Advantech Co PIT-1501 Patient Infotainment Terminal/Computer User Manual PIT 1501W User Manual Ed1

Download:
Mirror Download [FCC.gov]
Document ID	1241039
Application ID	bv0xyCbzqxKxV1lwS9sp0Q==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	318.2kB (3977451 bits)
Date Submitted	2010-02-11 00:00:00
Date Available	2010-02-11 00:00:00
Creation Date	2010-02-09 02:40:24
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2010-02-09 10:41:28
Document Title	Microsoft Word - PIT-1501W_User_Manual_Ed1.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	jill.shiau

User Manual
PIT-1501W
Patient Infotainment Terminal/Computer
Copyright
The documentation and the software included with this product are copyrighted 2009
by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right
to make improvements in the products described in this manual at any time without
notice. No part of this manual may be reproduced, copied, translated or transmitted
in any form or by any means without the prior written permission of Advantech Co.,
Ltd. Information provided in this manual is intended to be accurate and reliable. However, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringements of the rights of third parties, which may result from its use.
Acknowledgements
Intel and Pentium are trademarks of Intel Corporation.
Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp.
All other product names or trademarks are properties of their respective owners.
Declaration of Conformity
FCC Class B
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installa- tion. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
inter- ference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interfer- ence to radio or television reception, which can be determined by
turning the equip- ment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
! Reorient or relocate the receiving antenna.
! Increase the separation between the equipment and receiver.
! Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
! Consult the dealer or an experienced radio/TV technician for help.
Warning!
Any changes or modifications made to the equipment which are not
expressly approved by the relevant standards authority could void your
authority to operate the equipment.
Caution!
Danger of explosion if battery is incorrectly replaced. Replace only with
the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturerís instructions.
PIT-1501W User Manual
Part No. 2008170200
Edition 1
Printed in Taiwan
April 2009
ii
Technical Support and Assistance
1.
2.
Warning!
Visit the Advantech web site at www.advantech.com/support where you can find th
latest information about the product.
Contact your distributor, sales representative, or Advantech's customer service
center for technical support if you need additional assistance. Please have the
following information ready before you call:
ñ Product name and serial number
ñ Description of your peripheral attachments
ñ Description of your software (operating system, version, application software,
etc)
ñ A complete description of the problem
ñ The exact wording of any error messages
1. Input voltage is rated 19 VDC, 2.63A (DC Mode).
2. Packing: Please carry the unit with both hands; handle with care.
3. Maintenance: to properly maintain and clean the surfaces, use only approved products o
clean with a dry applicator.
iii
PIT-1501W User Manual
Safety Instructions
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
Read these safety instructions carefully.
Keep this User Manual for later reference.
Disconnect this equipment from any AC outlet before cleaning. Use a damp
cloth. Do not use liquid or spray detergents for cleaning.
For plug-in equipment, the power outlet socket must be located near the equipment and must be easily accessible.
Keep this equipment away from humidity.
Put this equipment on a reliable surface during installation. Dropping it or letting
it fall may cause damage.
The openings on the enclosure are for air convection. Protect the equipment
from overheating. DO NOT COVER THE OPENINGS.
Make sure the voltage of the power source is correct before connecting the
equipment to the power outlet.
Position the power cord so that people cannot step on it. Do not place anything
over the power cord.
All cautions and warnings on the equipment should be noted.
If the equipment is not used for a long time, disconnect it from the power source
to avoid damage by transient overvoltage.
Never pour any liquid into an opening. This may cause fire or electrical shock.
Never open the equipment. For safety reasons, the equipment should be
opened only by qualified service personnel.
If one of the following situations arises, get the equipment checked by service
personnel:
a. The power cord or plug is damaged. b.
Liquid has penetrated the equipment.
c. The equipment has been exposed to moisture.
d. The equipment does not work well, or you cannot get it to work according to
the user's manual.
e. The equipment has been dropped and damaged.
f. The equipment has obvious signs of breakage.
DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE THE
STORAGE TEMPERATURE MAY GO BELOW -20° C (-4° F) OR ABOVE 60° C
(140° F). THIS COULD DAMAGE THE EQUIPMENT. THE EQUIPMENT
SHOULD BE IN A CONTROLLED ENVIRONMENT.
If your computer clock loses a significant amount of time or the BIOS configuration resets to default, the battery has no power.
Caution!
1. Do not replace power adaptor yourself. Please contact a qualified
technician or your retail.
2. The computer is provided with a battery-powered real-time clock
circuit. There is a danger of explosion if battery is incorrectly
replaced. Replace only with same or equivalent type recommended by the manufacture. Discard used batteries according to
the manufacturerís instructions
PIT-1501W User Manual
iv
17.
CLASSIFICATION:
Supplied by Class I adapter
No applied parts
Continuous operation
No AP or APG category
18.
Follow national requirements to dispose of unit.
19.
Maintenance: To properly maintain and clean the surfaces, use only approved
products or clean with a dry cloth.
20.
Contact information:
No.1, Alley 20, Lane 26, Rueiguang Road Neihu District, Taipei, Taiwan 114,
R.O.C
TEL: (02) 2792-7818
21.
ñ
ñ
ñ
ñ
22.
23.
This equipment is not to be used as a life support system.
Accessory equipment connected to the analog and digital interfaces must be in
compliance with the respective nationally harmonized IEC standards (i.e. IEC
60950 for data processing equipment, IEC 60065 for video equipment, IEC
61010-1 for laboratory equipment, and IEC 60601-1 for medical equipment.)
Furthermore all configurations must comply with the system standard IEC
60601-1-1. Anyone who connects additional equipment to the signal input part
or signal output part is configuring a medical system, and is therefore, responsi- b
that the system complies with the requirements of the system standard IEC
60601-1-1. The unit is for exclusive interconnection with IEC 60601-1 certified
equipment in the patient environment and IEC 60XXX certified equipment outside of the patient environment. If in doubt, consult the technical services
department or your local representative.
24.
A user must not allow SIP/SOPs and the patient to come into contact with one
another at the same time.
25.
The sound pressure level at the operator's position according to IEC 704-1:1982
is no more than 70dB (A).
DISCLAIMER: This set of instructions is given according to IEC 704-1.
Advantech disclaims all responsibility for the accuracy of any statements contained
Note!
Attention, please thoroughly consult the accompanying documentation.
PIT-1501W User Manual
PIT-1501W User Manual
vi
Contents
Chapter
Chapter
Introduction..........................................1
1.1
1.2
Overview ................................................................................................... 2
System Configuration................................................................................ 4
Hardware Description .........................5
2.1
General Specifications .............................................................................. 6
2.1.1 Standard PC Functions ................................................................. 6
2.1.2 Flat Panel Interface ....................................................................... 6
2.1.3 Module Features ........................................................................... 6
2.1.4 Power Environment....................................................................... 6
Mechanical Specifications ......................................................................... 7
2.2.1 Mechanical Specifications (Terminal) ........................................... 7
2.2.2 Mechanical Specifications (Terminal with Handset) ..................... 8
2.2.3 Mechanical Specifications (Terminal with Remote Controller).... 10
2.2.4 Mechanical Drawing for Button I/O ............................................. 12
2.2.5 Mechanical Drawing for Rear I/O ................................................ 12
External View .......................................................................................... 13
2.3.1 Front View ................................................................................... 13
2.3.2 Side View .................................................................................... 14
2.3.3 Rear View ................................................................................... 14
2.2
2.3
Chapter
Chapter
Chapter
Software Description.........................15
3.1
Windows XP Embedded Software Specifications ................................... 16
Design Requirements........................19
4.1
4.2
Environmental Specifications .................................................................. 20
Reliability ................................................................................................. 20
Installation..........................................21
5.1
5.2
5.3
5.4
Installation for Terminal........................................................................... 22
Installation for Handset ........................................................................... 23
Installation for Remote Controller............................................................ 24
Installation for Arm .................................................................................. 25
vii
PIT-1501W User Manual
PIT-1501W User Manual
viii
Chapter
Introduction
This Chapter briefly introduces
the PIT-1501W product.
! Overview
! System Configuration
1.1 Overview
The PIT-1501W Patient Infotainment Terminal is Advantechís standard product with
a built-in Windows XP Embedded OS. In addition to providing hospital bedside patient
information, remote monitoring, and care functions, the CPU and the LANenabled architecture of the PIT-1501W terminal also serves as an integrated hospital
gateway device. The PIT-1501W equipped with an Intel Atom 1.6GHz
processor, 15.6W touch screen, onboard Ethernet, and audio, plays a key
role as a hospital bedside care and monitoring solution. It connects the service
calls and LED light signals of a hospital room through the LAN to the hospital
PIT-1501W User Manual
2
1. Light Indicators 2. WIFI
3. Built-in 1.3 Mega-pixel CMOS Camera (optional)
4. Phone handset (optional) 5. Wired Remote Controller (optional)
6. RFID reader 7. Touch Screen 8. Nurse call with hard wire
9. Bottom I/O Arrangement (Mic-in, Line out, USB port ,Smart Card Reader)
10. Vesa Mounting /heat sink (75/100 compatible) 11. Access Door for CF card
12. Access Door for Hard drive and TV tuner Module.
10
12
11
14
13
14
PIT-1501W User Manual
1.2 System Configuration
The block diagram of a PIT-1501W Patient Infotainment Terminal based on
Hospital bedside environment is shown in the following diagram:
Silverthorne XL
437 FCBGA8
1.6GHZ /
FBS=533MHz
FSB 533/400
Analog RGB
CRT Conn.
LVDS TFT 18 x2 bit
LVDS
Connector
200pin DDR2-SO-DIMM X 1
Intel 945GME
DDR2 533/667 MT/S
(Calistoga)
Chrontel
CH7308B
SDVO
TO I/O PCM-093
USB x 3
LVDSTFT 24 x2 bit
USB Portx1 (180D)
DMI
PCI BUS 3.3V 33MHZ
IDSEL:AD27
(PIRQC/A#, GNT#1, REQ#1)
USB 2.0
ICH7-M
USB TOUCH
ELO
Azalia
page 17-19
SATA X1
Codec
ALC888
IDE
P-ATA HDD
Master
LPC
SIO 3114
BIOS
RS-232
For RFID
PIT-1501W User Manual
USB Reserve x 1
USB Camera
WIFI module
S-ATA HDD
Smart Card Reader
& SIM Card
Audio AMP
TO I/O PCM-093
Line-Out x1
Line-In x1
Mic In x1
Chapter
Hardware Description
This Chapter describes the hardware features of the PIT-1501W.
! Main Specifications
! General Specifications
! Mechanical Specifications
! External View
2.1 General Specifications
2.1.1 Standard PC Functions
CPU: Silverthorne XL 1.6GHz
BIOS: Award 1024K x 8 (8 Mbit) Flash BIOS
Chipset: Intel 945GME + ICH7M
Front side bus: Supports 400/533 MHz
Memory: DDR2 SODIMM 400/533 MHz up to 2 GB
Audio: HD audio codec ALC888 + 2 x 2.2 W amplifier
LAN: Marvell Yukon 88E8071 PCI-E Gigabit Ethernet controller,
SDVO/LVDS: Chrontel CH7307C SDVO to LVDS 18/24-bit transmitter
Universal serial bus (USB) port: Supports up to 8 USB ports, 5 port for internal I/O
，3 ports for external I/O
Mini PCIE bus expansion slot: Accepts one mini PCIE bus Card
Disk drive housing: Space for one 2.5" SATA HDD/CF Card
LED indicator: left and right side (orange)
2.1.2 Flat Panel Interface
Power button: With LED indicator
Audio: Mic-in, Line-out
USB: USB x 3
LAN: Gigabit LAN
SPK+MIC: build-in 2 x 2 W SPK + EM147 MIC
Button: GPIO Programmable function
Smart card reader: ISO7816 for IC card standard, PC/SC 1.0 for Windows,
smart card standard, Microsoft WHQL, EMV for Europay MasterCard Visa standard and USB-IF CCID standard
2.1.3 Module Features
Features
Interface
Description
Wi-Fi Wireless
RFID Kit
Camera module
Mini PCIE
Internal UART
Internal USB
802.11b&g&n
13.56 MHz,ISO-15693/14443
1.3 M pixels CMOS camera LED
module
GPIO
Programmable, orange light Handset
module
RJ12
Build-in SPK & MIC
Remote controller
RJ12
Micro controller, up to 9 keys
2.1.4 Power Environment
Power adaptor: AC/DC
ñ Input voltage: 100 Vac ~ 240 Vac
ñ Output voltage: 19 V @ 3.79 A
Medical adaptor: AC/DC
ñ Input voltage: 100 Vac ~ 240 Vac
ñ Output voltage: 19 V @ 2.63 A
PIT-1501W User Manual
2.2 Mechanical Specifications
2.2.1 Mechanical Specifications (Terminal)
System Dimensions: 418 (W) x 308.4 (H) x65 (D) mm
Front Cover:
Rear Cover:
Carton Dimensions: 620 (W) x 540 (H) x 180 (D) (excludes accessories box)
Mounting System: Back box for wall mounting
Gross Weight: 7.0 kg
Net Weight: 5.0 kg
PIT-1501W User Manual
2.2.2 Mechanical Specifications (Terminal with Handset)
PIT-1501W User Manual
Front Cover:
Rear Cover:
Carton Dimensions: 620 (W) x 540 (H) x 180 (D) (exclude accessories box)
Mounting System: Back box for wall mounting
Gross Weight: 7.0 kg
Net Weight: 5.0 kg
PIT-1501W User Manual
2.2.3 Mechanical Specifications (Terminal with Remote Controller)
PIT-1501W User Manual
10
Front Cover:
Rear Cover:
Carton Dimensions: 620 (W) x 540 (H) x 180 (D) (exclude accessories box
Mounting System: Back box for wall mounting
Gross Weight: 7.0 kg
Net Weight: 5.0 kg
11
PIT-1702 User Manual
2.2.4 Mechanical Drawing for Button I/O
Mic In
MIC
Line Out
USB USB
Smart Card
Line Out
Remote controller Conn
Hand-Set Conn
2.2.5 Mechanical Drawing for Rear I/O
External
Switch
Controller
DC in
LAN
USB
Reserved port
*External Switch Controller: Control port for LCD on/off switch on front panel.
PIT-1501W User Manual
12
2.3 External View
2.3.1 Front View
Front View (Terminal)
Front View (Terminal with Remote Controller)
Front View (Terminal with Remote Controller & Handset)
13
PIT-1501W User Manual
2.3.2 Side View
2.3.3 Rear View
Rear View (Terminal)
PIT-1501W User Manual
14
Chapter
Software Description
This Chapter describes the software features of the PIT-1501W.
! Windows XP Embedded Software Specifications
3.1 Windows XP Embedded Software Specifications
Real-Time OS Kernel
Windows XPE 7 Language Version
Driver List
Chipset
Graphics
Audio
LAN
Camera
Smartcard reader
Touch
WLAN
PIT-1501W User Manual
Intel US15W
Intel GMA500
Realtek Audio ALC880
Marvell Yukon Ethernet Controller
D-Max UVC 1.3M Webcam
ALCOR micro USB smartcard reader
Elo TtouchSys. 2216 AccuTouch@USB
Qcom WIFI module
16
Rev:
Rev:
Rev: 5.10.0.5512
Rev: 8.61.7.3
Rev: 6.11.200.4
Rev: 5.11.9520.7
Rev: 4.4.0.0
Rev:1.2.3.0
Embedded Application Software
! Advantech SUSI
SUSI Demo Program
1.
LED Indicator Control.
17
PIT-1501W User Manual
2.
LCD Panel Brightness Control.
3.
Nurse Call (GPIO function) Control.
Search for more information in *D:\Drivers for PIT-1501W series\Advantech\SUSI Documentations.
Note!
The CD-ROM drive is designated as D.
PIT-1501W User Manual
18
Chapter
Design Requirements
This Chapter describes the design
requirements of the PIT-1501W.
! Environmental Specifications
! Reliability
4.1 Environmental Specifications
Temperature & Humidity
Operating Temperature: 0 ~ 40° C
Storage Temperature: 0 ~ 60° C
Relative Humidity: 0 ~ 95% RH (Non-condensed)
Case / Panel Temperature
! Less than 40° C @ 25° C ambient temperature (front bezel)
Safety
! CE
EMI
! FCC class B approved
Vibration:
! 10 ~ 18 Hz, 1.5 mm peak-to-peak displacement
! 18 ~ 500 Hz, 1 G acceleration
4.2 Reliability
MTBF
20,000 hours
Touchscreen
! 1 million touch actuation times on a single point with a 5/8" diameter silicon fin- g
under a 350 g load at 2 Hz
! Power Requirements
! DC Input Voltage: 19 V
! Power Consumption: less than 60 W
PIT-1501W User Manual
20
Chapter
Installation
This Chapter describes the installation of the PIT-1702.
! Installation for Terminal
! Installation for Handset
! Installation for Remote Controller
! Installation for Arm
5.1 Installation for Terminal
Step 1. Fix Hook.
Step 2. Fix ARM + Handset Bracket + Remote Control Bracket.
PIT-1501W User Manual
22
5.2 Installation for Handset
Step 1. Fix Hook.
Step 2. Fix ARM + Handset Bracket + Handset.
23
PIT-1501W User Manual
5.3 Installation for Remote Controller
Step 1. Fix Hook.
Step 2. Fix ARM + Handset Bracket + Remote Control Bracket.
PIT-1501W User Manual
24
5.4 Installation for Arm
Step 1. Fix Hook.
Step 2. Fix ARM + Handset Bracket + Handset.
25
PIT-1501W User Manual
www.advantech.com
Please verify specifications before quoting. This guide is intended for reference
purposes only.
All product specifications are subject to change without notice.
No part of this publication may be reproduced in any form or by
any means, electronic, photocopying, recording or otherwise, without prior
written permission of the publisher.
All brand and product names are trademarks or registered trademarks of their
respective companies.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Fill forms, Extract, Assemble, Print high-res
Create Date                     : 2010:02:09 02:40:24Z
Modify Date                     : 2010:02:09 10:41:28+08:00
Page Count                      : 34
Creation Date                   : 2010:02:09 02:40:24Z
Mod Date                        : 2010:02:09 10:41:28+08:00
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : jill.shiau
Metadata Date                   : 2010:02:09 10:41:28+08:00
Creator                         : jill.shiau
Title                           : Microsoft Word - PIT-1501W_User_Manual_Ed1.doc

EXIF Metadata provided by EXIF.tools