Failed COM Port open” shows, press “OK” to enter program.
4. The program will be shown as the picture below. In “Com Port” selection column, select the
suitable com port and then press “Connect” to initialize the Bluetooth adaptor. “Device
initialization successfully completed!” will be shown if success. (please refer to section 4.0 to
confirm which com port should be selected)
Page 8 of 20
info@acs.com.hk
Version 1.00
www.acs.com.hk
5. Insert the “ACOS3” test card into the ACR3901U-S reader.
6. Plug the ACR3901U-S reader into PC through USB cable for providing power.
7. Turn the ACR3901U-S reader to “Bluetooth Mode” and check that the green LED on the
reader will slowly flash. It means the reader is ready to be paired with.
8. Press the “Scan” button to scan the Bluetooth device. If a pairing ACR3901U-S reader is
discovered, it will display the reader information as the picture below:
Page 9 of 20
info@acs.com.hk
Version 1.00
www.acs.com.hk
9. Select the corresponding ACR3901U-S reader and then press “Connect” under Bluetooth
device. If connection is successful, there will be the messages showing that the connection is
successfully, as the picture below:
10. When the ACR3901U-S reader is successfully connected to the program, the blue LED and
the green LED on the reader will flash slowly at the same time.
Page 10 of 20
info@acs.com.hk
Version 1.00
www.acs.com.hk
11. Press “Start” button to start the test, now you will see the program is running for
reading/writing card. The program running information will be shown on the message window.
12. After the testing, press “Stop” to stop the card test; and then press “Disconnect” to disconnect
the ACR3901U-S reader and the program. There will be a popup window to show the device
successfully disconnected, press “OK”.
13. Close the test program; turn the reader to “OFF” and unplug it from PC.
Page 11 of 20
info@acs.com.hk
Version 1.00
www.acs.com.hk
3.0. USB Mode Driver Installation
1. Connect the ACR3901U-S Reader and plug the USB cable into PC, if the PC could not
install the driver “Microsoft Usbccid Smartcard Reader (WUDF)” automatically. User needs to
unzip and use the driver under ACR3901U-S1_TestProgram\USB_Mode\USBModeDriver\
2. At Computer icon, right click on “Computer” select “Properties”
3. Select “Device Manager”
Page 12 of 20
info@acs.com.hk
Version 1.00
www.acs.com.hk
4. Check Smart card reader, use the mouse to right click “ACR3901U ICC Reader”, and select
“Update device software…”
5. Select “Browse my computer for driver software”
Page 13 of 20
info@acs.com.hk
Version 1.00
www.acs.com.hk
6. Press “Browse” and select the unziped USB Mode driver under the path:
\ACR3901U-S1_TestProgram\USB_Mode\USBModeDriver
7. Press “Next”to install the driver.
8. The security window may popup and asks to confirm installation. Press “Install”
Page 14 of 20
info@acs.com.hk
Version 1.00
www.acs.com.hk
9. When the driver has finished installation, Press “Close”
10. In device manager, user could check the reader driver with name “ACR3901U ICC Reader” is
ready.
Page 15 of 20
info@acs.com.hk
Version 1.00
www.acs.com.hk
4.0. Bluetooth Adaptor Driver Installation
Bluetooth 4.0 USB Dongle
1. Insert the Bluetooth Adaptor into PC, if the PC automatically popups the driver software
installation window, just wait until the driver not successfully installed, press “Close”.
2. Mouse move to Computer, right click on “Computer” select “Properties”
Page 16 of 20
info@acs.com.hk
Version 1.00
www.acs.com.hk
3. Select “Device Manager”
4. Check “Other devices”, use the mouse to right click “Unknown device”, Select “Update device
software…”
Page 17 of 20
info@acs.com.hk
Version 1.00
www.acs.com.hk
5. Select “Browse my computer for driver software”
6. Press “Browse” and select the Bluetooth adaptor driver “ccxxxx_usb_cdc.inf”under the
following path:
\ACR3901U-S1_TestProgram\BT_Mode\AdaptorDriver\ccxxxx_usb_cdc.inf
7. Press “Next”to install the driver.
Page 18 of 20
info@acs.com.hk
Version 1.00
www.acs.com.hk
8. It the windows security warning message shows as below
anyway “to continue the installation.
，select “Install this driver software
9. Wait until the driver updates successfully, the message will shows which COM Port is
assigned to the Bluetooth adaptor. (*As the example below, the assigned com port is COM8.)
Press “Close” to finish the installation.
Page 19 of 20
info@acs.com.hk
Version 1.00
www.acs.com.hk
10.
After driver installation successfully finish, user can check the assigned com port again
from “Device Manager”
Page 20 of 20
info@acs.com.hk
Version 1.00
www.acs.com.hk

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : Danny
Create Date                     : 2014:09:18 11:06:53Z
Modify Date                     : 2014:11:16 17:23:31-08:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Format                          : application/pdf
Creator                         : Danny
Title                           : Microsoft Word - ACR3901U-S1 User Manual V1.00-for CFCC DOC.doc
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2014:11:16 17:23:31-08:00
Producer                        : GPL Ghostscript 8.15
Document ID                     : uuid:a008895e-b6fb-4ed8-9c8c-3f7452fd67d0
Instance ID                     : uuid:236a653f-1b24-4de9-9b85-8a20b288a426
Page Count                      : 20

EXIF Metadata provided by EXIF.tools