Advantech Co TPC130WW 802.11a/b/g/n/ac WLAN + Bluetooth PCI-E Mini Card User Manual V4 12 EV User Manual

Advantech Co Ltd 802.11a/b/g/n/ac WLAN + Bluetooth PCI-E Mini Card V4 12 EV User Manual

User Manual

User ManualPWS-870Fully-Rugged Tablet PC
PWS-870 User Manual iiCopyrightThe documentation and the software included with this product are copyrighted 2015by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the rightto make improvements in the products described in this manual at any time withoutnotice. No part of this manual may be reproduced, copied, translated or transmittedin any form or by any means without the prior written permission of Advantech Co.,Ltd. Information provided in this manual is intended to be accurate and reliable. How-ever, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringe-ments of the rights of third parties, which may result from its use.AcknowledgementsAll other product names or trademarks are properties of their respective owners.Part No. 2008087000 Edition 1Printed in Taiwan February 2015
PWS-870 User Manual ivTechnical Support and Assistance1. Visit the Advantech website at http://support.advantech.com where you can find the latest information about the product.2. Contact your distributor, sales representative, or Advantech's customer service center for technical support if you need additional assistance. Please have the following information ready before you call:–Product name and serial number–Description of your peripheral attachments–Description of your software (operating system, version, application software, etc.)–A complete description of the problem–The exact wording of any error messagesSafety InstructionsUse the following safety guidelines to help protect yourself and PWS-870.Do not attempt to service the PWS-870 yourself. Always follow installation instructions closely.Be sure that nothing rests on the AC adapter's power cable and that the cable is not located where it can be tripped over or stepped on.Do not cover the AC adaptor with papers or other items that will reduce cooling; also, do not use the AC adapter while it is inside a carrying case.Use only the AC adapter, power cord, and batteries that are approved for use with this PWS-870. Use of another type of battery or AC adapter may cause risk of fire or explosion.If you use an extension cable with the AC adapter, ensure that the total ampere rating of the products plugged in to the extension cable does not exceed the ampere rating of the extension cable.When you move the PWS-870 between environments with very different tem-perature and/or humidity ranges, condensation may form on or within the PWS-870. To avoid damaging the PWS-870, allow sufficient time for the moisture to evaporate before using the PWS-870.When you disconnect a cable, pull on its connector or on its strain relief loop, not on the cable itself. As you pull out the connector, keep it evenly aligned to avoid bending any connector pins. Also, before you connect a cable make sure both connectors are correctly oriented and aligned.
v PWS-870 User Manual Battery SafetyRTC Battery CautionRISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.Do not place the battery incorrectly as this may cause danger of explosion.Dispose of used batteries according to the manufacturer's instructions.Do not dispose of batteries in a fire. They may explode. Check with local author-ities for disposal instructions.Battery Pack CautionThe battery used in this device may present a risk of fire or chemical burn if mis-treated. Do not disassemble, heat above 50 °C (in battery discharging condi-tion), or incinerate. Replace internal battery with Li-ion 14.4V 2370mAh and Cell SANYO only. Use of another battery may present a risk of fire or explosion.Dispose of used batteries according to local disposal regulations. Keep away from children. Do not disassemble and do not dispose of in a fire.Battery Charge NoticeIt is important to consider the environment temperature whenever you are chargingthe Lithium-Ion battery pack. The process is more efficient at normal room tempera-ture or slightly cooler. It is essential that you charge batteries within the stated rangeof 0°C to 40°C. Charging batteries outside of the specified range could damage thebatteries and shorten their charging life cycle.Storage and Safety NoticeAlthough charge Lithium-Ion batteries may be left unused for several months, theircapacity may be depleted due to the build up of internal resistance. If this happensthey will require recharging prior to use. Lithium-Ion batteries may be stored at tem-peratures between -20°C to 60°C, however they may be depleted more rapidly at thehigh end of this range. It is recommended to store batteries within normal room tem-perature ranges.
PWS-870 User Manual vi
vii PWS-870 User Manual ContentsChapter 1 Rugged and Ready to Go....................11.1 Symbols Used in this Manual.................................................................... 21.2 Product Features....................................................................................... 21.3 Package Contents..................................................................................... 21.4 Optional Accessories ................................................................................ 31.5 Optional Modules ...................................................................................... 31.6 Exploring the PWS-870............................................................................. 31.6.1 Front View..................................................................................... 31.6.2 Rear View ..................................................................................... 41.6.3 Side Views .................................................................................... 51.6.4 Top View....................................................................................... 51.6.5 Bottom View.................................................................................. 6Chapter 2 Getting Started & Making Connections72.1 Inserting a Memory Card........................................................................... 82.2 Removing a Memory Card ........................................................................ 82.3 Installing a SIM.......................................................................................... 82.4 Using the Tether........................................................................................ 92.5 Connecting the Power............................................................................... 92.6 Connecting to a Monitor............................................................................ 92.7 Connecting USB Devices........................................................................ 102.8 Connecting Headphones/ Microphone.................................................... 10Chapter 3 Turning On & Controlling the PWS-870113.1 Turning on ............................................................................................... 123.2 Controlling the PWS-870......................................................................... 123.2.1 Using the Touch Screen ............................................................. 123.2.2 Using the Tap Function............................................................... 123.2.3 Using the Buttons........................................................................ 123.2.4 Using the On-Screen Keyboard.................................................. 133.3 Making WiFi Connection ......................................................................... 143.4 Making Bluetooth Connections ............................................................... 163.4.1 Setting Up Bluetooth................................................................... 16Chapter 4 Using Advantech Control Center .....214.1 Advantech Control Center for PWS-870 ................................................. 224.2 System Information ................................................................................. 224.3 System Control........................................................................................ 234.4 Module Control........................................................................................ 284.5 Utility ....................................................................................................... 34Chapter 5 Maintenance.......................................455.1 Maintaining the Battery ........................................................................... 46
PWS-870 User Manual viii5.2 Maintaining the LCD Display................................................................... 465.3 Cleaning the PWS-870 ........................................................................... 46Appendix A Specifications.................................... 47A.1 Specifications.......................................................................................... 48A.2 LED Status.............................................................................................. 49Table A.1: Power LED ............................................................... 49Table A.2: Battery LED .............................................................. 49Table A.3: NFC LED.................................................................. 50A.3 COM Port Setting.................................................................................... 50Table A.4: COM Port Setting ..................................................... 50
Chapter 11Rugged and Ready to Go
PWS-870 User Manual 2Congratulations on your purchase of the PWS-870 Fully Rugged Tablet PC. Thisproduct combines rugged design with reliable performance and powerful functionalityto best suit all your needs, in a wide range of working conditions. This user manualoutlines all you need to know to set up and use your PWS-870. If you have any fur-ther questions or queries, contact our technical support team via our website:http://www.advantech.com.tw/1.1 Symbols Used in this Manual1.2 Product FeaturesHigh-performance 4th Gen. Intel® core i processorBuilt-in WLAN/Bluetooth/GPS/WWAN/NFC functionsDurable, shock-resistant designIP65 sealing & built to withstand a 4 ft drop10.1" Sunlight option / HD LCDI/O ports for expansionLong battery life1.3 Package ContentsEnsure all the following items are present when you receive your PWS-870. If any ofthese items are missing, contact your vendor immediately.PWS-870 Tablet PCAC power adaptorCapacitive penTetherWarning! Denotes information that must be observed.Failure to do so may result in personal harm or damage to the product.Note! Denotes information that must be observed.Failure to do so may result in personal harm or damage to the product.Note! Screens used in this manual are for illustrative purposes only. Actual screens may vary depending on your product version.
3 PWS-870 User ManualChapter 1 Rugged and Ready to Go1.4 Optional AccessoriesDesk docking stationVehicle docking stationExternal batteryUniversal cover Car adapterVesa mount1.5 Optional Modules1D / 2D barcode scannerNFC RFID ReaderLTE WWANGPS moduleFingerprint1.6 Exploring the PWS-8701.6.1 Front ViewNo. Component1 2M Front Camera2 Home Key (Programmable)3 Function Key (Programmable)4 Speakers5 Fingerprint (Optional)213454
PWS-870 User Manual 41.6.2 Rear ViewNo. Component6 5M AF Camera with Flash Light7FAN8 NFC RFID Reader (Optional)9 Capacitive Pen10 Latch (For External Battery & SIM Card Slot)11 SIM Card Slot12 Connector for External Battery7869101112
5 PWS-870 User ManualChapter 1 Rugged and Ready to Go1.6.3 Side Views1.6.4 Top ViewNo. Component1 Kensington Lock2 Power Button3 Audio Combo Jack4 HDMI Connector (1.4)5 USB Connector (USB 3.0)6 DC-in7 Screw Holes for Extension Module8 USB Connector (USB 3.0)9 USB Connector (USB 2.0)10 SD Card Slot (SDXC)12356778910No. Component1 D-Ring for Shoulder Belt 2 Vent of Fan3 1D or 2D Barcode Scanner (Optional) 1 3 2 1
PWS-870 User Manual 61.6.5 Bottom ViewNo. Component1 Docking connector1
Chapter 22Getting Started & Making Connections
PWS-870 User Manual 82.1 Inserting a Memory CardYou can insert an SD card to store data, which needs to be later transferred toanother machine, or to simply expand the storage capacity of the PWS-870. 1. Open the SD card compartment cover.2. Insert the SD card with the metal contacts facing upwards, until it clicks into place.3. Close the memory card compartment cover.2.2 Removing a Memory Card1. Open the SD card compartment cover.2. Press the SD card inwards to eject it from the slot.3. Remove the card and close the SD card compartment cover.2.3 Installing a SIM1. Make sure the system is turned off. Unlock the battery latch and remove the cover2. Push and open the SIM card cover.3. Put the SIM card into the slot, with the metallic part facing down until it clicks into place.4. Close the SIM card cover and push back the SIM card cover.5. Close the cover and lock the battery latch.
9 PWS-870 User ManualChapter 2 Getting Started & Making Connections2.4 Using the Tether1. Insert one of the tether's loop end through the hole of the capacitive pen. 2. Insert the other end through the first loop and pull it tight.3. Insert the other loop end to either D-ring of PWS-870. Insert the capacitive pen through the loop and pull it tight2.5 Connecting the PowerBefore you can use your PWS-870, you must fully charge the battery. Connect thepower adapter as shown and leave to charge for:A minimum of 2 hours when using the internal batteryA minimum of 5 hours when a second battery is installed2.6 Connecting to a MonitorYou can connect the PWS-870 to an external monitor for enhanced viewing.Connect one end of an HDMI cable to the HDMI port on the left side of the PWS-870.Connect the other end to the HDMI port on the monitor.
PWS-870 User Manual 102.7 Connecting USB DevicesYou can connect peripheral devices, such as a USB keyboard and mouse, as well asother wireless devices using the USB ports on the PWS-870. PWS-870 has one USB3.0 port on the both sides and one USB 2.0 port on the left side.2.8 Connecting Headphones/ MicrophoneYou can connect a pair of headphones or microphone using the audio combo jack onthe left side of the PWS-870.Note! PWS-870 uses audio combo jack therefore for microphone, PWS-870 only supports TRRS type. For headphones, both TRRS and TRS types can be supported.
Chapter 33Turning On & Controlling the PWS-870
PWS-870 User Manual 123.1 Turning on1. Press and hold the power button to turn on the PWS-870.3.2 Controlling the PWS-8703.2.1 Using the Touch ScreenThe PWS-870 is equipped with touch screen technology, for ease of use when youare on the go. Simply tap the screen with your finger to select icons and run applica-tions.3.2.2 Using the Tap FunctionWhen you tap on the screen with the a pen or stylus, it emulates click functions of aregular mouse.To emulate a left click, single tap the screen once.To emulate a right click, tap and hold the screen.To emulate a double click, tap the screen twice.3.2.3 Using the ButtonsThere are two buttons on the front side of PWS-870.The button in the left side of panel is Home key. The other button in the right side ofpanel is for Barcode key (only suitable for the models equipped with barcode options)The Home and Barcode buttons can be configured as shortcuts to access your favor-ite or frequently used programs. Please refer to Chapter 4.4 for more detail settings.Button Name Function Home Press to return Home Barcode Press to trigger barcode.
13 PWS-870 User ManualChapter 3 Turning On & Controlling the PWS-8703.2.4 Using the On-Screen KeyboardTap keyboard icon to bring up the on-screen keyboard.Use your finger to tap and enter letters, numbers and symbols as you would with aregular keyboard.
PWS-870 User Manual 143.3 Making WiFi ConnectionThe PWS-870 comes pre-loaded with WLAN module, you can send and receive sig-nals to a WiFi network then synchronize files.A wireless network can be added either when the network is detected or by manuallyentering settings information. Before doing these steps, determine if authenticationinformation is needed.1. Click the wireless connection icon in the notification area.2. Turn on WiFi and select one of the wireless connections and click Connect.Note! WiFi access requires a separate purchase of a service contract with a wireless service provider. Contact a wireless service provider for more information.
15 PWS-870 User ManualChapter 3 Turning On & Controlling the PWS-8703. You are prompted to enter a Security key for secure access. Contact the net-work administrator for this key.4. Enter the required Security key and then tap OK to connect.5. The wireless connection is negotiated and you see the following screen.The wireless connection icon in the notification area shows a connected status when-ever a wireless connection is present.
PWS-870 User Manual 163.4 Making Bluetooth ConnectionsThe PWS-870 comes with built-in Bluetooth functionality that allows you to connectand communicate with other Bluetooth-enabled devices.3.4.1 Setting Up BluetoothFollow these instructions to set up a Bluetooth connection.1. Bluetooth is turned off in default setting, so if you want to connect to a Bluetooth device, please make sure the Bluetooth is turned on in Advantech Control Cen-terTap Module Control in Module page and turn on the Bluetooth
17 PWS-870 User ManualChapter 3 Turning On & Controlling the PWS-8702. In notification area, tap Bluetooth logo and select Add a Device.
PWS-870 User Manual 183. Select Bluetooth device and tap Next to add Bluetooth device.4. Select Next for both PWS-870 and the Bluetooth device after passkey is con-firmed.5. The Bluetooth device is successfully added into PWS-870.
19 PWS-870 User ManualChapter 3 Turning On & Controlling the PWS-8706. To view Bluetooth device added, tap Show Bluetooth Devices.Note! It is recommended that you use a passkey to prevent unauthorized access to your PWS-870.
PWS-870 User Manual 20
Chapter 44Using Advantech Control Center
PWS-870 User Manual 224.1 Advantech Control Center for PWS-870Advantech Control Center is a useful tool for user to get PWS-870 basic system infor-mation and control PWS-870 easily4.2 System InformationTap "Information" of Advantech Control Center to get the basic information of the sys-tem which includes followings:Batteries capacity informationCPU temperatureFan speedVersion of CPU, EC, PCB, and BIOSProduct serial numberAdvantech Control Center version
23 PWS-870 User ManualChapter 4 Using Advantech Control Center4.3 System ControlTap "System" of Advantech Control Center to configurate basic control setting.
PWS-870 User Manual 24BrightnessTap Brightness in System page and the screen brightness control bar will show up.User can scroll the bar to adjust the screen brightness. Check "Auto Brightness" toenable auto brightness feature.Note! When "Auto Brightness" is enabled, users cannot adjust the brightness via control bar
25 PWS-870 User ManualChapter 4 Using Advantech Control CenterVolumeTap Volume in System page to configurate the speaker volume.MicrophoneTap Microphone in System page to configurate microphone volume.
PWS-870 User Manual 26ResolutionTap Resolution in System page to adjust screen resolution and orientation mode.Check "Allow the screen to auto-rotate" if user wants to enable screen auto rotation. Text SizeTap Text Size in System page to change text size.
27 PWS-870 User ManualChapter 4 Using Advantech Control CenterCalibrationTap Calibration in System page to re-calibrate touch screen.Please use mouse instead of finger for re-calibration.Use mouse to click Start and wait for the process of calibration. DO NOT touch thescreen during the calibration process.Once the calibration is done, user can see below message.Note! The accuracy of capacitive touch screen might vary according to differ-ent environments; therefore it is suggested to re-calibrate touch screen once user feel the touch screen is not as accurate as usual.
PWS-870 User Manual 28Power ManagementTap Power Management in System page to choose or customize power plan.4.4 Module ControlTap "Module" of Advantech Control Center to configurate module setting.
29 PWS-870 User ManualChapter 4 Using Advantech Control CenterSpeaker Source SettingTap Speaker Source Setting in Module page to choose preferred speaker source(when PWS-870 is docked).Microphone Source SettingTap Microphone Source Setting in Module page to choose preferred microphonesource (when PWS-870 is docked).
PWS-870 User Manual 30Hot Key Mode SettingTap Hot Key Mode Setting in Module page to configurate hot key function. There arethree pre-set modes, users can choose either one or customize their own setting.(i) Brightness Adjustment. Users can tap Brightness Adjustment to configurate hot key to control panel bright-ness. The default setting is the right key (barcode key) to increase panel brightnessand the left key (home key) to reduce panel brightness. Users can click "Switch KeyControl" to switch the function of the two buttons. Users can click "Auto Brightness" to enable auto brightness/light sensor function.Once "Auto Brightness" is enabled, users cannot adjust panel brightness manually.Note! Once the "Switch Key Control" is clicked, this switch setting will apply to all hot key modes
31 PWS-870 User ManualChapter 4 Using Advantech Control Center(ii) Windows Home & Barcode TriggerThis is the default hot key setting. The right button is for barcode trigger and the leftbutton is for Windows Home. Users can click Switch Key Control to switch functionsof left and right buttons.Once the hot keys are set to Windows Home & Barcode Trigger mode, users canpress barcode trigger hot key to scan any barcode and the barcode information canshow in the notepad or word file.Note! Once the "Switch Key Control" is clicked, this switch setting will apply to all hot key modes.Note! To use Barcode function, please ensure the barcode is turned on in Module Control Setting.
PWS-870 User Manual 32(iii) Personalize Hot Key FunctionUsers can user this to configure hot keys to their desired functions.(iv) Volume AdjustmentBy choosing this setting, the hot keys can be use to increase or reduce speaker vol-ume.
33 PWS-870 User ManualChapter 4 Using Advantech Control CenterModule ControlTap Module Control in Module page to control the on/off of each function. Users caneasily tap the icons to power on or power off of each single function in this page. Usercan tap Factory Default to reset module on/off control to default settings (WLAN andfingerprint on; other modules off) or tap Flight mode to turn off all RF related modules(WLAN, WWAN, GPS, NFC and Bluetooth)
PWS-870 User Manual 344.5 UtilityTap "Utility" of Advantech Control Center to access demo utilitiesNote! Before you try these utilities, make sure the module related to the utility is set as "ON" in the Module Control page.
35 PWS-870 User ManualChapter 4 Using Advantech Control CenterLight SensorTap Light Sensor in Utility page and the demo light sensor utility will pop up and willshow the current lux information. The lux information will vary according to the light ofthe environment (if the light sensor is on)CameraMake sure the camera module is turned on in the Module Control page. Tap Camerain Utility page and the camera utility will pop up. Users can tap icon to selecteither front camera or rear camera and do photo shooting or video recording. If flash light is needed (available for rear camera), tap to enable flashlight.
PWS-870 User Manual 36Users can tap on to do camera setting as below.Sensor HubMake sure the sensor hub is turned on in the Module Control page. Tap Sensor Hubin Utility page, the Sensor Diagnostics Tool will pop up. This tool will provide the rawdata of each sensor.
37 PWS-870 User ManualChapter 4 Using Advantech Control CenterWWAN AirCardMake sure the SIM card is installed before using this function. Tap WWAN AirCard inUtility page, the Skylight utility will pop up and search for carrier. Tap "Connect" to connect to carrier.
PWS-870 User Manual 38Once connection is made, you can connect to internet.GPS InfoMake sure GPS is turned on in the Module Control page. Tap GPS Info in Utilitypage, the GPS Information utility will pop up. Set COM Port to COM1 and Baud Rateto 9600 and then click Start GPS. You will get GPS information.
39 PWS-870 User ManualChapter 4 Using Advantech Control CenterFingerprint DemoMake sure fingerprint is turned on in the Module Control page. Tap Fingerprint Demoin Utility page, the Fingerprint Demo utility will pop up. Tap Grab and follow the instruction to swipe the finger to get the fingerprint data.Users can save or load the fingerprint data.
PWS-870 User Manual 40NFCMake sure NFC is turned on in the Module Control page. Tap NFC in Utility page,users will be directed to Stollmann's website for NFC utility download
41 PWS-870 User ManualChapter 4 Using Advantech Control CenterFill in the information to register. After registration, users will get an email notificationwith download link provided. Use that link to download Stollmann NFC utility.After download of Stollmann NFC, run the utility. Click Configure and set the Control-ler to ETSIHCI (PN544), Bus to Serial, Port to COM3 and then click Save.Click Start NFC and the utility will try to detect if the device is equipped with NFCsolution. The detection result will be shown in the lower left corner of the utility.
PWS-870 User Manual 42Click Start RW, and put the card near the scan area (on the back side of PWS-870).You can see the scanned data. The scanning distance is around 3-4 cm.If users want to change data with another device with NFC function, users can try theP2P feature. Click SNEP server and then Start P2P.
43 PWS-870 User ManualChapter 4 Using Advantech Control CenterPut together both device and user can see the other device will be detected.Ignition SettingThis setting is only for vehicle docking application. If users enable this ignition fea-ture, when PWS-870 is docked in the vehicle docking station then it will turn on or offautomatically when vehicle ignition on/off. Users can configurate the countdownperiod (0.5 to 30 minutes) for PWS-870 turn off.Tap Ignition Setting in Utility page, choose enable or disable. If choose enable, selectthe countdown time period.
PWS-870 User Manual 44When PWS-870 is docked and vehicle is turned to ignition off, the PWS-870 will popup a countdown warning message as below. User can tap OK to turn off PWS-870 ortap Cancel to keep PWS-870 on. If not action is taken, PWS-870 will automaticallyshut down after countdown period.
Chapter 55Maintenance
PWS-870 User Manual 465.1 Maintaining the BatteryDo not expose heat or attempt to disassemble the battery, and do not place the battery in water or in a fire.Do not subject the battery to strong impact, such as a blow from a hammer, or stepping on or dropping it.Do not puncture or disassemble the battery.Do not attempt to open or service the battery.Replace only with batteries designed specifically for this product.Keep the battery out of reach of children.Dispose of used batteries according to local regulations.5.2 Maintaining the LCD DisplayDo not scratch the surface of the screen with any hard objects.Do not spray liquid directly on the screen or allow excess liquid to drip down inside the device.Do not place anything, such as food and drink, on the screen at any time to pre-vent damage to the screen.Clean the LCD display only with a soft cloth dampened with denatured alcohol or a proprietary LCD screen cleaner.5.3 Cleaning the PWS-8701. Turn off the PWS-870 and unplug the power cord.2. Wipe the screen and exterior with a soft, damp cloth moistened only with water. Do not use liquid or aerosol cleaners on the screen, as these will discolor the finish and damage the screen.
Appendix AASpecifications
PWS-870 User Manual 48A.1 SpecificationsFeature SpecificationsCPU & ChipsetIntel® Core™ i3 Processor 1.7 GHz 4010U (Default)Intel® Core™ i5 Processor 1.9 GHz 4300U with Turbo Boost to 2.9GHz (By project)Intel® Core™ i7 vPro? Processor 1.7 GHz 4650U with Turbo Boost to 3.3 GHz (By project)Memory SO-DIMM DDR3L 1600MHz up to 8GBStorage Support mSATA SATAIII SSD 32GB~256GBDisplay 10.1" HD (1366x768) Low reflection LED Backlight LCD (400 nits)Touch PanelCapacitive multi touch Sunlight readable feature Display with Corning® Gorilla® Glass Gen2 Optional digitizer boardSensor Ambient light, Accelerometer (G-sensor), E-compass, Gyroscope Sensor - Screen Rotation: 0°, 90°, 270°Wireless Communica-tionDefault WIFI 802.11 a/b/g/n/ac Default Bluetooth V4.0 (Class2) + EDR Optional integrated LTE mobile broadband Optional dedicated GPSCamera Front Camera: 2M pixel CMOS Sensor; support Video StreamingRear Camera: 5M pixel CMOS Sensor; with LED flash light and auto focus controlData Collection Optional Built-in 1D barcode scannerOptional Built-in 2D barcode scanner Optional Built-in NFC RFID readerSecurity 1. Optional Fingerprint scanner2. TPM 1.2 3. Kensington cable lock slotAudio Output Integrated speakersIntegrated microphoneInputCapacitive multi-touchProgrammable button x2Capacitive penOn-screen QWERTY keyboardLED Status Indicator Power LEDBattery LEDRFID LEDExternal I/O InterfacesUSB 3.0 x 2; USB 2.0 x1HDMI 1.4 x 1SD card slot x1 (SDXC/UHS1/UHS2)Audio combo jack (Line-in/Line-out) x 1DC-in x 1Docking Port x1 (32PIN)SIM slot x1 Power SupplyMain battery: 4S1P 14.4V 2730mAhHot-Swappable external battery: 4S2P 14.4V 4080mAhBattery operation: Over 8hrs (with external battery)AC Adapter: AC 100V-240V 50/60HzOS Support Windows Embedded 8.1 Industry Pro/Windows Embedded 8 Stan-dardWindows 7 Pro 64bit
49 PWS-870 User ManualAppendix A SpecificationsA.2 LED StatusPWS-870 has 3 LEDs: Power LED, Battery LED, and NFC/RFID LED. Please seebelow for the status of each LEDExtension Modules PCI compliant MSR & Smart Card ReaderIO port sets: USB3.0 x1; LAN(10/100) x 1; RS232 x 2UHF RFID ReaderTemperature & Humidity Operating Temperature: -10 to 50 °CStorage Temperature: -20 to 60 °COperating Humidity: 5%~95% @ 40 °CIP Rating IP65Drop 4 feet drop onto Plywood, MIL-STD-810G 516.5 Procedure VIEMC CE/FCCSafety UL/CE/CBAccessoriesAC adaptorDigitizer penUniversal CoverDesk Docking StationExternal BatteryCar AdapterVehicle Docking StationDimensions 25mm (H) x 305mm (L) x 207mm (W)Weight 1.4kgTable A.1: Power LEDStatus LED BehaviorPower on Green StaticPower off OffSleep BlinkingTable A.2: Battery LEDDUT on/off AC in Internal Battery Green LED Orange LED Red LED RemarkOFF No Yes Off Off Off System OffOFF Yes Yes Off Static Off Battery chargingOFF Yes Yes Static Off Off Battery charge fullON No Yes Static Off Off System ON (Battery > 30%)ON Yes Yes Off Static Off Battery chargingON Yes Yes Static Off Off Battery charge fullON No Yes Off Off Static Battery Low (< 30%)ON No Yes Off Off Blinking Battery Low (< 10%)(Red LED light 0.2 sec, dark 0.8 sec)ON No Yes Off Off Off S3 ModeON Yes Yes Off Static Off Battery charging (S3 Mode)ON Yes Yes Static Off Off Battery charge full (S3 Mode)
PWS-870 User Manual 50User scenario:Press and release the RFID button and the RFID LED will turn on to indicate that thePWS-870 is scanning. The RFID LED turns off and the PWS-870 beeps to indicate asuccessful scanA.3 COM Port Setting?Table A.3: NFC LEDStatus LED BehaviorPress & release RFID button Green StaticAfter successful scan and beeps OffTable A.4: COM Port SettingFunction COM Port Baud RateGPS COM1 9600Barcode Scanner COM2 9600NFC COM3 9600
51 PWS-870 User ManualAppendix A Specifications
www.advantech.comPlease verify specifications before quoting. This guide is intended for referencepurposes only.All product specifications are subject to change without notice.No part of this publication may be reproduced in any form or by any means,electronic, photocopying, recording or otherwise, without prior written permis-sion of the publisher.All brand and product names are trademarks or registered trademarks of theirrespective companies.© Advantech Co., Ltd. 2015
53 XXX-XXXX User Manual

Navigation menu