Advantech Co PWS-8033M PWS-8033M User Manual V4 12 EA User Manual

Advantech Co Ltd PWS-8033M V4 12 EA User Manual

Users Manual

User ManualPWS-8033M3.7" VGA TFT LCD XScale Ultra Rugged Mobile Computer
PWS-8033M User Manual iiCopyrightThe documentation and the software included with this product are copyrighted 2009by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the rightto make improvements in the products described in this manual at any time withoutnotice. No part of this manual may be reproduced, copied, translated or transmittedin any form or by any means without the prior written permission of Advantech Co.,Ltd. Information provided in this manual is intended to be accurate and reliable. How-ever, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringe-ments of the rights of third parties, which may result from its use.AcknowledgementsIntel and Pentium are trademarks of Intel Corporation.Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp.All other product names or trademarks are properties of their respective owners.Product Warranty (2 years)Advantech warrants to you, the original purchaser, that each of its products will befree from defects in materials and workmanship for two years from the date of pur-chase. This warranty does not apply to any products which have been repaired or altered bypersons other than repair personnel authorized by Advantech, or which have beensubject to misuse, abuse, accident or improper installation. Advantech assumes noliability under the terms of this warranty as a consequence of such events.Because of Advantech’s high quality-control standards and rigorous testing, most ofour customers never need to use our repair service. If an Advantech product is defec-tive, it will be repaired or replaced at no charge during the warranty period. For out-of-warranty repairs, you will be billed according to the cost of replacement materials,service time and freight. Please consult your dealer for more details.If you think you have a defective product, follow these steps:1. Collect all the information about the problem encountered. (For example, CPU speed, Advantech products used, other hardware and software used, etc.) Note anything abnormal and list any onscreen messages you get when the problem occurs.2. Call your dealer and describe the problem. Please have your manual, product, and any helpful information readily available.3. If your product is diagnosed as defective, obtain an RMA (return merchandize authorization) number from your dealer. This allows us to process your return more quickly.4. Carefully pack the defective product, a fully-completed Repair and Replacement Order Card and a photocopy proof of purchase date (such as your sales receipt) in a shippable container. A product returned without proof of the purchase date is not eligible for warranty service.5. Write the RMA number visibly on the outside of the package and ship it prepaid to your dealer.Part No. 2003803300 Edition 1Printed in Taiwan April 2009
iii PWS-8033M User Manual Declaration of ConformityCEThis product has passed the CE test for environmental specifications when shieldedcables are used for external wiring. We recommend the use of shielded cables. Thiskind of cable is available from Advantech. Please contact your local supplier forordering information.FCC Class BNote: This equipment has been tested and found to comply with the limits for a ClassB digital device, pursuant to part 15 of the FCC Rules. These limits are designed toprovide reasonable protection against harmful interference in a residential installa-tion. This equipment generates, uses and can radiate radio frequency energy and, ifnot installed and used in accordance with the instructions, may cause harmful inter-ference to radio communications. However, there is no guarantee that interferencewill not occur in a particular installation. If this equipment does cause harmful interfer-ence to radio or television reception, which can be determined by turning the equip-ment off and on, the user is encouraged to try to correct the interference by one ormore of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.Technical Support and Assistance1. Visit the Advantech web site at www.advantech.com/support where you can find the latest information about the product.2. Contact your distributor, sales representative, or Advantech's customer service center for technical support if you need additional assistance. Please have the following information ready before you call:–Product name and serial number–Description of your peripheral attachments–Description of your software (operating system, version, application software, etc.)–A complete description of the problem–The exact wording of any error messagesWarnings, Cautions and NotesFollow these simple precautions to protect yourself from harm and the products fromdamage.To avoid electrical shock, always disconnect the power from your PC chassis before you work on it. Don't touch any components on the CPU card or other cards while the PC is on.Disconnect power before making any configuration changes. The sudden rush ofpower as you connect a jumper or install a card may damage sensitive electroniccomponents.
PWS-8033M User Manual ivSafety Instructions1. Read these safety instructions carefully.2. Keep this User Manual for later reference.3. Disconnect this equipment from any AC outlet before cleaning. Use a damp cloth. Do not use liquid or spray detergents for cleaning.4. For plug-in equipment, the power outlet socket must be located near the equip-ment and must be easily accessible.5. Keep this equipment away from humidity.6. Put this equipment on a reliable surface during installation. Dropping it or letting it fall may cause damage.7. The openings on the enclosure are for air convection. Protect the equipment from overheating. DO NOT COVER THE OPENINGS.8. Make sure the voltage of the power source is correct before connecting the equipment to the power outlet.9. Position the power cord so that people cannot step on it. Do not place anything over the power cord.10. All cautions and warnings on the equipment should be noted.11. If the equipment is not used for a long time, disconnect it from the power source to avoid damage by transient overvoltage.12. Never pour any liquid into an opening. This may cause fire or electrical shock.13. Never open the equipment. For safety reasons, the equipment should be opened only by qualified service personnel.14. If one of the following situations arises, get the equipment checked by service personnel:15. The power cord or plug is damaged.16. Liquid has penetrated into the equipment.17. The equipment has been exposed to moisture.18. The equipment does not work well, or you cannot get it to work according to the user's manual.19. The equipment has been dropped and damaged.20. The equipment has obvious signs of breakage.21. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE THE STORAGE TEMPERATURE MAY GO BELOW -20° C (-4° F) OR ABOVE 60° C (140° F). THIS COULD DAMAGE THE EQUIPMENT. THE EQUIPMENT SHOULD BE IN A CONTROLLED ENVIRONMENT.22. CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE RECOMMENDED BY THE MANUFACTURER, DISCARD USED BATTERIES ACCORDING TO THE MANUFACTURER'S INSTRUCTIONS.23. The sound pressure level at the operator's position according to IEC 704-1:1982 is no more than 70 dB (A).DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantechdisclaims all responsibility for the accuracy of any statements contained herein.
1 PWS-8033M User Manual Chapter 1 General Information ............................11.1 Introduction ............................................................................................... 21.1.1 Features & Specifications ............................................................. 21.1.2 Package Contents........................................................................ 31.1.3 Optional Accessories .................................................................... 31.2 Familiarizing Yourself with the PWS-8033M ............................................. 41.2.1 Front View..................................................................................... 41.2.2 Right View..................................................................................... 51.2.3 Bottom View.................................................................................. 61.2.4 Left View ....................................................................................... 61.2.5 Back View ..................................................................................... 71.2.6 Top View ....................................................................................... 71.3 4-In-1 Battery Charger (Optional) ............................................................. 81.4 Cradle (Optional)....................................................................................... 9Chapter 2 Installation..........................................112.1 Getting Started ........................................................................................ 122.1.1 Installing the Battery ................................................................... 122.1.2 Charging the Battery ................................................................... 122.1.3 Charging the Battery with the Adapter Charger .......................... 132.1.4 Charging the Battery with the Cradle .......................................... 132.2 Powering up for the First Time ............................................................... 142.3 Calibrating the Touchscreen ................................................................... 142.4 Setting the Time and Date ...................................................................... 142.5 Adjusting the Screen Brightness ............................................................. 14Chapter 3 Using the Hardware...........................153.1 Keypads and Function Buttons ............................................................... 163.1.1 Entering Characters with the Keypad ......................................... 163.2 Using the Stylus ...................................................................................... 163.3 Inserting a CF Card................................................................................. 173.4 Removing a CF Card .............................................................................. 173.5 Inserting an Micro SD Memory Card....................................................... 173.6 Removing a Storage Card....................................................................... 183.7 GPRS SIM Card Set Up.......................................................................... 183.8 Connecting Devices to the PWS-8033M................................................. 183.8.1 Connecting USB ......................................................................... 183.8.2 Connecting a Serial Device......................................................... 193.8.3 Connection to a LAN................................................................... 203.8.4 Connecting Headphones and a Microphone............................... 203.8.5 Connecting to the Cradle (Optional) ........................................... 20Chapter 4 Getting Connected ............................214.1 Installing Microsoft ActiveSync................................................................ 224.1.1 Connecting to Your Computer .................................................... 224.2 Connecting with Bluetooth ...................................................................... 244.3 Connecting to a WLAN (Wi-Fi)................................................................ 254.3.1 Add a New Network .................................................................... 264.3.2 Connecting to an Existing Network ............................................. 264.3.3 Changing the Advanced Settings................................................ 274.3.4 View Wireless Networking Log Information ................................ 284.4 Connecting GPS ..................................................................................... 294.5 Connecting GPRS................................................................................... 30
PWS-8033M User Manual 2Chapter 5 Advanced Settings............................ 335.1 Checking the Battery Status ................................................................... 345.2 Optimizing Battery Life............................................................................ 345.2.1 Changing the Automatic Power Settings .................................... 345.2.2 Adjusting Backlight Settings ....................................................... 355.3 Performing a System Reset .................................................................... 355.4 Changing the Screen Resolution ............................................................ 365.5 Rotate Screen ......................................................................................... 37
Chapter 11General Information
PWS-8033M User Manual 21.1 IntroductionThe PWS-8033M is an ultra rugged computer designed to military standards. Thedesign incorporates the powerful Intel PXA270 624MHz CPU with Microsoft WindowsCE 5.0/Mobile 6.1 operating system. The PWS-8033M provides the highestperformance and reliability whilst minimizing the Total Cost of Ownership (TCO). ThePWS-8033M incorporates a transflective LCD with touch-screen, keypad, Wifi, andBluetooth communication capability. Currently available options include HSDPA(3.5G), and GPS. To minimize the Total Cost of Ownership the PWS-8033M is sealedto meet IP67 standards and complies with IEC 68-2-32 5 foot drop to concrete.1.1.1 Features & SpecificationsThe PWS-8033M is a smart configurable handheld terminal which has beendesigned to meet the requirements of a wide range of applications including:• Military & Law Enforcement• Industrial & Manufacturing• Emergency services and constructionPWS-8033M been developed to comply with MIL-STD-461E, MIL-STD-810F andIP67 standards, the main specifications are as detailed below.PWS-8033M Military PDA SpecificationsItems DescriptionOS Windows Mobile 6.1 / Windows CE 5.0 CPU Intel PXA270 624MHzMemory 256MB SDRAM on board 256MB/512MB Flash ROM on boardDisplay 3.7” transflective TFT LCD, VGA resolution (640 X 480)/QVGA resolution (320 X 240)Touchscreen 4-wire Resistive touch screenAudio System AC-97, Internal microphone and one speaker (stereo supported via ear-phone jack)Application ButtonsOne power on/suspend buttonOne software reset switchNavigation Key+ Function Key (4 function keys in front)One HW reset key located right side doorOne Button for backlight on/off (using power on/ suspend button)C o m m u n i c a t i o n 8 0 2 . 1 1 b / g W L A N m o d u l e b u i l t - i n w i t h i n t e g r a l a n t e n n a B l u e t o o t h c l a s s 2 , v 1 . 2 b u i l t - i n w i t h i n t e g r a l a n t e n n a GPS & GALILEO receiver module with antenna built-in (Option)GSM/GPRS/WCDMA/HSDPA(3.5G) internal module (for data transmission only) (Option)Status Indicator Power LED (two color LED x1) (at right side) LED on the upper side for lighting usageOne LED for GPRS (wireless connection) (at left side)
3 PWS-8033M User ManualChapter 1 General Information1.1.2 Package ContentsThe standard PWS-8033M includes the following items:PWS-8033M PDA unitPower cord & adapterBatteryStylus & string1.1.3 Optional AccessoriesIn addition the following optional accessories may be included:• Sleeve with hand strap & shoulder strap• Cradle• Vehicle Mount• 4 IN 1 Battery ChargerPlease carefully check the delivery documents to ensure that all items are present.In the unlikely event of a discrepancy please contact your supplier.I/O Ports Two USB type A connectors, USB1.1 Host (** Two USB Type A at Left Side)One USB mini type B connector, USB1.1 Slave (at Right Side Door)One RS-232(full)One RS-232/422/485 (OPTION)One RJ-45 for 10/100M ethernet (USB type)One CF slotOne stereo headphone jack One microphone jack One DC-In connector (At the right side)One MicroSD Slot Main Battery Rechargeable Li-ion smart battery, 7.4V, 1880mAh, 2S1P, 59X38X25mmPower Adapter Universal AC 90V ~ 265V, 47~63Hz input, 12V, 3.5A output.Physical 155 x 96 x 42mm , 650gEnvironment Operating Temperature: -20 to +60CStorage Temperature -40 to +70C Charging Temperature 0 to +50C Operating Humidity 5% ~ 95% none condensing Rugged SpecificationsIP675 ft drop to concreteMIL-STD-810FMIL-STD-461ECertification CE, FCC Accessories 1. Case: standard nylon (waterproof) case with belt loop; 2. Mount: Vehicle mount (using RAM mount)3. elastic hand strap: prevent accidental drop4. Stylus with tether kit5. Power: DC-Adapter & power cord 12V Vehicle charger with 12V cable (option)6. Cradle: 1 x RS-232, 2 x USB (1x Type A; 1xTypeB), 1 x DC-in7. External Military Connector Box: converting 2 XRS-232 and 2 XUSB to one military connector8. 4-IN-1 battery charger
PWS-8033M User Manual 41.2 Familiarizing Yourself with the PWS-8033MThe following sections describe the main components and features of the PWS-8033M.1.2.1 Front ViewItem Description LCD touch screen Displays the applications and data stored the PWS-8033M. It is a touch-sensitive screen and can be operated using the stylus or fin-ger.Navigation Keys Press these keys to navigate in the PWS-8033M interface. Function Keys Programmable keypad interface for controlling the PWS-8033M.Power button If the device is off, press this button to turn it on. When the unit is on, press this button for 3 seconds to turn the PWS-8033M off. Power LED Indicates the battery charging power status. Green -Battery is fully charged or the device is running on battery power. When LED flashes, the battery charge is at 13%. The battery should be recharged immediately.
5 PWS-8033M User ManualChapter 1 General Information1.2.2 Right View Item Description RJ45 Port Connects to the LAN.SW Reset Switch Press the end of the stylus into the button to reset the PWS-8033M. A reset allows your device to get a fresh start, similar to warm rebooting a computer.Earphone Plug Connects to audio line-out devices (earphones or headphones) for use in noisy environments. Microphone Plug Enables the recording of voice using an external microphoneUSB mini type B port USB mini type B port (client).Micro SD Slot Accommodates Micro Secure Digital memory cards.HW Reset Switch Press the end of the stylus into the button to reset PWS-8033M.DC IN Jack Connect the AC adapter to this jack to supply power to charge the PWS-8033M battery.
PWS-8033M User Manual 61.2.3 Bottom View1.2.4 Left ViewItem Description Cradle connector Connects the PWS-8033M to cradle, enabling battery charging also connects RS232, USBA and USB mini B).Battery Cover Latch Unlock the latch to open the battery compartment cover, to place or remove battery.Item Description RS 232 Serial Port Connects using a mini 9 way D type connector for this port for serial communications.USB type A port Connects to USB type A port (host) to this port.
7 PWS-8033M User ManualChapter 1 General Information1.2.5 Back View1.2.6 Top ViewItem Description Stylus Enables you to interact with the operating system. Remove the stylus from the holder and hold and use it the same way you would a pen or pencil. For use with the touch screen..Battery Compartment Houses the removable and rechargeable battery pack.Item Description CF Card Slot Additional functionality can be provided by using Compact Flash cards.SIM Card Slot Additional functionality can be provided by using SIM cards. Only with WAN module included.
PWS-8033M User Manual 81.3 4-In-1 Battery Charger (Optional) Item Description Battery Pack Holder Lock Battery pack into position for Battery charging. DC IN Jack Connect the AC adapter to this jack to supply power to the charger and charge the PWS-8033M Battery. *Status LED Indicates that power and the PWS-8033M battery is charging. RED light -Battery is charging. No Light – No battery fitted.RED light Flash once – Power Adaptor connected, and ready for charging battery. Warning! Both Battery charger adaptor and PWS-8033M power adaptor are the same, but they can NOT be interchanged with other adaptor.
9 PWS-8033M User ManualChapter 1 General Information1.4 Cradle (Optional) Item Description Back Plate Supports the PWS-8033M into charging positionRS 232 Serial Port Connects a serial cable.USB type A port (host)Connects a USB type A (host) cable.Cradle connector Connects the PWS-8033M to the cradle, Provides connections for RS232, USB type A and mini USB type B.USB mini type B port (client)Connects a USB mini type B (client) cable.DC IN Jack Connects the AC adapter to provide power for the cradle*Status LED Indicates that power and the PWS-8033M is charged. Green light –PWS-8033M is charging, and connected.No Light –No PWS-8033M fitted for charging.
PWS-8033M User Manual 10
Chapter 22Installation
PWS-8033M User Manual 122.1 Getting StartedThis chapter explains how to install and charge the battery, how to check the batterystatus, how to turn on the PWS-8033M, and how to calibrate the screen.2.1.1 Installing the BatteryDispose of used batteries according to local recycling guidelines in your area. Abackup battery cell is embedded into your device to prevent data loss in instanceswhen the removable battery pack is removed or completely discharged. This backupbattery cell will only support the system for a maximum of 3 minutes.1. Remove the battery compartment cover.2. Align the battery contacts with the contacts in the compartment and place the battery in the compartment.3. Replace the battery compartment cover, and lock the battery latch. 2.1.2 Charging the BatteryBefore using the PWS-8033M for the first time it will need charging for about 3 hours.The PWS-8033M can be charged using the power adaptor or the Cradle. Warning! There is a risk of fire and burns if the battery pack is handled improperly. DO NOT disassemble, crush, puncture, short external contacts, or dis-pose the battery pack in fire or water. DO NOT attempt to open or ser-vice the battery pack. Status Charging ReadyPower OFF Amber flashing light Amber lightPower ON Amber flashing with Green light Amber lightNote! When the battery power is below 10%, the PWS-8033M will enter sus-pend mode.
13 PWS-8033M User ManualChapter 2 Installation2.1.3 Charging the Battery with the Adapter Charger1. Open the side door on the right bottom of the PWS-8033M.2. Plug the adapter charger (B) into the side door (A).3. Plug the power cord into the AC adapter. 4. Plug the AC adapter into an electrical outlet.2.1.4 Charging the Battery with the Cradle1. Slide the PWS-8033M into the cradle until it clicks into place.2. Plug the AC adapter cable into the power connector on the cradle (A).3. Plug the power cable connector into the AC adapter (B), Plug the AC adapter into an electrical outlet (C).
PWS-8033M User Manual 142.2 Powering up for the First TimeAfter you have charged the PWS-8033M for about 3 hours the device is ready to beused. You can now start up the PWS-8033M when you can calibrate the touchscreen, practice with the stylus and set the date, time and zone. Turn on your deviceby pressing the power button on the front panel.2.3 Calibrating the TouchscreenThe calibration screen automatically appears when the unit is powered on for the firsttime or after the system is reset.1. Tap the center cross hair firmly and accurately with the stylus. The cross hair moves to the next location.2. Follow the cross hair and continue tapping until the screen has been calibrated.3. After calibration is finished, press the Enter key to save the settings or press Esc to revert to the previous settings.2.4 Setting the Time and Date1. Tap Start Settings Control Panel.2. Double-tap Date/Time.3. Tap the arrows next to the month to select the correct month.4. Select a field in the time box and tap the arrows next to the time to change the value of the field.5. Tap the drop-down arrow next to Time Zone to select the correct time zone for your area.6. Check the box next to Automatically adjust... to have the OS automatically update the time for daylight saving.7. Tag Apply to save the settings.2.5 Adjusting the Screen Brightness1. Tap Start Settings Control Panel.2. Double-tap OEMs Utility.3. Click the Display Manager tab.4. Under Backlight Control, click the Dark arrow to make the screen darker, or click the Bright arrow to make the screen brighter.5. Click OK to save and exit the utility.Note! To recalibrate the screen at any time, tap Start Settings Control Panel. Then double-tap Stylus. Tap the Calibration tab, and tap Recalibrate.
Chapter 33Using the Hardware
PWS-8033M User Manual 163.1 Keypads and Function ButtonsThe keypad enables you to both enter information and interact with the PWS-8033Moperating system.3.1.1 Entering Characters with the KeypadThe operating system has an onscreen keyboard that enables you to enter alphanu-meric characters with the stylus. Press the input panel icon in the system tray toview the input panel menu. Tap Keyboard to view the onscreen keyboard.Tap Hide Input Panel to close the keyboard.The keyboard emulates a standard computer keyboard. Tap the onscreen keyboardto enter, edit, and delete text.3.2 Using the StylusCAUTION! Never use anything other than the PWS-8033M stylus on the screen.Using another object as a stylus could cause permanent damage. You can use yourfinger to interact with the screen as well.1. Remove the stylus from its holder.2. Hold the stylus as you would a pencil.3. To make a selection from a menu, lightly tap the tip of the stylus on that item.Adjusting the Double-Tap RateSet the stylus double-tap rate as follows.1. Tap Start Settings Control Panel.2. Double-tap Stylus.3. Tap the Double-Tap tab.4. Double-tap on the checkerboard graphic to set your double tap rate.
17 PWS-8033M User ManualChapter 3 Using the Hardware3.3 Inserting a CF CardThe PWS-8033M accommodates a CF card. You can to the functionality of the PWS-8033M by installing a CF memory card Perform the following steps to insert a CF card into the PWS-8033M:1. Unscrew the two hand screws securing the CF cover.2. Insert the CF card into the slot as shown, until the contacts are properly seated in the CF connector.3. Replace the cover.3.4 Removing a CF Card1. Press the black CF button next to the slot. The button pops out.2. Press the button again to push the CF card out.3.5 Inserting an Micro SD Memory CardThe PWS-8033M has a SD card slot compatible with a wide range of Micro SD cards,which are primarily used to back up or transfer files and data. The slot also supportsHCSD cards.To insert a Micro SD card into the Micro SD slot.1. Open the right centre door.2. Insert the Micro SD card with the notched corner as oriented as shown below3. Press the card into the slot. The card is secure when it is flush with the slot.4. Close and lock the door.
PWS-8033M User Manual 183.6 Removing a Storage Card1. Open the right centre door.2. Press the card in and release. The card pops out.3. Remove the card from the slot.4. Close and lock the door.3.7 GPRS SIM Card Set Up1. Remove the two hand screws on the top of the PWS-8033M.2. Insert the SIM Card into the SIM Card slot as shown.3. Push the card into the slot. The card is secure when it is flush with the slot. 3.8 Connecting Devices to the PWS-8033MThis section describes how to connect devices to the PWS-8033M. Connection canbe made directly to the PWS-8033M or using the cradle.3.8.1 Connecting USBThe PWS-8033M can accommodate both USB Type A and USB mini Type B.Connecting a USB Type AThe illustration below shows how to connect a USB type A device to the PWS-8033M. The connector can only go in one way. If it does not go in smoothly, check theorientation and try again.Note! The battery must be removed before SIM card can be fitted.
19 PWS-8033M User ManualChapter 3 Using the HardwareConnecting a MINI USB Type BThe illustration below shows how to connect a mini USB type B cable to the PWS-8033M. The connector is keyed to only go in one way. If it does not go in smoothly,check the orientation and try again.3.8.2 Connecting a Serial DeviceConnect a serial device to the PWS-8033M to perform serial communications.Please see below illustration
PWS-8033M User Manual 203.8.3 Connection to a LANThe PWS-8033M is connected using a RJ-45 connector. See below:3.8.4 Connecting Headphones and a MicrophoneThe PWS-8033M utilizes an external microphone and speaker. A headset and micro-phone can be used in noisy environments. See the illustration above.3.8.5 Connecting to the Cradle (Optional)The cradle allows for charging the batteries as well as connecting USB and serialdevicesConnecting USBThere is one USB Type A connector on the back which supports both USB keyboardand mouse. In addition there is one Mini Type B USB port next to the Type A USBconnector. Connecting a Serial CableA serial cable can be connected thePWS-8033M cradle.
Chapter 44Getting Connected
PWS-8033M User Manual 224.1 Installing Microsoft ActiveSyncIn order to exchange data between your computer and the PWS-8033M and installextra applications or utilities to the PWS-8033M, Microsoft ActiveSync must beinstalled on your computer. Connect the PWS-8033M to a PC using a USB type Bcable. Download the latest version of Microsoft ActiveSync from the Microsoft web-site.4.1.1 Connecting to Your Computer1. After ActiveSync has been installed, connect the USB B cable to the USB port on your PWS-8033M. 2. Plug the other end of the USB cable into a USB port on your computer.3. Turn the device on.4. ActiveSync starts automatically and configure the USB port to work with the PWS-8033M. The New Partnership setup wizard will automatically start.5. Follow the onscreen instructions.Note! If you have a previous version of the Microsoft ActiveSync installed in your computer, uninstall it first before installing the latest version of Microsoft ActiveSync.Note! If ActiveSync doesn't start automatically, click Start Programs Microsoft ActiveSync. If a message appears indicating that it is unable to detect a connection, click the Cancel button and manually configure the commu-nication settings.
23 PWS-8033M User ManualChapter 4 Getting Connected 6. When the configuration process is complete, the ActiveSync window appears.7. Synchronization will be initialized and will take place if you’ve chosen to syn-chronize periodically or upon connection. 8. ActiveSync detects the PWS-8033M and establishes a connection.9. Click No, and then click Next.
PWS-8033M User Manual 244.2 Connecting with BluetoothYour device is equipped with Bluetooth technology that you can use to synchronizeinformation with a computer equipped with a Bluetooth adapter or access point. Blue-tooth wireless technology allows you to communicate with the computer whenever itis within range. Follow these instructions to set up a Bluetooth connection.1. Start>Settings>Control Panel and double-tap Bluetooth Device Properties2. Tap Scan Device. Bluetooth Manager scans for local Bluetooth devices and dis-plays a list of all Bluetooth enabled devices within range.3. Double tap a device in the list to display a context menu.4. Tap Trusted to add the device to the trusted Bluetooth devices list.You are prompted to authenticate the device. If you want to authenticate the devicenow, go to step 5. Otherwise, go to step 7.
25 PWS-8033M User ManualChapter 4 Getting Connected5. Tap Yes to authenticate the device. You are prompted for the device’s pin code. Enabling trusted devices to the Bluetooth manager’s list. You can mark the device as trusted without authenticating the device by tapping No when prompted to authenticate the device.6. Enter the pin code and tap OK to authenticate the device. Tap No to cancel authentication.The additional options are described as follows:Trusted: tap to add or remove the device from the trusted device list. When checked,the red X on the key next to the device is removed.Active: tap to make the device active or inactive.Authenticate: tap to authenticate the device and add the device to the trusteddevices list.Encrypt: tap to enable or disable encryption of data transferred between the PWS-8033M and a Bluetooth device.Delete: Deletes the device from the Bluetooth Manager list4.3 Connecting to a WLAN (Wi-Fi)Through a WiFi (wireless) connection you can add a new network, connect to anexisting network, change the advanced wireless settings and view wireless network-ing log information. To establish a WiFi connection, follow the steps below:1. Start from “PwrCtrl”, and chose WLAN “ON”. Then, Click on the WIFI icon.2. Select the Wireless Information tab to display the available optionsNote! If you enter the wrong pin code, an authentication fail message appears. The red X disappears on the entry's key icon, and the context menu's additional options become available.
PWS-8033M User Manual 264.3.1 Add a New Network1. To add a new network, double-click Add New.2. When the following screen displays, input the required parameters as explained inthe following table:Click OK to connect.4.3.2 Connecting to an Existing Network1. Select a network from the list and press Connect or right-click for more options.2. Click OK to connect.
27 PWS-8033M User ManualChapter 4 Getting Connected4.3.3 Changing the Advanced Settings1. Tap the Advanced button to display the advanced wireless settings (the pre-ferred networks will be listed and preference is given to networks at the top of the list).2. To move a network up or down in priority, tap the Up or Down buttons.3. To delete a network from the list, tap the Delete button.
PWS-8033M User Manual 284. To automatically connect to non-preferred networks, click the box.5. To select which networks to access, tap the drop down menu and choose the required option.4.3.4 View Wireless Networking Log InformationTap the Log button to display the log information.
29 PWS-8033M User ManualChapter 4 Getting Connected4.4 Connecting GPSGPS functions come optional with PWS-8033M. Different countries have differentGPS positioning programs and users can download from a variety GPS positioningprograms to install into this unit. The following illustration demonstrates how the GPSviewer operates.1. Start from “PwrCtrl”, and chose GPS “ON”2. Run the GPS Viewer program (download available from the Internet).3. Click COM2. and Baudrate 9600. Then, OPEN GPS to start the “GPS”.4. When GPS is active, click GPS status to display the satellite status. 5. Allow approximately 60 seconds for GPS longitude and latitude display.
PWS-8033M User Manual 304.5 Connecting GPRS1. Start from “PwrCtrl”, and chose GPRS “ON” 2. Chose Start>Settings>Control Panel>Network and Dial-up connections 3. Tap Make New Connection>Dial-Up Connection>HSDPA Siemens HC25> Configure 4. Set>Baud Rate>115200, then chose>Call Options>to set up APN5. Input AT Command>+cgdcont=1,"ip","internet"> and>Phone Number>input. Then, CLICK OK.
31 PWS-8033M User ManualChapter 4 Getting Connected6. Click Control Panel then Network and Dial-upConncetions.7. Click>Dial Properties>and>Dialing Patterns. Then, place "G" into each blank as follows:8. Connection is successful when the Status screen displays Connected.
PWS-8033M User Manual 32
Chapter 55Advanced Settings
PWS-8033M User Manual 345.1 Checking the Battery StatusThis section describes how to view the power level for the main and backup batteryand how to set power saving options. To check the main and backup battery status:1. Open Power Properties. Tap Start Settings Control Panel. Then double-tap Power. 2. The battery menu item displays the status of the main and backup batteries.5.2 Optimizing Battery LifeYou can extend the PWS-8033M battery life by doing either of the following:• Change the automatic power settings• Minimize the use of the backlight5.2.1 Changing the Automatic Power SettingsTo change the automatic power settings:1. In the Power Properties screen tap the Schemes tab.2. Tap the arrow next to the Power Scheme and select Battery Power.3. Tap the arrows next to the following three power saving scenarios and select the desired time out for each item.Switch state to UserIdle: PWS-8033M enters power saving mode when there is no user input after theselected timeout. The backlight brightness is reduced. The backlight resumes normalbrightness when the LCD is Touched.Switch state to System Idle: PWS-8033M enters power saving mode when there isno system activity after the selected timeout. The backlight is turned off. The back-light turns on when the LCD is touched.Switch state to Suspend: PWS-8033M enters suspend mode when there is no userinput or system activity after the selected timeout.Time out values range from Never, and 4/5/10/30 minutes.Note! It is necessary to charge the battery when the battery charge reaches below 13%. If the battery does not accept a charge, contact Technical Support.
35 PWS-8033M User ManualChapter 5 Advanced Settings5.2.2 Adjusting Backlight SettingsThe power consumption of the LCD backlight may be high, turn off the backlightfunction if it is not necessary. If a backlight is required, set “automatically turn off thebacklight” function.To change backlight settings:1. Tap Start Settings Control Panel.2. Tap OEMs Utility.3. Select Display Manager, and tap the arrow next to Dark or drag the slider to the left to reduce the screen brightness.5.3 Performing a System ResetYou may need to perform a reset if the device freezes (i.e., device no longerresponds to the buttons on the screen). A reset allows your device to get a freshstart, similar to rebooting a computer. This will restart your device and adjust memoryallocation. All records and entries are retained after a reset. Unsaved data in openprograms may in some cases be lost.Performing a Software reset (re-boot)1. Remove the stylus from its holder.2. Lightly press the tip of the stylus to the reset button located on the PWS-8033M.
PWS-8033M User Manual 365.4 Changing the Screen ResolutionIt may be necessary to change the screen resolution from VGA to QVGA, or fromQVGA to VGA.1. Start -> PROGRAM-> Utilizes-> DispSet 2. Wait for the PWS-8033M Re-start.
37 PWS-8033M User ManualChapter 5 Advanced Settings5.5 Rotate ScreenIt may be necessary to rotate the screen display from standard throught either 90,180 or 270 degrees.1. Start -> PROGRAM-> Utilizes-> DispSet 2. Select the angle of rotation.
PWS-8033M User Manual 38

Navigation menu