Advantech Co PWS-770MC Computer User Manual V4 12 EV User Manual
Advantech Co Ltd Computer V4 12 EV User Manual
User Manual.pdf
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2001298 |
| Application ID | W+58XcOvO2rydNsb03N+BQ== |
| Document Description | User Manual.pdf |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 112.9kB (1411222 bits) |
| Date Submitted | 2013-06-26 00:00:00 |
| Date Available | 2013-10-13 00:00:00 |
| Creation Date | 2013-03-15 10:57:33 |
| Producing Software | PDF-XChange Viewer [Version: 2.0 (Build 40.7) (Nov 25 2008; 17:31:42)] |
| Document Lastmod | 2013-06-14 10:41:43 |
| Document Title | Template_V4.12_EV_User_Manual |
| Document Creator | FrameMaker 10.0.2 |
| Document Author: | richard.ponce |
Copyright The documentation and the software included with this product are copyrighted 2013 by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements in the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable. However, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringements of the rights of third parties, which may result from its use. Acknowledgements All other product names or trademarks are properties of their respective owners. PWS-770 User Manual Part No. 2008077000 Edition 1 Printed in Taiwan March 2013 ii Declaration of Conformity CE Conformity Statement Radio products with the CE alert marking comply with the R&TTE Directive (1999/5/ EC) issued by the Commission of the European Community. Compliance with this directive implies conformity to the following European Norms (in brackets are the equivalent international standards) EN 60950-1 (IEC60950-1) - Product Safety Products that contain the radio transmitter are labeled with CE alert marking and may also carry the CE logo. FCC Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference; 2. This device must accept any interference received, including interference that may cause undesired operation. Caution! Exposure to Radio Frequency Radiation. The radiated output of this device is far below the FCC radio frequency exposure limits. Nevertheless, the device shall be used in such a manner that the potential for human contact during normal operation is minimized. When connecting an external antenna to the device, the antenna shall be placed in such a manner to minimize the potential for human contact during normal operation. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm (8inches) during normal operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures: However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced computer technician for help Technical Support and Assistance 1. Visit the Advantech website at http://support.advantech.com where you can find iii PWS-770 User Manual 2. the latest information about the product. Contact your distributor, sales representative, or Advantech's customer service center for technical support if you need additional assistance. Please have the following information ready before you call: – Product name and serial number – Description of your peripheral attachments – Description of your software (operating system, version, application software, etc.) – A complete description of the problem – The exact wording of any error messages Safety Instructions Use the following safety guidelines to help protect yourself and PWS-770. Do not attempt to service the PWS-770 yourself. Always follow installation instructions closely. Be sure that nothing rests on the AC adapter's power cable and that the cable is not located where it can be tripped over or stepped on. Do not cover the AC adaptor with papers or other items that will reduce cooling; also, do not use the AC adapter while it is inside a carrying case. Use only the AC adapter, power cord, and batteries that are approved for use with this PWS-770. Use of another type of battery or AC adapter may cause risk of fire or explosion. If you use an extension cable with the AC adapter, ensure that the total ampere rating of the products plugged in to the extension cable does not exceed the ampere rating of the extension cable. When you move the PWS-770 between environments with very different temperature and/ore humidity ranges, condensation may form on or within the PWS-770. To avoid damaging the PWS-770, allow sufficient time for the moisture to evaporate before using the PWS-770. When you disconnect a cable, pull on its connector or on its strain relief loop, not on the cable itself. As you pull out the connector, keep it evenly aligned to avoid bending any connector pins. Also, before you connect a cable make sure both connectors are correctly oriented and aligned. PWS-770 User Manual iv Battery Safety RTC Battery Caution RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. Do not place the battery incorrectly as this may cause danger of explosion. Dispose of used batteries according to the manufacturer's instructions. Do not dispose of batteries in a fire. They may explode. Check with local authorities for disposal instructions. Battery Pack Caution The battery used in this device may present a risk of fire or chemical burn if mistreated. Do not disassemble, heat above 50°C, or incinerate. Replace internal battery with 46-12381-030 Li-ion 11.1V 1900mAh and second battery with Li-ion 11.1V 5000mAh Cell SANYO only. Use of another battery may present a risk of fire or explosion. Dispose of used batteries according to local disposal regulations. Keep away from children. Do not disassemble and do not dispose of in a fire. Battery Charge Notice It is important to consider the environment temperature whenever you are charging the Lithium-Ion battery pack. The process is more efficient at normal room temperature or slightly cooler. It is essential that you charge batteries within the stated range of 0°C to 40°C. Charging batteries outside of the specified range could damage the batteries and shorten their charging life cycle. Storage and Safety Notice Although charged Lithium-Ion batteries may be left unused for several months, their capacity may be depleted due to the build up of internal resistance. If this happens they will require recharging prior to use. Lithium-Ion batteries may be stored at temperatures between -20°C to 60°C, however they may be depleted more rapidly at the high end of this range. It is recommended to store batteries within normal room temperature ranges. PWS-770 User Manual PWS-770 User Manual vi Contents Chapter Chapter Chapter Chapter Chapter Rugged and Ready to Go....................1 1.1 1.2 1.3 1.4 1.5 1.6 Symbols Used in this Manual.................................................................... 2 Product Features....................................................................................... 2 Package Contents..................................................................................... 2 Optional Accessories ................................................................................ 3 Optional Modules ...................................................................................... 3 Exploring the PWS-770............................................................................. 3 1.6.1 Front View..................................................................................... 3 1.6.2 Rear View ..................................................................................... 4 1.6.3 Right View..................................................................................... 5 1.6.4 Left View ....................................................................................... 5 1.6.5 Bottom View.................................................................................. 6 Getting Started.....................................7 2.1 2.2 2.3 2.4 2.5 2.6 2.7 Installing the Rubber Bumpers.................................................................. 8 Removing the Rubber Bumpers................................................................ 8 Inserting a Memory Card........................................................................... 8 Removing a Memory Card ........................................................................ 9 Installing a SIM........................................................................................ 10 Installing an MSR (Optional) ................................................................... 11 Installing a Scanner (Optional)................................................................ 11 Making Connections .........................13 3.1 3.2 3.3 3.4 3.5 Connecting the Power............................................................................. 14 Connecting to a Monitor .......................................................................... 14 Connecting USB Devices........................................................................ 15 Connecting Headphones......................................................................... 15 Connecting a Microphone ....................................................................... 15 Turning On .........................................17 4.1 Controlling the PWS-770......................................................................... 18 4.1.1 Using the Touch Screen ............................................................. 18 4.1.2 Using the Tap Function............................................................... 18 4.1.3 Calibrating the Touch Screen ..................................................... 18 4.1.4 Using the Control Panel Buttons................................................. 20 4.1.5 Using the On-Screen Keyboard .................................................. 20 4.1.6 Configuring the Function Buttons................................................ 21 4.1.7 Using the Mode Button ............................................................... 22 4.1.8 Adjusting Screen Brightness....................................................... 22 4.1.9 Adjusting the Volume .................................................................. 22 Wireless Connections .......................23 5.1 5.2 WiFi Connection...................................................................................... 24 Bluetooth Connections ............................................................................ 25 5.2.1 Setting Up Bluetooth ................................................................... 25 3G Module Connection (Optional)........................................................... 27 5.3.1 Setting Up 3G Module................................................................. 28 5.3 vii PWS-770 User Manual 5.4 GPS Connection (Optional) .................................................................... 29 Advanced Settings............................ 31 6.1 6.2 Checking Battery Status ......................................................................... 32 Maintenance ........................................................................................... 33 6.2.1 Maintaining the Battery ............................................................... 33 6.2.2 Maintaining the LCD Display ...................................................... 33 6.2.3 Cleaning the PWS-770 ............................................................... 33 Appendix A Specifications.................................... 35 A.1 A.2 Specifications.......................................................................................... 36 Optional Accessories .............................................................................. 37 A.2.1 External Battery .......................................................................... 37 A.2.2 Tablet PC Docking...................................................................... 38 A.2.3 Adjustable Stand......................................................................... 40 A.2.4 Handstrap and Shoulder Strap ................................................... 42 A.2.5 Vesa Mount................................................................................. 44 Chapter PWS-770 User Manual viii Chapter Rugged and Ready to Go Congratulations on your purchase of the PWS-770 Semi-Rugged Tablet PC. This product combines rugged design with reliable performance and powerful functionality to best suit all your needs in a wide range of working conditions. This user manual outlines all you need to know to set up and use your PWS-770. If you have any further questions or queries, contact our technical support team via our website: http://www.advantech.com.tw/ 1.1 Symbols Used in this Manual Warning! Denotes information that must be observed. Failure to do so may result in personal harm or damage to the product. Note! Denotes information that must be observed. Failure to do so may result in personal harm or damage to the product. 1.2 Product Features Rugged design High-performance Intel® Atom® processor Built-in WLAN/Bluetooth/GPS/WWAN functions IP54 sealing built to withstand a 4 ft drop 10.4” Sunlight option / XGA TFT LCD I/O ports for expansion Long battery life 1.3 Package Contents Ensure all the following items are present when you receive your PWS-770. If any of these items are missing, contact your vendor immediately. Note! Screens used in this manual are for illustrative purposes only. Actual screens may vary depending on your product version. AC power adaptor Stylus pen Rubber bumpers Second battery option PWS-770 User Manual Chapter 1 1.4 Optional Accessories Desk docking External battery Handstrap Shoulderstrap Vesa Mount Rugged and Ready to Go 1.5 Optional Modules 1D / 2D barcode scanner MSR (1+2+3 track card reader) RFID 13.56M WWAN GPRS/3G/3.5G GPS module 2M/5M camera module 1.6 Exploring the PWS-770 1.6.1 Front View PWS-770 User Manual No. Component Power LED Off: Power off Solid Green: Power on (Battery > 30%) / Battery charge full Blinking Orange: Battery charging / Battery low HDD LED Lights green to indicate hard disk drive activity. WLAN LED Off: No RF signal / No LAN connection Solid green: WLAN connected Blinking green: TX/RX transmission Microphone S1 / Brightness button Can be assigned as a function key. When mode is enabled, press to decrease brightness. S2 / Brightness button Functions as a barcode switch key when a barcode scanner is connected, otherwise, can be assigned as a function key. When mode is enabled, press to increase brightness. Rubber bumper indents Lock the rubber bumpers Touch-sensitive display Speakers 10 Function keys 12 Keyboard button 13 Mode button 14 Enter button 1.6.2 Rear View PWS-770 User Manual 1 Left compartment Holds the camera Contains the barcode scanner connectors WWAN module External battery contacts Right compartment Contains connectors for MSR and RFID mSATA door External battery lock 1.6.3 Right View No. Component Microphone jack Headphone jack VGA port Serial port 1.6.4 Left View No. Component Power button USB ports (2) SD card slot DC-in jack PWS-770 User Manual Rugged and Ready to Go Component Chapter 1 No. 1.6.5 Bottom View No. Component Docking connector PWS-770 User Manual Chapter Getting Started 2.1 Installing the Rubber Bumpers To protect the housing case of PWS-770, install the rubber bumpers. 1. Install the rubber bumpers on the left and right side of PWS-770. 2. Make sure the rubber bumpers are aligned and locked on the indents. 2.2 Removing the Rubber Bumpers From the rear of the tablet PC, remove the rubber bumpers. 2.3 Inserting a Memory Card You can insert an SD card to store data, which needs to be later transferred to another machine, or to simply expand the storage capacity of the PWS-770. 1. Open the SD card compartment cover. 2. Insert the SD card with the metal contacts facing upwards, until it clicks into place. PWS-770 User Manual Close the memory card compartment cover. Chapter 2 3. Getting Started 2.4 Removing a Memory Card 1. Open the SD card compartment cover. 2. Press the SD card inwards to eject it from the slot. 3. Remove the card and close the SD card compartment cover. PWS-770 User Manual 5. Screw the WWAN module door. Getting Started Close the SIM card cover and push back the SIM card cover. 2.6 Installing an MSR (Optional) 1. Make sure the system is turned off. 2. 3. 4. Unscrew the right compartment cover to remove. Attach the MSR connector to the connectors inside the compartment. Screw to secure the MSR module onto the tablet PC.PWS-770 User Manual 2.7 Installing a Scanner (Optional) The 1D or 2D barcode scanner module comes with a 2M CCD camera. 1. Make sure the system is turned off. 2. Unscrew the left compartment cover. 11 Chapter 2 4. PWS-770 User Manual 3. Remove the camera connector. 4. 5. Attach the scanner connector to the connector inside the compartment. Screw to secure the scanner module onto the tablet PC. PWS-770 User Manual 12 Chapter Making Connections 3.1 Connecting the Power Before you can use your PWS-770, you must fully charge the battery. Connect the power adapter as shown and leave to charge for: A minimum of 2 hours when using the internal battery A minimum of 8 hours when a second battery is installed Condition: The operation time is based on the LCD backlight at 50% and the average utilization of the system under 10%. 3.2 Connecting to a Monitor You can connect the PWS-770 to an external monitor for enhanced viewing. Connect one end of a VGA cable to the VGA port on the right side of the PWS-770. Connect the other end to the VGA port on the monitor. PWS-770 User Manual 14 You can connect peripheral devices, such as a USB keyboard and mouse, as well as other wireless devices using the USB ports on the left side of the PWS-770. You can connect a pair of headphones using the headphone jack on the right side of the PWS-770. 3.5 Connecting a Microphone The PWS-770 features a built-in microphone, but you can still connect an external microphone if needed. Connect the microphone to the microphone jack on the right side of the PWS-770 as shown. 15 PWS-770 User Manual Making Connections 3.4 Connecting Headphones Chapter 3 3.3 Connecting USB Devices PWS-770 User Manual 16 Chapter Turning On 1. Press and hold the power button to turn on the PWS-770. 4.1 Controlling the PWS-770 4.1.1 Using the Touch Screen The PWS-770 is equipped with touch screen technology, for ease of use when you are on the go. Simply tap the screen with your finger to select icons and run applications. 4.1.2 Using the Tap Function When you tap on the screen with the a pen or stylus, it emulates click functions of a regular mouse. To emulate a left click single tap the screen once. To emulate a right click tap and hold the screen. To emulate a double click, tap the screen twice. 4.1.3 Calibrating the Touch Screen To calibrate the touch screen, tap Start > All Programs >PenMount Windows Universal Driver > Utility > PenMount Control Panel to open PenMount Control Panel. 1. From PenMount Control Panel, highlight PenMount 6000 RS232 under the Device tab. and tap Configure. The Device configuration screen opens. PWS-770 User Manual 18 Tap the Calibrate tab and you will see two options: Standard Calibration: select this option to start 5-point Standard Calibration. Advanced Calibration: select this option to use 4, 9, 16, or 25 points to calibrate the screen. Check Plot calibration data to enable touch panel linearity comparison graph. The blue lines show linearity before calibration and black lines show linearity after calibration. Touch the points as displayed onscreen using the pen. Chapter 4 2. Turning On 3. 19 PWS-770 User Manual 4.1.4 Using the Control Panel Buttons The control panel buttons are located on the front side of PWS-770. See below for a description of each button and its function. Button Name Function Function Press to access your favorite programs. Keyboard Press to access the on-screen keyboard. Mode Press to enable/disable mode. Enter Press to emulate the Enter key. S1 When mode is enabled, press to decrease brightness setting When mode is disabled, functions as the F4 key; press to access your favorite program. S2 When mode is enabled, press to increase brightness setting. When mode is disabled, press to call up barcode function if available. Otherwise, functions as the F5 key. 4.1.5 Using the On-Screen Keyboard Press to bring up the on-screen keyboard. Use your finger to tap and enter letters, numbers and symbols as you would with a regular keyboard. To type capital letters tap the lock icon on the on-screen keyboard. To use handwriting, tap upper left button of On-Screen Keyboard. PWS-770 User Manual 20 Chapter 4 The F1, F2, F3, S1 (F4) and S2 (F5) can be configured as shortcuts to access your favorite or frequently used programs. 1. Press the function button to which you want to assign a program shortcut to. The function button screen appears. 2. Tap to locate the program on the hard drive. 3. To remove a configured program, tap. 4. Tap OK to save all new settings. Once you have assigned a function to one of the buttons, you can change it at a later date by tapping on the Mode icon on the system tray. Select Function Key Setting from the menu and follow the procedure described above from step 2 to make any changes. 21 PWS-770 User Manual Turning On 4.1.6 Configuring the Function Buttons 4.1.7 Using the Mode Button Press “Mode Button” to enable or disable mode. When mode is enabled, press S1 and S2 to adjust the brightness setting. When mode is disabled, “S1” functions as the F4 key while “S2” functions as the F5 key. If a barcode scanner is installed,”S2” functions as the barcode switch key. 4.1.8 Adjusting Screen Brightness 1. 2. Ensure mode is enabled. Press “S1” to decrease brightness, or “S2” to increase brightness. 4.1.9 Adjusting the Volume 1. Tap the Volume icon on the system tray. 2. Move the slide to adjust volume. PWS-770 User Manual 22 Chapter Wireless Connections 5.1 WiFi Connection Note! WiFi access requires a separate purchase of a service contract with a wireless service provider. Contact a wireless service provider for more information. The PWS-770 comes pre-loaded with WLAN module, you can send and receive signals to a WiFi network then synchronize files. A wireless network can be added either when the network is detected or by manually entering settings information. Before doing these steps, determine if authentication information is needed. 1. Right-click the wireless connection icon in the notification area. 2. Select one of the wireless connections and click Connect. 3. You are prompted to enter a Security key for secure access. Contact the network administrator for this key. PWS-770 User Manual 24 Enter the required Security key and then tap OK to connect. The wireless connection is negotiated and you see the following screen. 5.2 Bluetooth Connections The PWS-770 comes with built-in Bluetooth functionality that allows you to connect and communicate with other Bluetooth-enabled devices. 5.2.1 Setting Up Bluetooth Follow these instructions to set up a Bluetooth connection. 1. In notification area, tap Bluetooth logo and select Add a Device. 25 PWS-770 User Manual Wireless Connections The wireless connection icon in the notification area shows a connected status whenever a wireless connection is present. Chapter 5 4. 5. 2. Select Bluetooth device and tap Next to add Bluetooth device. 3. Select Next for both PWS-770 and the blue tooth device after passkey is confirmed. 4. The Bluetooth device is successfully added into PWS-770. PWS-770 User Manual 26 To view Bluetooth device added, tap Show Bluetooth Devices. It is recommended that you use a passkey to prevent unauthorized access to your PWS-770. 5.3 3G Module Connection (Optional) GPRS function is optional with PWS-770. It allows you to make 3G connection to the internet. See “Installing a 3G Module (optional)” on page 11 for installation instruction. Note! Before setting up GPRS, obtain the access point (AP) from your SIM card’s network service provider. 27 PWS-770 User Manual Wireless Connections Note! Chapter 5 5. 5.3.1 Setting Up 3G Module 1. 2. Tap PWS-770 driver > 3G_PH8 > PH8 Connection Manager > bin to run the connectionmanager software. On Select Device, select Cinterion PH8 HSPA Wireless Ethernet Adapter. 3. Check APN Name, then enter the access point name of your network service provider on the space. In this case, “internet” is the AP name. 4. 5. Tap Connect. When connected, signal strength is shown on the lower left corner of the Connection Manager window. Note! To avoid damage to the SIM card, insert the SIM card before you turn the power on and remove the SIM card after you turn the power off. PWS-770 User Manual 28 GPS function comes optional with PWS-770. It allows you to view your GPS positions. The following illustration demonstrates how the GPS viewer operates. 1. In windows, tap Start > All Programs > u-blox > u-center > u-center to access GPS software u-center. 2. In u-center, tap Receiver > Port > COM4. Chapter 5 5.4 GPS Connection (Optional) Wireless Connections 3. Make sure Baudrate is set to 9600. Receiver > Baudrate > 9’600 29 PWS-770 User Manual 4. When satellites are detected, their positions are shown on the map. PWS-770 User Manual 30 Chapter Advanced Settings 6.1 Checking Battery Status As it is likely you will be using your PWS-770 when out and about, it is important that you monitor the battery status regularly, to ensure you do not run out of power at a critical moment. Double tap on the Power icon on the system tray to view detailed information. The battery screen appears: Balanced automatically balances performance with energy consumption. Power saver saves energy by reducing PWS-770’s performance. Note! #1 battery indicates the status of the internal battery #2 battery indicates the status of the external battery. See “External Battery” on page 68. PWS-770 User Manual 32 6.2.1 Maintaining the Battery 6.2.2 Maintaining the LCD Display Do not scratch the surface of the screen with any hard objects. Do not spray liquid directly on the screen or allow excess liquid to drip down inside the device. Do not place anything, such as food and drink, on the screen at any time to prevent damage to the screen. Clean the LCD display only with a soft cloth dampened with denatured alcohol or a proprietary LCD screen cleaner. 6.2.3 Cleaning the PWS-770 1. 2. Turn off the PWS-770 and unplug the power cord. Wipe the screen and exterior with a soft, damp cloth moistened only with water. Do not use liquid or aerosol cleaners on the screen, as these will discolor the finish and damage the screen. 33 PWS-770 User Manual Advanced Settings Do not expose to heat or attempt to disassemble the battery, and do not place the battery in water or in a fire. Do not subject the battery to strong impact, such as a blow from a hammer, or stepping on or dropping it. Do not puncture or disassemble the battery. Do not attempt to open or service the battery. Replace only with batteries designed specifically for this product. Keep the battery out of reach of children. Dispose of used batteries according to local regulations. Chapter 6 6.2 Maintenance PWS-770 User Manual 34 Appendix Specifications A.1 Specifications Feature Description Operating System Windows 7 Professional /Embedded Processor Intel Atom N2600/1.6 GHz Chipset Intel® NM10 Memory One SODIMM DDRIII 2 GB Storage Supports mSATA SSD 32 GB ~ 128 GB Display 10.4” XGA TFT LCD Touch Panel 4-wire resistive touch panel Application Button One Power button One software keyboard button One Mode button One Enter button Five Function programmable buttons for quick selection of applications Communication 802.11b/g/n WLAN built-in with integrated antenna Bluetooth class 2, 4.0 built-in with integrated antenna GPS (Optional) 3.75G WWAN (Optional) Camera 2M pixel CCD camera x 1 (default) Main Battery Rechargeable Li-ion smart battery, 1900mA, 3S1P Hot-Swap 2nd battery: External battery: 3S2P 11.1V 5000 mAh Power Adapter AC Adapter: AC 100V-240V 50/60Hz, 19V/3.42A/65W, Auto Sensing/Switching worldwide power supply I/O Port USB 2.0 x 2 Serial port RS-232 x 1 VGA port x 1 Audio in jack x 1 Audio out Jack x 1 Internal mono microphone x 1 DC-in x 1 Docking port SIM slot (with WWAN option) Audio Output 1 Watt speaker x 2 Expansion Port SD memory card x 1 (SD 2.0/SDHC) Physical 264 x 213 x 18mm Approx. 1.2 kg Environment Operating Temperature: - 0°C to 40°C (Condition: Charge) - 10°C to 50°C (Condition: discharge) Storage Temperature -20°C to 60°C Operating Humidity 5% ~ 95% Rugged Rating IP54 4ft drop Certifications FCC, CE, UL, CB, CCC, BSMI, C-tick Optional Devices / Accessories 1D / 2D Barcode Scanner 5M Camera MSR 1+2+3 track RFID 13.56M GPS Module Desk Docking Hand Strap Carry bag VESA Mount External Battery PWS-770 User Manual 36 DUT on/off AC adapter Internal in Battery Green LED Orange LED Remark Off off off System Off Off off Blinking Battery charging (Orange LED light 2 sec, dark 2 sec) Off off off Battery charge full ON Static off System ON (Battery > 30 %) ON off Blinking Battery charging (Orange LED light 2 sec, dark 2 sec) ON Static off Battery charge full ON off On Battery Low (< 30 %) ON off Blinking Battery Low (< 10 %) (Orange LED light 0.2 sec, dark 0.8 sec) A.2 Optional Accessories A.2.1 External Battery You can use an external battery to extend the power of your tablet PC. Battery specification: 5000mAh 11.1V 37 PWS-770 User Manual Appendix A Specifications LED Status A.2.1.1 Installing the External Battery 1. Remove the external battery contacts cover from the tablet PC (A). 2. Insert the contacts cover on the external battery (B). 3. 4. Align and insert the battery on the tablet PC (C). Lock to secure the battery in place (D). A.2.1.2 Removing the External Battery Repeat the above steps in reverse order to remove the battery. A.2.2 Tablet PC Docking You can use the docking stand to dock the tablet PC when you are at your home or on your office desk. When docked, you can charge both the internal and external batteries or transfer data from your tablet PC to another PC. Attach the PWS-770 to the docking stand as shown. PWS-770 User Manual 38 Note! The external battery can also be charged when installed on the tablet PC. A.2.2.1 Docking Connectors See below for the rear view of the docking and a description of all ports and connectors. No. Component Function LAN port Connect an RJ-45 cable to access LAN connection. Serial port Connect a serial cable to connect to another PC. USB ports Connect USB connectors to transfer data. DC-IN Connect the AC adapter to charge the battery. 39 PWS-770 User Manual Appendix A Specifications To charge the external battery, attach the battery to the docking stand as shown below. A.2.2.2 Connecting Power to the Docking Connect the AC power adapter to the docking and the mains as shown below. A.2.2.3 Docking Specifications Feature Description Feature Description Product Name PWS-770 desk cradle Model Number PWS-770-CRADLE00E External I/O Interfaces One LAN port One RS-232 Two USB 2.0 host connectors One DCin Power Adapter AC 100V-240V 50/60Hz, 19V/3.42A/65W Physical Size 230 x 154 x 252 mm Environment Operating Temperature -10°C to 50°C Storage Temperature -20°C to 60°C Operating Humidity 10% ~ 95% Certification CE, FCC A.2.3 Adjustable Stand You can use the adjustable stand to provide desk support when you are at home or in your office. PWS-770 User Manual 40 3. Pull to adjust the stand to desirable angle. 41 PWS-770 User Manual Appendix A Specifications A.2.3.1 Attaching the Adjustable Stand 1. Fasten four screws to attach the two stand brackets to your Tablet PC. 2. Fasten the four screws to attach the stand to the brackets. A.2.4 Handstrap and Shoulder Strap A detachable handstrap and shoulder strap are provided to carry your Tablet PC securely and safely. You can use the supplied handstrap and shoulder strap separately or together to carry the PWS-770 when you are outside your home or office. When using the handstrap and shoulder strap separately: Attach the handstrap to the rear of your tablet PC using the four short screws. Ensure the straps and the flap are securely attached. The handstrap makes it easy to carry the device on one hand. PWS-770 User Manual 42 Attach the shoulder strap to the rear of your tablet PC using two screws as shown. When using the handstrap and shoulder strap together: Attach the handstrap to the rear of your tablet PC using the four screws. Then hook the shoulder strap as shown. 43 PWS-770 User Manual Appendix A Specifications A.2.5 Vesa Mount Vesa mount can be used with a variety of alternate mounting solutions such as wall mounts. Install the vesa mount by screwing on the screws as shown. PWS-770 User Manual 44 Appendix A Specifications PWS-770 User Manual 45 Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement: The product comply with the FCC portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available. Note: The country code selection is for non-US model only and is not available to all US model. Per FCC regulation, all WiFi product marketed in US must fixed to US operation channels only.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Annotate, Fill forms Page Mode : UseOutlines XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Format : application/pdf Title : Template_V4.12_EV_User_Manual Creator : richard.ponce Create Date : 2013:03:15 10:57:33Z Creator Tool : FrameMaker 10.0.2 Metadata Date : 2013:06:14 10:41:43+08:00 Modify Date : 2013:06:14 10:41:43+08:00 Document ID : uuid:233f0145-6f2b-4056-a445-3cf87a5f1026 Instance ID : uuid:8e08de08-0a5e-48a3-af67-924d6e200019 Producer : PDF-XChange Viewer [Version: 2.0 (Build 40.7) (Nov 25 2008; 17:31:42)] Schemas Namespace URI : http://ns.adobe.com/xap/1.0/mm/ Schemas Prefix : xmpMM Schemas Schema : XMP Media Management Schema Schemas Property Category : internal Schemas Property Description : The common identifier for all versions and renditions of a document. Schemas Property Name : OriginalDocumentID Schemas Property Value Type : URI Has XFA : No Page Count : 56 Language : en Author : richard.ponceEXIF Metadata provided by EXIF.tools