Advanced Control Technologies 05X7-0X USB Interface Device User Manual C HW2 USB installation instru

Advanced Control Technologies, Inc. USB Interface Device C HW2 USB installation instru

Manual

0656-012ZCU000 SpecificationsP/D 082903 HomeProby ADVANCED CONTROL TECHNOLOGIES, INC.Note: This product does not support "sleep" mode or "power saver" mode on computers. This insures that thecontroller will always maintain communication with Z-Wave enable devices. If you experience a problem,please read the following:Installation:Connect the ZCU000 to a USB port on the computer.Follow the instructions on the screen and insert the CD with the USB drivers and third party software.Follow instructions contained in the third party manual or installation documents provided on the CD.Problem: Computer Does Not Shut Down Properly if "Selective Suspend" Is EnabledThe information in this article applies to:· Microsoft Windows XP Home Edition · Microsoft Windows XP ProfessionalSymptomsAfter you attach a USB-based input device (such as a keyboard or mouse) to your computer, your computermay no longer shut down properly. For example, your computer may stop responding (hang) after you click Turnoff or Restart.CauseThis issue can occur when selective-suspend functionality is enabled on a device that does not support it. Thissituation can occur when two or more USB-based devices have the same vendor and product identificationnumbers, and only one of the devices supports the selective-suspend functionality.WorkaroundTo work around this issue, disable power management of the USB hub. NOTE: Although the followingprocedure may enable your computer to shut down properly, it may also reduce battery life on a laptopcomputer.To disable power management on the USB hub:Right-click My Computer, click Properties, click the Hardware tab, and then click Device Manager.Double-click the Universal Serial Bus controllers branch to expand it, right-click USB Root Hub, and thenclick Properties.Click the Power Management tab.Click to clear the box Allow the computer to turn off this device to save power check, then click OK,and then quit Device Manager.FCC NOTICENote: This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses, and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions may cause harmfulinterference to radio communications. However, there is no guarantee that interference will not occur in aparticular installation. If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.- Consult the dealer or an experienced radio/TV technician for help.This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) This device must accept any interference received,including interference that may cause undesired operation.

Navigation menu