Advantech Co TPC130WL Wireless Module User Manual V4 12 EV User Manual
Advantech Co Ltd Wireless Module V4 12 EV User Manual
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2639646 |
| Application ID | uc3j5hU0uZLWuqB3y9O1UQ== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 179.86kB (2248286 bits) |
| Date Submitted | 2015-06-08 00:00:00 |
| Date Available | 2015-12-05 00:00:00 |
| Creation Date | 2017-09-30 04:25:10 |
| Producing Software | GPL Ghostscript 9.18 |
| Document Lastmod | 2017-09-30 04:25:10 |
| Document Title | Template_V4.12_EV_User_Manual |
| Document Creator | FrameMaker 10.0.2 |
| Document Author: | chunxia.zhao |
User Manual PWS-870 Fully-Rugged Tablet PC Copyright The documentation and the software included with this product are copyrighted 2015 by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements in the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable. However, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringements of the rights of third parties, which may result from its use. Acknowledgements All other product names or trademarks are properties of their respective owners. PWS-870 User Manual Part No. 2008087000 Edition 1 Printed in Taiwan February 2015 ii Technical Support and Assistance 1. 2. Visit the Advantech website at http://support.advantech.com where you can find the latest information about the product. Contact your distributor, sales representative, or Advantech's customer service center for technical support if you need additional assistance. Please have the following information ready before you call: – Product name and serial number – Description of your peripheral attachments – Description of your software (operating system, version, application software, etc.) – A complete description of the problem – The exact wording of any error messages Safety Instructions Use the following safety guidelines to help protect yourself and PWS-870. Do not attempt to service the PWS-870 yourself. Always follow installation instructions closely. Be sure that nothing rests on the AC adapter's power cable and that the cable is not located where it can be tripped over or stepped on. Do not cover the AC adaptor with papers or other items that will reduce cooling; also, do not use the AC adapter while it is inside a carrying case. Use only the AC adapter, power cord, and batteries that are approved for use with this PWS-870. Use of another type of battery or AC adapter may cause risk of fire or explosion. If you use an extension cable with the AC adapter, ensure that the total ampere rating of the products plugged in to the extension cable does not exceed the ampere rating of the extension cable. When you move the PWS-870 between environments with very different temperature and/or humidity ranges, condensation may form on or within the PWS870. To avoid damaging the PWS-870, allow sufficient time for the moisture to evaporate before using the PWS-870. When you disconnect a cable, pull on its connector or on its strain relief loop, not on the cable itself. As you pull out the connector, keep it evenly aligned to avoid bending any connector pins. Also, before you connect a cable make sure both connectors are correctly oriented and aligned. PWS-870 User Manual iv Battery Safety RTC Battery Caution RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. Do not place the battery incorrectly as this may cause danger of explosion. Dispose of used batteries according to the manufacturer's instructions. Do not dispose of batteries in a fire. They may explode. Check with local authorities for disposal instructions. Battery Pack Caution The battery used in this device may present a risk of fire or chemical burn if mistreated. Do not disassemble, heat above 50 °C (in battery discharging condition), or incinerate. Replace internal battery with Li-ion 14.4V 2370mAh and Cell SANYO only. Use of another battery may present a risk of fire or explosion. Dispose of used batteries according to local disposal regulations. Keep away from children. Do not disassemble and do not dispose of in a fire. Battery Charge Notice It is important to consider the environment temperature whenever you are charging the Lithium-Ion battery pack. The process is more efficient at normal room temperature or slightly cooler. It is essential that you charge batteries within the stated range of 0°C to 40°C. Charging batteries outside of the specified range could damage the batteries and shorten their charging life cycle. Storage and Safety Notice Although charge Lithium-Ion batteries may be left unused for several months, their capacity may be depleted due to the build up of internal resistance. If this happens they will require recharging prior to use. Lithium-Ion batteries may be stored at temperatures between -20°C to 60°C, however they may be depleted more rapidly at the high end of this range. It is recommended to store batteries within normal room temperature ranges. PWS-870 User Manual PWS-870 User Manual vi Contents Chapter Chapter Chapter Rugged and Ready to Go....................1 1.1 1.2 1.3 1.4 1.5 1.6 Symbols Used in this Manual.................................................................... 2 Product Features....................................................................................... 2 Package Contents..................................................................................... 2 Optional Accessories ................................................................................ 3 Optional Modules ...................................................................................... 3 Exploring the PWS-870............................................................................. 3 1.6.1 Front View..................................................................................... 3 1.6.2 Rear View ..................................................................................... 4 1.6.3 Side Views .................................................................................... 5 1.6.4 Top View ....................................................................................... 5 1.6.5 Bottom View.................................................................................. 6 Getting Started & Making Connections 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 Inserting a Memory Card........................................................................... 8 Removing a Memory Card ........................................................................ 8 Installing a SIM.......................................................................................... 8 Using the Tether........................................................................................ 9 Connecting the Power............................................................................... 9 Connecting to a Monitor ............................................................................ 9 Connecting USB Devices........................................................................ 10 Connecting Headphones/ Microphone.................................................... 10 Turning On & Controlling the PWS-870 11 3.1 3.2 Turning on ............................................................................................... 12 Controlling the PWS-870......................................................................... 12 3.2.1 Using the Touch Screen ............................................................. 12 3.2.2 Using the Tap Function............................................................... 12 3.2.3 Using the Buttons........................................................................ 12 3.2.4 Using the On-Screen Keyboard .................................................. 13 Making WiFi Connection ......................................................................... 14 Making Bluetooth Connections ............................................................... 16 3.4.1 Setting Up Bluetooth ................................................................... 16 3.3 3.4 Chapter Chapter Using Advantech Control Center .....21 4.1 4.2 4.3 4.4 4.5 Advantech Control Center for PWS-870 ................................................. 22 System Information ................................................................................. 22 System Control........................................................................................ 23 Module Control........................................................................................ 28 Utility ....................................................................................................... 34 Maintenance .......................................45 5.1 Maintaining the Battery ........................................................................... 46 vii PWS-870 User Manual 5.2 5.3 Maintaining the LCD Display................................................................... 46 Cleaning the PWS-870 ........................................................................... 46 Appendix A Specifications.................................... 47 A.1 A.2 Specifications.......................................................................................... 48 LED Status.............................................................................................. 49 Table A.1: Power LED ............................................................... 49 Table A.2: Battery LED .............................................................. 49 Table A.3: NFC LED .................................................................. 50 COM Port Setting.................................................................................... 50 Table A.4: COM Port Setting ..................................................... 50 A.3 PWS-870 User Manual viii Chapter Rugged and Ready to Go Congratulations on your purchase of the PWS-870 Fully Rugged Tablet PC. This product combines rugged design with reliable performance and powerful functionality to best suit all your needs, in a wide range of working conditions. This user manual outlines all you need to know to set up and use your PWS-870. If you have any further questions or queries, contact our technical support team via our website: http://www.advantech.com.tw/ 1.1 Symbols Used in this Manual Warning! Denotes information that must be observed. Failure to do so may result in personal harm or damage to the product. Note! Denotes information that must be observed. Failure to do so may result in personal harm or damage to the product. 1.2 Product Features High-performance 4th Gen. Intel® core i processor Built-in WLAN/Bluetooth/GPS/WWAN/NFC functions Durable, shock-resistant design IP65 sealing & built to withstand a 4 ft drop 10.1" Sunlight option / HD LCD I/O ports for expansion Long battery life 1.3 Package Contents Ensure all the following items are present when you receive your PWS-870. If any of these items are missing, contact your vendor immediately. Note! Screens used in this manual are for illustrative purposes only. Actual screens may vary depending on your product version. PWS-870 Tablet PC AC power adaptor Capacitive pen Tether PWS-870 User Manual Chapter 1 1.4 Optional Accessories Desk docking station Vehicle docking station External battery Universal cover Car adapter Vesa mount 1D / 2D barcode scanner NFC RFID Reader LTE WWAN GPS module Fingerprint 1.6 Exploring the PWS-870 1.6.1 Front View No. Component 2M Front Camera Home Key (Programmable) Function Key (Programmable) Speakers Fingerprint (Optional) PWS-870 User Manual Rugged and Ready to Go 1.5 Optional Modules 1.6.2 Rear View 10 11 12 No. Component 5M AF Camera with Flash Light FAN NFC RFID Reader (Optional) Capacitive Pen 10 Latch (For External Battery & SIM Card Slot) 11 SIM Card Slot 12 Connector for External Battery PWS-870 User Manual 7 10 No. Component Kensington Lock Power Button Audio Combo Jack HDMI Connector (1.4) USB Connector (USB 3.0) DC-in Screw Holes for Extension Module USB Connector (USB 3.0) USB Connector (USB 2.0) 10 SD Card Slot (SDXC) 1.6.4 Top View No. Component D-Ring for Shoulder Belt Vent of Fan 1D or 2D Barcode Scanner (Optional) PWS-870 User Manual Rugged and Ready to Go Chapter 1 1.6.3 Side Views 1.6.5 Bottom View No. Component Docking connector PWS-870 User Manual Chapter Getting Started & Making Connections 2.1 Inserting a Memory Card You can insert an SD card to store data, which needs to be later transferred to another machine, or to simply expand the storage capacity of the PWS-870. 1. Open the SD card compartment cover. 2. 3. Insert the SD card with the metal contacts facing upwards, until it clicks into place. Close the memory card compartment cover. 2.2 Removing a Memory Card 1. 2. 3. Open the SD card compartment cover. Press the SD card inwards to eject it from the slot. Remove the card and close the SD card compartment cover. 2.3 Installing a SIM 1. 2. 3. 4. 5. Make sure the system is turned off. Unlock the battery latch and remove the cover Push and open the SIM card cover. Put the SIM card into the slot, with the metallic part facing down until it clicks into place. Close the SIM card cover and push back the SIM card cover. Close the cover and lock the battery latch. PWS-870 User Manual 1. 2. 3. Insert one of the tether's loop end through the hole of the capacitive pen. Insert the other end through the first loop and pull it tight. Insert the other loop end to either D-ring of PWS-870. Insert the capacitive pen through the loop and pull it tight Chapter 2 2.4 Using the Tether 2.5 Connecting the Power 2.6 Connecting to a Monitor You can connect the PWS-870 to an external monitor for enhanced viewing. Connect one end of an HDMI cable to the HDMI port on the left side of the PWS-870. Connect the other end to the HDMI port on the monitor. PWS-870 User Manual Getting Started & Making Connections Before you can use your PWS-870, you must fully charge the battery. Connect the power adapter as shown and leave to charge for: A minimum of 2 hours when using the internal battery A minimum of 5 hours when a second battery is installed 2.7 Connecting USB Devices You can connect peripheral devices, such as a USB keyboard and mouse, as well as other wireless devices using the USB ports on the PWS-870. PWS-870 has one USB 3.0 port on the both sides and one USB 2.0 port on the left side. 2.8 Connecting Headphones/ Microphone You can connect a pair of headphones or microphone using the audio combo jack on the left side of the PWS-870. Note! PWS-870 uses audio combo jack therefore for microphone, PWS-870 only supports TRRS type. For headphones, both TRRS and TRS types can be supported. PWS-870 User Manual 10 Chapter Turning On & Controlling the PWS870 3.1 Turning on 1. Press and hold the power button to turn on the PWS-870. 3.2 Controlling the PWS-870 3.2.1 Using the Touch Screen The PWS-870 is equipped with touch screen technology, for ease of use when you are on the go. Simply tap the screen with your finger to select icons and run applications. 3.2.2 Using the Tap Function When you tap on the screen with the a pen or stylus, it emulates click functions of a regular mouse. To emulate a left click, single tap the screen once. To emulate a right click, tap and hold the screen. To emulate a double click, tap the screen twice. 3.2.3 Using the Buttons There are two buttons on the front side of PWS-870. The button in the left side of panel is Home key. The other button in the right side of panel is for Barcode key (only suitable for the models equipped with barcode options) The Home and Barcode buttons can be configured as shortcuts to access your favorite or frequently used programs. Please refer to Chapter 4.4 for more detail settings. Button PWS-870 User Manual Name Function Home Press to return Home Barcode Press to trigger barcode. 12 Chapter 3 3.2.4 Using the On-Screen Keyboard Tap keyboard icon to bring up the on-screen keyboard. Turning On & Controlling the PWS-870 Use your finger to tap and enter letters, numbers and symbols as you would with a regular keyboard. 13 PWS-870 User Manual 3.3 Making WiFi Connection Note! WiFi access requires a separate purchase of a service contract with a wireless service provider. Contact a wireless service provider for more information. The PWS-870 comes pre-loaded with WLAN module, you can send and receive signals to a WiFi network then synchronize files. A wireless network can be added either when the network is detected or by manually entering settings information. Before doing these steps, determine if authentication information is needed. 1. Click the wireless connection icon in the notification area. 2. Turn on WiFi and select one of the wireless connections and click Connect. PWS-870 User Manual 14 4. 5. Enter the required Security key and then tap OK to connect. The wireless connection is negotiated and you see the following screen. The wireless connection icon in the notification area shows a connected status whenever a wireless connection is present. 15 PWS-870 User Manual Turning On & Controlling the PWS-870 You are prompted to enter a Security key for secure access. Contact the network administrator for this key. Chapter 3 3. 3.4 Making Bluetooth Connections The PWS-870 comes with built-in Bluetooth functionality that allows you to connect and communicate with other Bluetooth-enabled devices. 3.4.1 Setting Up Bluetooth Follow these instructions to set up a Bluetooth connection. 1. Bluetooth is turned off in default setting, so if you want to connect to a Bluetooth device, please make sure the Bluetooth is turned on in Advantech Control Center Tap Module Control in Module page and turn on the Bluetooth PWS-870 User Manual 16 Chapter 3 In notification area, tap Bluetooth logo and select Add a Device. 17 PWS-870 User Manual Turning On & Controlling the PWS-870 2. 3. Select Bluetooth device and tap Next to add Bluetooth device. 4. Select Next for both PWS-870 and the Bluetooth device after passkey is confirmed. 5. The Bluetooth device is successfully added into PWS-870. PWS-870 User Manual 18 To view Bluetooth device added, tap Show Bluetooth Devices. It is recommended that you use a passkey to prevent unauthorized access to your PWS-870. 19 PWS-870 User Manual Turning On & Controlling the PWS-870 Note! Chapter 3 6. PWS-870 User Manual 20 Chapter Using Advantech Control Center 4.1 Advantech Control Center for PWS-870 Advantech Control Center is a useful tool for user to get PWS-870 basic system information and control PWS-870 easily 4.2 System Information Tap "Information" of Advantech Control Center to get the basic information of the system which includes followings: Batteries capacity information CPU temperature Fan speed Version of CPU, EC, PCB, and BIOS Product serial number Advantech Control Center version PWS-870 User Manual 22 Tap "System" of Advantech Control Center to configurate basic control setting. Chapter 4 4.3 System Control Using Advantech Control Center 23 PWS-870 User Manual Brightness Tap Brightness in System page and the screen brightness control bar will show up. User can scroll the bar to adjust the screen brightness. Check "Auto Brightness" to enable auto brightness feature. Note! When "Auto Brightness" is enabled, users cannot adjust the brightness via control bar PWS-870 User Manual 24 Chapter 4 Volume Tap Volume in System page to configurate the speaker volume. 25 PWS-870 User Manual Using Advantech Control Center Microphone Tap Microphone in System page to configurate microphone volume. Resolution Tap Resolution in System page to adjust screen resolution and orientation mode. Check "Allow the screen to auto-rotate" if user wants to enable screen auto rotation. Text Size Tap Text Size in System page to change text size. PWS-870 User Manual 26 Note! The accuracy of capacitive touch screen might vary according to different environments; therefore it is suggested to re-calibrate touch screen once user feel the touch screen is not as accurate as usual. Once the calibration is done, user can see below message. 27 PWS-870 User Manual Using Advantech Control Center Please use mouse instead of finger for re-calibration. Use mouse to click Start and wait for the process of calibration. DO NOT touch the screen during the calibration process. Chapter 4 Calibration Tap Calibration in System page to re-calibrate touch screen. Power Management Tap Power Management in System page to choose or customize power plan. 4.4 Module Control Tap "Module" of Advantech Control Center to configurate module setting. PWS-870 User Manual 28 29 PWS-870 User Manual Using Advantech Control Center Microphone Source Setting Tap Microphone Source Setting in Module page to choose preferred microphone source (when PWS-870 is docked). Chapter 4 Speaker Source Setting Tap Speaker Source Setting in Module page to choose preferred speaker source (when PWS-870 is docked). Hot Key Mode Setting Tap Hot Key Mode Setting in Module page to configurate hot key function. There are three pre-set modes, users can choose either one or customize their own setting. (i) Brightness Adjustment. Users can tap Brightness Adjustment to configurate hot key to control panel brightness. The default setting is the right key (barcode key) to increase panel brightness and the left key (home key) to reduce panel brightness. Users can click "Switch Key Control" to switch the function of the two buttons. Note! Once the "Switch Key Control" is clicked, this switch setting will apply to all hot key modes Users can click "Auto Brightness" to enable auto brightness/light sensor function. Once "Auto Brightness" is enabled, users cannot adjust panel brightness manually. PWS-870 User Manual 30 Note! Once the "Switch Key Control" is clicked, this switch setting will apply to all hot key modes. Note! To use Barcode function, please ensure the barcode is turned on in Module Control Setting. 31 PWS-870 User Manual Using Advantech Control Center Once the hot keys are set to Windows Home & Barcode Trigger mode, users can press barcode trigger hot key to scan any barcode and the barcode information can show in the notepad or word file. Chapter 4 (ii) Windows Home & Barcode Trigger This is the default hot key setting. The right button is for barcode trigger and the left button is for Windows Home. Users can click Switch Key Control to switch functions of left and right buttons. (iii) Personalize Hot Key Function Users can user this to configure hot keys to their desired functions. (iv) Volume Adjustment By choosing this setting, the hot keys can be use to increase or reduce speaker volume. PWS-870 User Manual 32 Chapter 4 Module Control Tap Module Control in Module page to control the on/off of each function. Users can easily tap the icons to power on or power off of each single function in this page. User can tap Factory Default to reset module on/off control to default settings (WLAN and fingerprint on; other modules off) or tap Flight mode to turn off all RF related modules (WLAN, WWAN, GPS, NFC and Bluetooth) Using Advantech Control Center 33 PWS-870 User Manual 4.5 Utility Tap "Utility" of Advantech Control Center to access demo utilities Note! Before you try these utilities, make sure the module related to the utility is set as "ON" in the Module Control page. PWS-870 User Manual 34 in Utility page and the camera utility will pop up. Users can tap icon either front camera or rear camera and do photo shooting . If flash light is needed (available for rear camera), tap to select or video recording to enable flash light. 35 PWS-870 User Manual Using Advantech Control Center Camera Make sure the camera module is turned on in the Module Control page. Tap Camera Chapter 4 Light Sensor Tap Light Sensor in Utility page and the demo light sensor utility will pop up and will show the current lux information. The lux information will vary according to the light of the environment (if the light sensor is on) Users can tap on to do camera setting as below. Sensor Hub Make sure the sensor hub is turned on in the Module Control page. Tap Sensor Hub in Utility page, the Sensor Diagnostics Tool will pop up. This tool will provide the raw data of each sensor. PWS-870 User Manual 36 Chapter 4 WWAN AirCard Make sure the SIM card is installed before using this function. Tap WWAN AirCard in Utility page, the Skylight utility will pop up and search for carrier. Using Advantech Control Center Tap "Connect" to connect to carrier. 37 PWS-870 User Manual Once connection is made, you can connect to internet. GPS Info Make sure GPS is turned on in the Module Control page. Tap GPS Info in Utility page, the GPS Information utility will pop up. Set COM Port to COM1 and Baud Rate to 9600 and then click Start GPS. You will get GPS information. PWS-870 User Manual 38 39 PWS-870 User Manual Using Advantech Control Center Tap Grab and follow the instruction to swipe the finger to get the fingerprint data. Users can save or load the fingerprint data. Chapter 4 Fingerprint Demo Make sure fingerprint is turned on in the Module Control page. Tap Fingerprint Demo in Utility page, the Fingerprint Demo utility will pop up. NFC Make sure NFC is turned on in the Module Control page. Tap NFC in Utility page, users will be directed to Stollmann's website for NFC utility download PWS-870 User Manual 40 41 PWS-870 User Manual Using Advantech Control Center Click Start NFC and the utility will try to detect if the device is equipped with NFC solution. The detection result will be shown in the lower left corner of the utility. Chapter 4 Fill in the information to register. After registration, users will get an email notification with download link provided. Use that link to download Stollmann NFC utility. After download of Stollmann NFC, run the utility. Click Configure and set the Controller to ETSIHCI (PN544), Bus to Serial, Port to COM3 and then click Save. Click Start RW, and put the card near the scan area (on the back side of PWS-870). You can see the scanned data. The scanning distance is around 3-4 cm. If users want to change data with another device with NFC function, users can try the P2P feature. Click SNEP server and then Start P2P. PWS-870 User Manual 42 43 PWS-870 User Manual Using Advantech Control Center Ignition Setting This setting is only for vehicle docking application. If users enable this ignition feature, when PWS-870 is docked in the vehicle docking station then it will turn on or off automatically when vehicle ignition on/off. Users can configurate the countdown period (0.5 to 30 minutes) for PWS-870 turn off. Tap Ignition Setting in Utility page, choose enable or disable. If choose enable, select the countdown time period. Chapter 4 Put together both device and user can see the other device will be detected. When PWS-870 is docked and vehicle is turned to ignition off, the PWS-870 will pop up a countdown warning message as below. User can tap OK to turn off PWS-870 or tap Cancel to keep PWS-870 on. If not action is taken, PWS-870 will automatically shut down after countdown period. PWS-870 User Manual 44 Chapter Maintenance 5.1 Maintaining the Battery Do not expose heat or attempt to disassemble the battery, and do not place the battery in water or in a fire. Do not subject the battery to strong impact, such as a blow from a hammer, or stepping on or dropping it. Do not puncture or disassemble the battery. Do not attempt to open or service the battery. Replace only with batteries designed specifically for this product. Keep the battery out of reach of children. Dispose of used batteries according to local regulations. 5.2 Maintaining the LCD Display Do not scratch the surface of the screen with any hard objects. Do not spray liquid directly on the screen or allow excess liquid to drip down inside the device. Do not place anything, such as food and drink, on the screen at any time to prevent damage to the screen. Clean the LCD display only with a soft cloth dampened with denatured alcohol or a proprietary LCD screen cleaner. 5.3 Cleaning the PWS-870 1. 2. Turn off the PWS-870 and unplug the power cord. Wipe the screen and exterior with a soft, damp cloth moistened only with water. Do not use liquid or aerosol cleaners on the screen, as these will discolor the finish and damage the screen. PWS-870 User Manual 46 Appendix Specifications A.1 Specifications Feature Specifications CPU & Chipset Intel® Core™ i3 Processor 1.7 GHz 4010U (Default) Intel® Core™ i5 Processor 1.9 GHz 4300U with Turbo Boost to 2.9GHz (By project) Intel® Core™ i7 vPro? Processor 1.7 GHz 4650U with Turbo Boost to 3.3 GHz (By project) Memory SO-DIMM DDR3L 1600MHz up to 8GB Storage Support mSATA SATAIII SSD 32GB~256GB Display 10.1" HD (1366x768) Low reflection LED Backlight LCD (400 nits) Touch Panel Capacitive multi touch Sunlight readable feature Display with Corning® Gorilla® Glass Gen2 Optional digitizer board Sensor Ambient light, Accelerometer (G-sensor), E-compass, Gyroscope Sensor - Screen Rotation: 0°, 90°, 270° Wireless Communication Default WIFI 802.11 a/b/g/n/ac Default Bluetooth V4.0 (Class2) + EDR Optional integrated LTE mobile broadband Optional dedicated GPS Camera Front Camera: 2M pixel CMOS Sensor; support Video Streaming Rear Camera: 5M pixel CMOS Sensor; with LED flash light and auto focus control Data Collection Optional Built-in 1D barcode scanner Optional Built-in 2D barcode scanner Optional Built-in NFC RFID reader Security 1. Optional Fingerprint scanner 2. TPM 1.2 3. Kensington cable lock slot Audio Output Integrated speakers Integrated microphone Input Capacitive multi-touch Programmable button x2 Capacitive pen On-screen QWERTY keyboard LED Status Indicator Power LED Battery LED RFID LED External I/O Interfaces USB 3.0 x 2; USB 2.0 x1 HDMI 1.4 x 1 SD card slot x1 (SDXC/UHS1/UHS2) Audio combo jack (Line-in/Line-out) x 1 DC-in x 1 Docking Port x1 (32PIN) SIM slot x1 Power Supply Main battery: 4S1P 14.4V 2730mAh Hot-Swappable external battery: 4S2P 14.4V 4080mAh Battery operation: Over 8hrs (with external battery) AC Adapter: AC 100V-240V 50/60Hz OS Support Windows Embedded 8.1 Industry Pro/Windows Embedded 8 Standard Windows 7 Pro 64bit PWS-870 User Manual 48 PCI compliant MSR & Smart Card Reader IO port sets: USB3.0 x1; LAN(10/100) x 1; RS232 x 2 UHF RFID Reader Operating Temperature: -10 to 50 °C Temperature & Humidity Storage Temperature: -20 to 60 °C Operating Humidity: 5%~95% @ 40 °C IP Rating IP65 Drop 4 feet drop onto Plywood, MIL-STD-810G 516.5 Procedure VI EMC CE/FCC Safety UL/CE/CB Accessories AC adaptor Digitizer pen Universal Cover Desk Docking Station External Battery Car Adapter Vehicle Docking Station Dimensions 25mm (H) x 305mm (L) x 207mm (W) Weight 1.4kg A.2 LED Status PWS-870 has 3 LEDs: Power LED, Battery LED, and NFC/RFID LED. Please see below for the status of each LED Table A.1: Power LED Status LED Behavior Power on Green Static Power off Off Sleep Blinking Table A.2: Battery LED DUT on/off AC in Internal Battery Green LED Orange Red LED LED Remark OFF No Yes Off Off Off System Off OFF Yes Yes Off Static Off Battery charging OFF Yes Yes Static Off Off Battery charge full ON No Yes Static Off Off System ON (Battery > 30%) ON Yes Yes Off Static Off Battery charging ON Yes Yes Static Off Off Battery charge full ON No Yes Off Off Static Battery Low (< 30%) ON No Yes Off Off Battery Low (< 10%) Blinking (Red LED light 0.2 sec, dark 0.8 sec) ON No Yes Off Off Off S3 Mode ON Yes Yes Off Static Off Battery charging (S3 Mode) ON Yes Yes Static Off Off Battery charge full (S3 Mode) 49 PWS-870 User Manual Appendix A Specifications Extension Modules Table A.3: NFC LED Status LED Behavior Press & release RFID button Green Static After successful scan and beeps Off User scenario: Press and release the RFID button and the RFID LED will turn on to indicate that the PWS-870 is scanning. The RFID LED turns off and the PWS-870 beeps to indicate a successful scan A.3 COM Port Setting Table A.4: COM Port Setting Function COM Port Baud Rate GPS COM1 9600 Barcode Scanner COM2 9600 NFC COM3 9600 PWS-870 User Manual 50 Appendix A Specifications PWS-870 User Manual 51 www.advantech.com Please verify specifications before quoting. This guide is intended for reference purposes only. All product specifications are subject to change without notice. No part of this publication may be reproduced in any form or by any means, electronic, photocopying, recording or otherwise, without prior written permission of the publisher. All brand and product names are trademarks or registered trademarks of their respective companies. © Advantech Co., Ltd. 2015 53 XXX-XXXX User Manual
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res Author : chunxia.zhao Create Date : 2015:02:13 16:35:32Z Modify Date : 2015:06:02 18:27:06+08:00 Has XFA : No Language : en XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Format : application/pdf Creator : chunxia.zhao Title : Template_V4.12_EV_User_Manual Creator Tool : FrameMaker 10.0.2 Metadata Date : 2015:06:02 18:27:06+08:00 Producer : Acrobat Distiller 10.1.13 (Windows) Document ID : uuid:a2fbfdca-572e-4e98-8b1e-27263791a149 Instance ID : uuid:5eb96ed8-aa0f-44f9-9812-32c8a8642bac Page Mode : UseOutlines Page Count : 61EXIF Metadata provided by EXIF.tools