Advantech Co PIT-1701 Panel PC User Manual

Advantech Co Ltd Panel PC

User manual

Patient Infotainment Terminal Platform Rev.0.1 Patient Infotainment Terminal PIT-1701 User Manual
Patient Infotainment Terminal Platform Rev.0.1 I. About This Guide This user guide aims to describe the PIT-1701 series device in an easy way to follow manner. It describes the hardware feature and software settings for PIT-1701. Users will learn how to use the PIT-1701 and its powerful features just by reading and following the instructions in this guide. Information is organized as followed : 1. About This Guide This Chapter describes the organization of this manual. 2. Introduction This Chapter briefly introduces the PIT-1701 product. 3. Hardware Description This Chapter describes the hardware features of the PIT-1701. 4. Software Description This Chapter describes the software features of the PIT-1701. 5. Design Requirements This Chapter describes the design requirements of the PIT-1701. 6. Installation This Chapter describes the installation of the PIT-1701.
Patient Infotainment Terminal Platform Rev.0.1 II. Introduction 1. Overview The PIT-1701 Patient Infotainment terminal is Advantech’s standard product with a built-in Windows XP embeded OS. In addition to the entertainment information access, Remote Monitoring/Security and Home Service functions, the Intel Celeron M 1.06GHz CPU speed and the LAN-enabled architectures can achieve an integrated Home Gateway function. The PIT-1701 equipped with a Intel Celeron 1.06GHz processor, 17” touch screen, onboard Ethernet and audio plays as the key of a home/ building security & automation solution. It connects the service / emergency calls and sensor signals of an apartment unit through the LAN to the administration center.
Patient Infotainment Terminal Platform Rev.0.1
Patient Infotainment Terminal Platform Rev.0.1 III. Hardware Description 1. General Specifications • Power adaptor: AC/DC Input voltage: 100Vac~250Vac Output voltage: 19V @ 3.42A • Disk drive housing: 1. Space for one 2.5" HDD, 1.0 Standard PC functions • CPU: Intel®Celeron M 1.06GHz • BIOS: Award 256 KB Flash BIOS • Chipset: Intel® 945GME + Intel®ICH-7M • Front side bus: 533/667 MHz • 2nd level cache: On-die 1MB L2 cache for Celeron M 1.06GHz CPU • RAM: One 200-pin SODIMM DDRII sockets accept 32 ~ 1000 MB DDR2 SDRAM • SATA interface: Support one SATA connector. The SATA host controller that supports independent DMA operation on two ports and supports data transfer rates of up to 3.0Gb/s. The SATA controller contains two modes of operation-a legacy mode using I/Ospace, and an AHCImode using memory space.
Patient Infotainment Terminal Platform Rev.0.1 • Universal serial bus (USB) port: Supports up to four USB ports(three on front side, one on rear side). All USB ports support USB high-speed signaling. High-speed USB 2.0 allows data transfers up to 480Mb/s. All ports are high-speed, full-speed and low-speed capable. • Mini PCI bus expansion slot: Accepts one type III mini PCI bus card • Battery: 3.0 V @ 195 mA lithium battery • Audio interface: Microphone-in, Line-out 2.0 Mechanical Specifications  Dimensions of system: 459 (W) x 401 (H) x 73 (D) mm -Front Cover: -Rear Cover:
Patient Infotainment Terminal Platform Rev.0.1  Dimensions of carton: 524 (W) x 567 (H) x 180 (D) mm  Fixing System: Back Box for Wall mounting  Gross Weight: 9.5 kg  Net Weight: 7.3 kg
Patient Infotainment Terminal Platform Rev.0.1
Patient Infotainment Terminal Platform Rev.0.1 IV. Outlook View 1. Front View 2. Rear View
Patient Infotainment Terminal Platform Rev.0.1 3. I/O Port View V. Hardware Specification Table Items Specifications CPU Intel Celeron M 1.06GHz Panel type TFT color LCD Screen Size 17” (Diagonal) Resolution 1,280(H) x 1024 (V) Luminance 300 nit (w/i TS) Contrast Ratio 800:1 Display Backlight MTBF 50,000 hours (typ) Working 1 GB DDR2 SDRAM Memory Storage 2.5” SATA HDD 80G Interface for User LED Emergency LED on both sides SIM card reader 1 Smart Card reader 1 USB Port 4 Interface for System Integrator MIC in jack 1 RJ-45 10/100Base T Ethernet Interface to the Internet Windows XP embeded Yes Embedded OS Windows XP Pro Yes Power Comsumption < 60W Dimension (W x H x D)
Patient Infotainment Terminal Platform Rev.0.1 Weight Operation Temperature Certificates CE Class B
Patient Infotainment Terminal Platform Rev.0.1 VI. Software Description 1. Windows XP embeded Software Spec Real-Time OS Kernel  Win XP English Version Device Drivers  CX 5530A Control ¾ PCI to ISA Bridge ¾ Graphics/video support for Intel PIII 1G ¾ USB host controller ¾ AC97 Codec Interface  ALC-200 Audio Codec  RTL8139C Ethernet Controller  Touch Screen Controller  LCD & Backlight Control  Video Capturing Circuit (BT878A) with GPIO ports  PCMCIA Controller  RS-232/422 Control & IRQ Service Routine  ASCII Terminal Support for debugging view Embedded Application Software  Automatic Back-light Off  Web Browser
Patient Infotainment Terminal Platform Rev.0.1 VII. Design Requirements Environmental Specifications  Temperature & Humidity 9 Operating Temperature: 0 ~ 45 o C 9 Storage Temperature: 0 ~ 60 o C 9 Relative Humidity: 0 ~ 95% RH (Non-condensed)  Case / Panel Temperature 9 Less than 40 o C @ 25 o C ambient temperature (front bezel) 9  Safety 9 CE 9  EMI 9 FCC class B approved 9  Vibration: 9 10~18Hz, 1.5mm peak-to-peak displacement 9 18~500Hz, 1G acceleration Reliability  MTBF 9 20,000 hours  Touch Screen 9 1 million touch actuation times on a single point with a 5/8" diameter silicon finger under a 350g load at 2 Hz  Power Requirements 9 DC Input Voltage: 19V
Patient Infotainment Terminal Platform Rev.0.1 9 Power Consumption: less than 60W

Navigation menu