Advantech PCA 6186 Manual, Ed. 1 User Manual To The 35596af2 8480 4ced B533 64b4979b7528
User Manual: Advantech PCA-6186 to the manual
Open the PDF directly: View PDF
Page Count: 136 [warning: Documents this large are best viewed by clicking the View PDF Link!]
- Contents
- Chapter 1 Hardware Configuration
- Chapter 2 Connecting Peripherals
- 2.1 Introduction
- 2.2 Primary (CN1) and Secondary (CN2) IDE Connec tors
- 2.3 Floppy Drive Connector (CN3)
- 2.4 Parallel Port (CN4)
- 2.5 USB Ports (CN6, CN31, and CN32)
- 2.6 VGA Connector (CN7)
- 2.7 10/100Base-T Ethernet Connectors (CN8 and CN34)
- 2.8 Serial Ports (CN9: COM1; CN10: COM2)
- 2.9 PS/2 Keyboard and Mouse Connectors (CN11 and CN33)
- 2.10 External Keyboard Connector (CN12)
- 2.11 Infrared (IR) Connector (CN13)
- 2.12 CPU Fan Connector (CN14)
- 2.13 Front Panel Connectors (CN16, 17, 18, 19, 21&22)
- 2.14 ATX Power Control Connectors (CN20 and 21)
- 2.15 SM Bus Connector (CN29)
- 2.16 Connecting to SNMP-1000 remote manager
- 2.17 AC-97 Audio Interface
- 2.18 Auxiliary 4-pin power connector (CN46 and CN47)
- Chapter 3 Award BIOS Setup
- 3.1 Introduction
- 3.2 Entering Setup
- 3.3 Standard CMOS Setup
- 3.4 Advanced BIOS Features
- Figure 3.3: Advanced BIOS features screen
- 3.4.1 Virus Warning
- 3.4.2 L1 & L2 Cache
- 3.4.3 Quick Power On Self Test
- 3.4.4 First/Second/Third/Other Boot Device
- 3.4.5 Swap Floppy Drive
- 3.4.6 Boot UP Floppy Seek
- 3.4.7 Boot Up NumLock Status
- 3.4.8 Gate A20 Option
- 3.4.9 Typematic Rate Setting
- 3.4.10 Typematic Rate (Chars/Sec)
- 3.4.11 Typematic Delay (msec)
- 3.4.12 Security Option
- 3.4.13 APIC Mode
- 3.4.14 MPS Version Control For OS
- 3.5 Advanced Chipset Features
- Figure 3.4: Advanced chipset features screen
- 3.5.1 DRAM Timing Selectable
- 3.5.2 CAS Latency Time
- 3.5.3 Active to Precharge Delay
- 3.5.4 DRAM RAS# to CAS# Delay
- 3.5.5 RAS# Precharge Time
- 3.5.6 System BIOS Cacheable
- 3.5.7 Video Bios Cacheable
- 3.5.8 Memory Hole At 15M-16M
- 3.5.9 Delayed Transaction
- 3.5.10 Delay Prior to Thermal
- 3.5.11 AGP Aperture Size (MB)
- 3.5.12 On-Chip VGA
- 3.5.13 On-Chip Frame Buffer Size
- 3.5.14 Boot Display
- 3.6 Integrated Peripherals
- 3.6.1 IDE Primary (Secondary) Master/Slave PIO/UDMA Mode,
- 3.6.2 On-Chip Secondary PCI IDE
- 3.6.3 USB Controller
- 3.6.4 USB Keyboard/Mouse Support
- 3.6.5 AC97 Audio
- 3.6.6 Init Display First
- 3.6.7 Onboard LAN1 Control
- 3.6.8 Onboard LAN2 Control
- 3.6.9 IDE HDD Block Mode
- 3.6.10 Onboard FDC Controller
- 3.6.11 Onboard Serial Port 1
- 3.6.12 Onboard Serial Port 2
- 3.6.13 UART Mode Select
- 3.6.14 RxD, TxD Active
- 3.6.15 IR Transmission Delay
- 3.6.16 UR2 Duplex Mode
- 3.6.17 Onboard Parallel Port
- 3.6.18 Parallel Port Mode
- 3.6.19 EPP Mode Select
- 3.6.20 ECP Mode Use DMA
- 3.7 Power Management Setup
- Figure 3.7: Power management setup screen (1)
- 3.7.1 Power-Supply Type
- 3.7.2 ACPI function
- 3.7.3 Power Management
- 3.7.4 Video Off In Suspend
- 3.7.5 Modem Use IRQ
- 3.7.6 HDD Power Down
- 3.7.7 Soft-Off by PWR-BTTN
- 3.7.8 CPU THRM-Throttling
- 3.7.9 PowerOn By LAN
- 3.7.10 PowerOn By Modem
- 3.7.11 PowerOn By Alarm
- 3.7.12 Primary IDE 0 (1) and Secondary IDE 0 (1)
- 3.7.13 FDD, COM, LPT PORT
- 3.7.14 PCI PIRQ [A-D]#
- 3.8 PnP/PCI Configurations
- 3.9 PC Health Status
- 3.10 Password Setting
- 3.11 Save & Exit Setup
- 3.12 Exit Without Saving
- Chapter 4 Chipset Software Installation Utility
- Chapter 5 AGP VGA Setup
- Chapter 6 LAN Configuration
- Chapter 7 USB 2.0 Configuration
- Chapter 8 Ultra ATA Storage Driver Setup
- Chapter 9 Onboard Security Setup
- Appendix A Programming the watchdog timer
- Appendix B Pin Assignments
- B.1 IDE Hard Drive Connector (CN1, CN2)
- B.2 Floppy Drive Connector (CN3)
- B.3 Parallel Port Connector (CN4)
- B.4 USB Connector (CN6)
- B.5 VGA Connector (CN7)
- B.7 COM1/COM2 RS-232 Serial Port (CN9, CN10)
- B.8 Keyboard and Mouse Connnector (CN11)
- B.9 External Keyboard Connector (CN12)
- B.10 IR Connector (CN13).
- B.11 CPU Fan Power Connector (CN14)
- B.12 Power LED and Keyboard Lock (CN16)
- B.13 External Speaker Connector (CN17)
- B.14 Reset Connector (CN18)
- B.15 HDD LED Connector (CN19)
- B.16 ATX Feature Connector (CN20)
- B.17 ATX Soft Power Switch (CN21))
- B.18 H/W Monitor Alarm (CN22)
- B.19 Extension I/O Board Connector (CN27)
- B.20 Extension I/O Board Connector (CN28)
- B.21 SM Bus Connector (CN29)
- B.22 SM Bus Connector (CN 29)
- B.23 PS/2 Mouse Connector (CN33)
- B.24 AC-97 Audio Interface (CN43)
- B.25 System I/O Ports
- B.26 DMA Channel Assignments
- B.27 Interrupt Assignments
- B.28 1st MB Memory Map
- B.29 PCI Bus Map