Advanced Digital Broadcast B36-ADBA Set Top Box User Manual PFS Model DLNA Client

Download:
Mirror Download [FCC.gov]
Document ID	1850489
Application ID	DsZ1QbgEOTKvjopArkJG9Q==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	44.82kB (560265 bits)
Date Submitted	2012-12-03 00:00:00
Date Available	2012-12-05 00:00:00
Creation Date	2012-09-25 13:17:54
Producing Software	Adobe PDF Library 10.0
Document Lastmod	2012-12-03 13:21:46
Document Title	PFS - Model DLNA Client
Document Creator	Acrobat PDFMaker 10.1 for Word
Document Author:	Maciej Skrzypczak

Document Type :
Document Name:
Filename
PRODUCT FUNCTIONAL SPECIFICATION
Product Functional Specification – Set top box
ADB-1750WM
6HW7RS%R[$'%:0
RF exposure warning
This equipment must be installed and operated in accordance with provided
instructions and the antenna(s) used for this transmitter must be installed to
provide a separation distance of at least 20 cm from all persons and must
not be co-located or operating in conjunction with any other antenna or
transmitter. End-users and installers must be provide with antenna
installation instructions and transmitter operating conditions for satisfying RF
exposure compliance.
Document Type :
Document Name:

Filename
1.0
PRODUCT FUNCTIONAL SPECIFICATION
Product Functional Specification –Set top box
ADB1750WM
INTRODUCTION
This Product Functional Specification defines all known and relevant functional specifications related to
new ADB-1750WM Platform Product. Additional specifications or requirements may be added in
subsequent revisions should it become obvious from interactive discussions between ADB and the ODM
partner that such additions may be needed (for clarity, for compliance).
The ODM partner shall guarantee full compliance to each requirement and shall provide relevant details
(where applicable) as to how the proposed solution will satisfy the requirement.
All answers, comments, any relevant information, or assumptions shall be provided as w ell as the
completion of the spreadsheet table included in RFQ documentation package.
Within this document, the following formal terms are used to indicate the nature of the particular
requirement:
• A “Requirement“, abbreviated “R” - indicates a mandatory requirement, a requirement that
must be supported. The ODM partner shall indicate full, partial, or not compliant, and i n the
case of partial or not complaint, shall also provide supplementary explanations.
• An “Option“,
abbreviated “O” - indicates a requirement that may be supported optionally.
Any optional requirement shall be quoted separately (as indicated in the costing matrix provided
in the RFQ package). Obviously, supporting optional requirements positively influences the
assessment of the reply to the RFQ package.
• An “Information“, abbreviated “I” - indicates additional information that ADB is requesting for
the purpose of gaining a deeper understanding of the proposed solution. The ODM partner shall
provide the required information within its reply to the RFQ package and i s encouraged to
provide additional documentation, drawings, or other such materials as m ay be needed to
enrich the answer.
Additionally it has to be understood that ADB-1750WM Platform is a Platform. This means that it
is expected that a number of products will be spawned from the same design by leveraging the
modular design to configure products specific to the needs of specific customers without redesigning the product. Those mutually exclusive products differences are marked as ‘Variant’.
Document Type :
Document Name:
Filename
2.0
PRODUCT FUNCTIONAL SPECIFICATION
Product Functional Specification – Set Top Box
ADBA1750WM
HARDWARE ARCHITECTURE REQUIREMENTS
Table 1: Platform System Architecture
R [1]
Core SoC
The ADB-1750WM Platform must be designed to accommodate
the BCM7428 SoC.
R [2]
Random Access
Memory
The ADB-1750WM Platform shall be designed to support DDR3
1866MHz memory.
• Variant01: Memory size is 1Gbyte – default,
• Variant02: Memory size is 512Mbyte.
R [3]
NAND Flash
The ADB-1750WM Platform shall be designed to support NAND
Flash memory in a BGA package.
• Variant01: Memory size is 512Mbyte - default,
• Variant02: Memory size is 256Mbyte.
R [4]
Flash content
integrity
The ADB-1750WM Platform shall include a protection
mechanism to avoid Flash corruption due to power spikes, power
loss or brownout conditions.
R [5]
Local Storage
The ADB-1750WM Platform shall have a standard-form factor,
high-speed SDHC card slot.
R [6]
Broadcast
Environment
The ADB-1750WM Platform shall have a MoCA 2.0 (MoCA-M/PSPEC-V2.0-20120405) compliant interface. The device shall bridge
all MoCA and Ethernet traffic over home network interfaces.
R [7]
Remote Control
The ADB-1750WM Platform shall support IR Protocols
compliant with the Cisco and Motorola implementation; see R [111]
and R [112].
R [8]
Remote Control
The ADB-1750WM Platform shall include an RF4CE transceiver.
R [9]
Power Supply
An external power supply unit shall power the ECHO DLNA-Client
Platform.
R [10]
Fan
The ADB-1750WM Platform shall not be equipped with any
type of fan.
Document Type :
Document Name:
Filename
PRODUCT FUNCTIONAL SPECIFICATION
Product Functional Specification – Set Top Box
ADB-1750WM
Figure 1: Example of ADB-1750WM Platform architecture
Table 2: Rear Panel Requirements
R [11]
Base-band Audio
Video
The ADB-1750WM Platform shall include base-band
audio/video connectors.
• Variant01: No base-band audio video connectors – default
• Variant02: left and right audio outputs on RCA and SCART
audio-video connectors present.
R [12]
HDMI
The ADB-1750WM Platform shall have an HDMI 1.4a compliant
port.
R [13]
S/PDIF
The ADB-1750WM Platform shall include an optical S/PDIF
audio output port compliant to IEC 60958 -1.
USB
The ADB-1750WM Platform shall include a single USB 2.0 port
compliant to Universal Serial Bus Revision 2.0 Specification
available on the http://www.usb.org website.
R [14]
Document Type :
Document Name:
Filename
PRODUCT FUNCTIONAL SPECIFICATION
Product Functional Specification – Set Top Box
ADB-1750WM
2nd USB
The ADB-1750WM Platform shall include a second USB 2.0 port
on the side of the enclosure.
• Variant01: No 2nd USB connector – default,
• Variant02: 2nd USB connector present.
R [16]
Ethernet
The ADB-1750WM Platform shall include an RJ-45 port
• Variant01: 10/100BASE-TX Ethernet compliant with IEEE
802.3- 2008 – default,
• Variant02: 1000BASE-T Ethernet port compliant with
IEEE802.3 –2008. The Gigabit Ethernet port shall be
backwards compatible with 10/100BASE-TX Ethernet
specifications.
R [17]
F-Connector
The ADB-1750WM Platform shall include an F-Connector for
MoCA signal input and output.
Remodulator
The ADB-1750WM Platform shall include a Channel 3/4 RF
remodulating on F-Connector.
• Variant01: RF remodulator present – default,
• Variant02: No RF remodulator.
R [19]
SDHC slot
The ADB-1750WM Platform shall have an SDHC card slot as
defined in R [5] and Table 18. Electrical interface shall be
compliant with: SD Specifications Part 1 Physical Layer
Specification Version 3.01 May 18, 2010
R [20]
Power Jack
The ADB-1750WM Platform shall include a jack as power
supply receptacle described later in R [124].
R [21]
Other connectors
The ADB-1750WM Platform shall not include other connectors
or interfaces not mentioned in Table 2.
R [15]
R [18]
Table 3: Front Panel Requirements
R [22]
LED indicators
The ADB-1750WM Platform shall include two dual colour
(Red/Green) LED indicators located on front panel and controlled
by software.
R [23]
LED indicators
One LED shall be labelled Power/Standby and light green in Full
Power Mode. Red light is active in Standby Mode.
R [24]
LED indicators
One LED shall be labelled “Network” and light green while MoCA
link active.
Power Button
The ADB-1750WM Platform shall implement one power button
on the front panel. Its function shall be ‘Standby’. This button shall
be a mechanical, momentary switch. The requirements for
‘Standby Mode’ are detailed in “Table 5: Power Consumption
Requirements”
R [25]
Document Type :
Document Name:
Filename
R [26]
Other
PRODUCT FUNCTIONAL SPECIFICATION
Product Functional Specification – Set Top Box
ADB-1750WM
The ADB-1750WM Platform shall not include any other devices
or indicators not specified in Table 3.
Table 4: Requirements for Conditional Access, Digital Rights Management and Copy Protection.
R [27]
CA Design Rules
The printed circuit board shall be designed in such a manner that it
will ensure compliance with all the most recent requirements of
the CA vendors listed below:
• PlayReady
• Marlin
• SecureMedia
The ODM partner will shall guarantee compliance to all of the
above CA vendors.
R [28]
Macrovision Copy
Protection
The ADB-1750WM Platform design shall support
Macrovision/Rovi copy protection on RF Re-modulator video
output.
R [29]
HDCP DRM
Content transmitted over the HDMI interface shall be protected
with HDCP Specification Rev 1.4 (July, 2009).
Table 5: Power Consumption Requirements
R [30]
Power
Consumption
Control
The ADB-1750WM Platform shall support the following power
states fully managed by software:
•
Full Power
•
Standby
•
Off
R [31]
Power Up
The ADB-1750WM Platform shall power up in standby mode.
R [32]
Standby Mode
The ADB-1750WM Platform shall enter Standby mode upon
user input (power button or remote control unit) or command
received over its Ethernet and MoCA ports.
R [33]
Standby Mode
The ADB-1750WM Platform shall disable all video and audio
outputs in Standby Mode.
R [34]
Standby Mode
The ADB-1750WM Platform shall power down all non-volatile
local storage in Standby Mode.
R [35]
Standby Mode
The ADB-1750WM Platform shall enter Full Power Mode upon
user input (power button or remote control unit) or command
received over its Ethernet and MoCA ports while in Standby Mode.
IMPORTANT SAFETY INSTRUCTIONS
Safety First
moving the cart/apparatus combination
to avoid injury from tip-over.
1)
Read these instructions.
WARNING
2)
Keep these instructions.
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE TO PREVENT FIRE OR
3)
Heed all warnings.
4)
Follow all instructions.
5)
Do not use this apparatus near water.
personnel. Servicing is required when
CORD, RECEPTACLE, OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY
6)
Clean only with dry cloth.
the apparatus has been damaged in any
INSERTED AND NOT EXPOSED.
7)
Do not block any ventilation openings.
SHOCK HAZARD
CAUTION
TO PREVENT ELECTRICAL SHOCK, NEVER USE THIS PLUG WITH AN EXTENSION
Install in accordance with the manufacturer’s instructions.
8)
Do not install near any heat sources
such as radiators, heat registers, stoves,
or other apparatus (including amplifiers)
To prevent electrical shock, do not disassemble. No serviceable parts inside, refer servicing to
qualified service personnel. This unit is for indoor use only.
The lighting flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of uninsulated
”dangerous voltage” within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended
to alert
the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying
the appliance.
9)
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus,
the apparatus has been exposed to rain
or moisture, does not operate normally,
or has been dropped.
15) Power sources
the polarized or grounding-type plug.
A polarized plug has two blades with
one wider than the other. A grounding
type plug has two blades and a third
grounding prong. The wide blade or the
third prong are provided for your safety.
If the provided plug does not fit into
your outlet, consult an electrician for
replacement of the obsolete outlet.
walked on or pinched particularly at
Please take note of the following guidelines.
plugs, convenience receptacles, and
This reminder is provided to call the CATV System Installer’s attention to Article 820-93 of the
14) Refer all servicing to qualified service
Do not defeat the safety purpose of
safety precautions must be followed to ensure the safe and reliable operation of the decoder.
NOTE TO CATV SYSTEM INSTALLER
of time.
ADDITIONAL SAFETY INSTRUCTIONS
10) Protect the power cord from being
If the unit needs repair, contact your operator for repair or replacement.
storms or when unused for long periods
that produce heat.
This digital decoder has been manufactured to meet international safety standards. However,
REPAIRS
13) Unplug this apparatus during lightning
This decoder operates with an external
power indicated on the marking label.
Use a standard AC wall outlet; a
DC power source cannot be used.
Remember that contact with a 110-240
Volt AC power supply can be lethal.
16) Overloading
Do not overload wall outlets and extension cords as this can result in a risk of
fire or electrical shock.
17) Objects and liquid
the point where they exit from the
Do not push objects of any kind into the
apparatus.
decoder through any openings as it may
11) Only use attachments/accessories specified by the manufacturer.
NEC that gives guidelines for grounding. NEC Article 820-93 specifies that the cable ground
12) Use only with the cart, stand, tripod,
shall be connected to the grounding system of the building at a point closest to the cable entry
bracket, or table specified by the manu-
as practical.
facturer, or sold with the apparatus.
When a cart is used, use caution when
cause a short circuit and damage the
decoder or even cause fire. Do not spill
any liquid on the decoder. Be extremely
careful if this unit comes into contact
with water. Immediately disconnect the
power supply if possible.
18) Servicing
Never attempt to repair or reconstruct
the decoder yourself. A serious electric
shock may occur if this decoder is
by an unauthorized person. Refer all
Regulatory Information
servicing to qualified service personnel.
This device has been tested and found to comply with the limits for a Class B digital device,
22) Replacement parts
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
When replacement parts are required,
against harmful interference in a residential installation. This equipment generates, uses and
be sure the service technician has
can radiate radio frequency energy and, if not installed and used in accordance with the
used replacement parts specified by
instructions, may cause harmful interference to radio or television reception. However, there is
the manufacturer or ones that have the
no guarantee that interference will not occur in a particular installation. If this equipment does
same characteristics as the original
cause interference to radio and television reception, which can be determined by turning the
Upon completion of any service or
ones. Unauthorized substitutions may
equipment off and on, the user is encouraged to try to correct the interference by one or more
repairs to this decoder, ask the service
result in fire, electric shock, or other
of the following measures:
technician to perform safety checks to
hazards.
Reorient or relocate the receiving antenna
Increase the separation between the equipment and decoder
Connect the equipment into an outlet on a circuit different from that to which the decoder
repaired, disassembled or reconstructed
by an unauthorized person. Refer all
servicing to qualified service personnel.
19) Safety check
determine that the decoder is in proper
operational condition.
20) Outdoor Antenna Grounding
23) Battery usage
Notwithstanding any information provided
by the manufacturer in this manual
If an outside antenna or cable system is
regarding the use of batteries, the end
connected to the decoder, be sure the
user assumes all responsibility and
antenna or cable system is grounded.
liability to use and dispose of batteries
Article 810 of the National Electric Code,
in accordance with all applicable laws,
ANSI/NFPA 70, provides information with
rules and regulations. The manufacturer
regard to proper grounding of the mast
will not be liable to anyone for the end
and supporting structure and others.
user’s failure to use and/or dispose of
See figure below.
batteries in the proper manner and in
accordance with such laws, rules and
regulations, or for any defect contained
in batteries, which may cause injury
damage to persons or property.
21) Servicing
Never attempt to repair or reconstruct
the decoder yourself. A serious electric
shock may occur if this decoder is
repaired, disassembled or reconstructed
is connected
Consult the dealer or an experienced radio/TV technician for help
Changes or modification not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Copyright © 2012 ADB, S.A.
All rights reserved. No part of this publication may be reproduced in any form or by any means
or used to make any derivative work (such as translation, transformation or adaptation) without
written permission from ADB, S.A..
ADB, S.A. reserves the right to revise this publication and to make changes in content from
time to time without obligation on the part of ADB, S.A. to provide notification of such revision or
change. ADB, S.A. provides this guide without warranty of any kind, either implied or expressed,
including but not limited to, the implied warranties of merchantability and fitness for a particular
purpose. ADB, S.A. may make improvements or changes in the product(s) described in this
manual at any time.
This item incorporates copy protection technology that is protected by U.S. patents and other
intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are
prohibited.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC.
ADB, the ADB Logo are registered trademarks of ADVANCED DIGITAL BROADCAST S.A.
All other product or service names are the property of their respective owners.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : Maciej Skrzypczak
Create Date                     : 2012:09:25 13:17:54+08:00
Modify Date                     : 2012:12:03 13:21:46+08:00
Subject                         : ECHO DLNA-Client Platform
Has XFA                         : No
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Metadata Date                   : 2012:12:03 13:21:46+08:00
Creator Tool                    : Acrobat PDFMaker 10.1 for Word
Document ID                     : uuid:e838b558-233b-4a67-8e10-2e74af564769
Instance ID                     : uuid:3ef8c654-7993-4046-806c-a20062012b87
Format                          : application/pdf
Title                           : PFS - Model DLNA Client
Description                     : ECHO DLNA-Client Platform
Creator                         : Maciej Skrzypczak
Producer                        : Adobe PDF Library 10.0
Source Modified                 : D:20120907082004
Company                         : ADB SA
Category                        : Product Functional Specification
Headline                        : ECHO DLNA-Client Platform
Page Layout                     : OneColumn
Page Count                      : 9

EXIF Metadata provided by EXIF.tools