Aeon Labs DSB05 Multisensor - Motion, Temperature, Humidity User Manual Multisensor manual V10
Aeon Labs LLC. Multisensor - Motion, Temperature, Humidity Multisensor manual V10
Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1728446 |
| Application ID | rhzpamwFLG2C4MrQxvY2oQ== |
| Document Description | Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 96.85kB (1210603 bits) |
| Date Submitted | 2012-06-21 00:00:00 |
| Date Available | 2012-06-25 00:00:00 |
| Creation Date | 2012-05-30 14:00:47 |
| Producing Software | Adobe PDF library 9.90 |
| Document Lastmod | 2012-06-21 11:59:29 |
| Document Title | Multisensor-manual-V10 |
| Document Creator | Adobe Illustrator CS5 |
Important Disclaimer: This product uses radio to wirelessly communicate data between itself and other devices. Radio communication is inherently not always 100% reliable, and as such, this product should not be used in situations in which life and/or valuables are solely dependent on its function. Lock the MultiSensor main unit to its battery cover by aligning the Lock/Unlock Half-Dimple Markers under the “unlock” symbol and twisting the battery cover from the main unit in a clockwise motion until the Lock/Unlock Half-Dimple Markers form a circle under the “lock” symbol (a tangible click will be felt). Battery Cover Locked Technical Specs Main Unit · MultiSensor Physical Installation Instructions: There are 2 methods to physically mount the MultiSensor on the wall or ceiling. It can be mounted flat against the wall via the Back-Mount Plate or angled in a direction via the Back-Mount Arm. Important: The MultiSensor is weatherized and can operate outdoors in rain and snow. Placed outdoors where directly exposed to rain and snow, the MultiSensor should be oriented such that the Temperature/Humidity Sensor is facing downward and positioned on the bottom of the unit. (See the Weatherization Orientation section.) Mounting the MultiSensor flat against the wall via the Back-Mount Plate. Ceiling Back Mount Plate Mounting the MultiSensor angled in a direction via the Back-Mount Arm. · MultiSensor Physical Instructions: Lock/Unlock Half-Dimple Markers Motion Sensing Window LED Recommendation: For networks which do not have a method to display the battery level of the Aeotec MultiSensor, it is recommended that the sensor be tested occasionally to ensure that the battery still hold enough charge to operate. Batteries naturally lose their charge over time. · Motion Sensor Effective Range: Sensitivity Knob This Side Celling UP Back Mount Arm OPEN CLOSE Temperature/ Humidity Sensor Introduction: By taking advantage of the Z-Wave mesh network, commands can be routed to their destination via intermediary “listening” Z-Wave products. Products that are Z-Wave certified can be used and communicate with other Z-Wave certified devices. rs The Aeotec MultiSensor has built in battery level detection. It will automatically report its battery level to the associated gateway throughout its life until the battery is fully drained and needs replacing. The battery status will often be displayed in the user interface of the gateway. When used properly in an optimized Z-Wave network, operation via battery can function for 12 months before battery replacement. Unlock the MultiSensor from it’s battery cover by twisting the battery cover from the main unit in a counter-clockwise motion and pulling the battery cover outward to separate the main unit from the battery cover. Battery Cover 3.5 0.5 meter Recommendation: For best performance, the MultiSensor should NOT be mounted directly on or near metal framing or other large metallic objects. Large metal objects may weaken the radio signal transmitted. ter me · Adjusting the Sensitivity on the MultiSensor 120° Ground 5 meters Main Unit Insert 4 AAA batteries oriented according to the picture located in the battery holder (with the negative end depressing the battery spring). Water can enter humidity sensor Unlocked AAA AAA AAA Sensitivity Knob AAA Sensitivity Turn the Sensitivity Knob in a clockwise direction to increase sensitivity and counter-clockwise to decrease sensitivity. Sensitivity · Weatherization Orientation: Wall · MultiSensor Power Instructions: Package Contents: Back Mount Plate Note: The Back-Mount Arm may be locked in various angles by turning the Friction Lock clockwise and counter-clockwise to tighten or loosen (respectively) the angle of the arm. Friction Lock Tighten/Loosen Friction Lock 10 meters Back Mount Arm 2.5 meters Indoor/Outdoor functional tolerances allow the Aeotec MultiSensor to function under weatherized conditions. Various sensitivity levels can be configured to avoid unintentional triggering from small animals such as cats and dogs. Back Mount Hook Back Mount Plate Battery Holder The Aeotec MultiSensor is a USB or battery-powered Z-Wave motion sensor, temperature sensor, humidity sensor, and lighting sensor all in one package. The sensor will send radio signals to up to 6 associated Z-Wave devices within its own Z-Wave network when the Motion Sensor detects IR changes in front of its viewing window. Ground ete USB Power Port 6m (Z-Wave 4-in-1 Sensor: Motion, Temperature, Humidity, and Light Sensor) 1) MultiSensor 2) Back-Mount Plate 3) Back-Mount Arm 4) AAA Batteries (x4) 5) USB Cable 6) Screws (x2) 3 meters Z-Wave Button MultiSensor AAA CORRECT WRONG AAA AAA AAA Removing/Resetting the MultiSensor from your Z-Wave Network Press the button labeled “Remove” on the Aeotec Minimote to begin the Z-Wave removal process. Z-Wave Network Instructions: ov The Aeotec MultiSensor must be paired (included) into a Z-Wave network before it can send Basic Set Command, Temperature, Humidity, and Light level reports to association group 1, which is setup via the Association Command class. The MultiSensor can only communicate to devices within its own Z-Wave network. Note: The LED on the MultiSensor will blink if it is currently not paired into a Z-Wave network when pressing the Z-Wave Button. Adding/Including/Pairing the MultiSensor into a Z-Wave Network arn Le te ia oc As Remove Note: To remove the MultiSensor from other controllers, please consult the operation manual for these controllers on how to remove Z-Wave products from an existing network. Troubleshooting: If the MultiSensor was successfully removed from the Z-Wave network, pressing the Z-Wave Button will cause the LED to blink. If the MultiSensor was not successfully removed from the Z-Wave network the LED will stay solid for a few seconds. Press the button labeled “Include” on the Aeotec Minimote to begin the Z-Wave inclusion process. Re de Monitoring Motion arn clu Le te cia so As Include Note: To include the MultiSensor with other controllers, please consult the operation manual for these controllers on how to include Z-Wave products into an existing network. Press the Z-Wave Button under the Battery Cover to begin the Z-Wave pairing process. Z-Wave Button The MultiSensor can send Basic Set Command to association group 1, which is setup via the Association Command Class, when the Motion Sensor detects movement to control the associated devices to “OPEN” state. After 4 minutes by default, if the Motion Sensor is not triggered again, the MultiSensor will send Basic Set Command to these devices to set them to their “CLOSE” state. However, if the Motion Sensor is triggered again in 4 minutes, the MultiSensor will reset the timing and start timing again. The 4 minutes delay time can be changed through the usage of Z-Wave command built into Z-Wave certified controllers/gateways. (The specific Z-Wave command supporting this function is Configuration Command Class) Please consult the operation manual for these controllers / gateways for specific instructions on setting the MultiSensor. Sensitivity AAA AAA AAA AAA Troubleshooting: If the MultiSensor was not successfully paired into any Z-Wave network, the MultiSensor’s LED will blink when pressing the Z-Wave Button. If the MultiSensor was successfully paired into a Z-Wave network, the LED will stay solid for a few seconds when pressing the Z-Wave Button. Aeon Labs warrants to the original purchaser of Products that for the Warranty Period (as defined below), the Products will be free from material defects in materials and workmanship. The foregoing warranty is subject to the proper installation, operation and maintenance of the Products in accordance with installation instructions and the operating manual supplied to Customer. Warranty claims must be made by Customer in writing within thirty (30) days of the manifestation of a problem. Aeon Labs’ sole obligation under the foregoing warranty is, at Aeon Labs’ option, to repair, replace or correct any such defect that was present at the time of delivery, or to remove the Products and to refund the purchase price to Customer. Monitoring Temperature, Humidity and Luminance The MultiSensor can report temperature, humidity, and luminance to a Z-Wave gateway or controller when requested. If this function is supported by the gateway/controller, the data will be displayed in the user interface of the gateway/controller. (The specific Z-Wave command supporting the monitoring is the Multilevel Sensor Command Class and Multi Channel Command Class. Automatic reports are sent to association group 1, which is setup via the Association Command Class.) Please consult the operation manual for these gateways/controllers for specific instructions on setting the MultiSensor. THE INDEMNITY AND WARRANTY IN ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER INDEMNITIES OR WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. FCC NOTICE (for USA): THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. The "Warranty Period" begins on the date the Products is delivered and continues for 12 months. STORE INDOORS WHEN NOT IN USE. SUITABLE FOR DRY LOCATIONS. DO NOT IMMERSE IN WATER. NOT FOR USE WHERE DIRECTLY EXPOSED TO WATER. Any repairs under this warranty must be conducted by an authorized Aeon Labs service representative and under Aeon Labs’ RMA policy. Any repairs conducted by unauthorized persons shall void this warranty. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: Excluded from the warranty are problems due to accidents, acts of God, civil or military authority, civil disturbance, war, strikes, fires, other catastrophes, misuse, misapplication, storage damage, negligence, electrical power problems, or modification to the Products or its components. Aeon Labs does not authorize any person or party to assume or create for it any other obligation or liability in connection with the Products except as set forth herein. Aeon Labs will pass on to Customer all manufacturers’ Material warranties to the extent that they are transferable, but will not independently warrant any Material. ov In Re de clu In Warranty Customer must prepay shipping and transportation charges for returned Products, and insure the shipment or accept the risk of loss or damage during such shipment and transportation. Aeon Labs will ship the repaired or replacement products to Customer freight prepaid. Customer shall indemnify, defend, and hold Aeon Labs and Aeon Labs’ affiliates, shareholders, directors, officers, employees, contractors, agents and other representatives harmless from all demands, claims, actions, causes of action, proceedings, suits, assessments, losses, damages, liabilities, settlements, judgments, fines, penalties, interest, costs and expenses (including fees and disbursements of counsel) of every kind (i) based upon personal injury or death or injury to property to the extent any of the foregoing is proximately caused either by a defective product (including strict liability in tort) or by the negligent or willful acts or omissions of Customer or its officers, employees, subcontractors or agents, and/or (ii) arising from or relating to any actual or alleged infringement or misappropriation of any patent, trademark, mask work, copyright, trade secret or any actual or alleged violation of any other intellectual property rights arising from or in connection with the products, except to the extent that such infringement exists as a result of Aeon Labs’ manufacturing processes. IN NO EVENT SHALL AEON LABS BE LIABLE FOR ANY INDIRECT, INCIDENTAL, PUNITIVE, SPECIAL OR CONSEQUENTIAL DAMAGES, OR DAMAGES FOR LOSS OF PROFITS, REVENUE, OR USE INCURRED BY CUSTOMER OR ANY THIRD PARTY, WHETHER IN AN ACTION IN CONTRACT, OR TORT, OR OTHERWISE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. AEON LABS’ LIABILITY AND CUSTOMER’S EXCLUSIVE REMEDY FOR ANY CAUSE OF ACTION ARISING IN CONNECTION WITH THIS AGREEMENT OR THE SALE OR USE OF THE PRODUCTS, WHETHER BASED ON NEGLIGENCE, STRICT LIABILITY, BREACH OF WARRANTY, BREACH OF AGREEMENT, OR EQUITABLE PRINCIPLES, IS EXPRESSLY LIMITED TO, AT AEOTEC’S OPTION, REPLACEMENT OF, OR REPAYMENT OF THE PURCHASE PRICE FOR THAT PORTION OF PRODUCTS WITH RESPECT TO WHICH DAMAGES ARE CLAIMED. ALL CLAIMS OF ANY KIND ARISING IN CONNECTION WITH THIS AGREEMENT OR THE SALE OR USE OF PRODUCTS SHALL BE DEEMED WAIVED UNLESS MADE IN WRITING WITHIN THIRTY (30) DAYS FROM AEON LABS’ DELIVERY, OR THE DATE FIXED FOR DELIVERY IN THE EVENT OF NONDELIVERY. 1. This device may not cause harmful interference, and 2.This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: •Reorient or relocate the receiving antenna. •Increase the separation between the equipment and receiver. •Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. •Consult the dealer or an experienced radio/TV technician for help. Warning: Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities. Contact your local government for information regarding the collection systems available. Certifications (regional): Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities. Contact your local government for information regarding the collection systems available. FCC NOTE: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. FCC Information: Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to this equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the radio or television off and on, the user is encouraged to try to correct interference by one or more of the following measures. . Reorient or relocate the receiving antenna. . Increase the separation between the equipment and receiver. . Connect the equipment into an outlet on another circuit. . Consult the dealer or an experienced radio/TV technician for help.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Format : application/pdf Title : Multisensor-manual-V10 Metadata Date : 2012:06:21 11:59:29+08:00 Modify Date : 2012:06:21 11:59:29+08:00 Create Date : 2012:05:30 14:00:47+08:00 Creator Tool : Adobe Illustrator CS5 Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Format : JPEG Thumbnail Image : (Binary data 22367 bytes, use -b option to extract) Instance ID : uuid:dd90c27b-c19c-458c-8d9c-61ccf3013db3 Document ID : xmp.did:2CCCB9CA1CAAE1118F52903E760029A6 Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : uuid:9a7b4fd8-c070-41fd-ae99-9a4705721b6f Derived From Document ID : xmp.did:5FB4D90C9EA8E111993EBA9C8AF8B3E6 Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : converted, saved, converted, converted, saved, saved, saved, saved, saved, converted, saved, converted, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, converted, saved, converted, saved, converted, saved, converted, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Params : from application/pdf toEXIF Metadata provided by EXIF.toolsHistory Instance ID : xmp.iid:D27F11740720681191099C3B601C4548, xmp.iid:F97F1174072068118D4ED246B3ADB1C6, xmp.iid:FA7F1174072068118D4ED246B3ADB1C6, xmp.iid:EF7F117407206811A46CA4519D24356B, xmp.iid:F07F117407206811A46CA4519D24356B, xmp.iid:F77F117407206811BDDDFD38D0CF24DD, xmp.iid:F97F117407206811BDDDFD38D0CF24DD, xmp.iid:FA7F117407206811BDDDFD38D0CF24DD, xmp.iid:FB7F117407206811BDDDFD38D0CF24DD, xmp.iid:FC7F117407206811BDDDFD38D0CF24DD, xmp.iid:FD7F117407206811BDDDFD38D0CF24DD, xmp.iid:FE7F117407206811BDDDFD38D0CF24DD, xmp.iid:B233668C16206811BDDDFD38D0CF24DD, xmp.iid:B333668C16206811BDDDFD38D0CF24DD, xmp.iid:B433668C16206811BDDDFD38D0CF24DD, xmp.iid:F77F11740720681197C1BF14D1759E83, xmp.iid:F87F11740720681197C1BF14D1759E83, xmp.iid:F97F11740720681197C1BF14D1759E83, xmp.iid:FA7F117407206811B628E3BF27C8C41B, xmp.iid:FF7F117407206811B628E3BF27C8C41B, xmp.iid:07C3BD25102DDD1181B594070CEB88D9, xmp.iid:F87F1174072068119098B097FDA39BEF, xmp.iid:F77F117407206811BB1DBF8F242B6F84, xmp.iid:F97F117407206811ACAFB8DA80854E76, xmp.iid:0180117407206811834383CD3A8D2303, xmp.iid:01E540664A3DDD11BD33D3EB8D3A1068, xmp.iid:6B6AE2A5723EDD11A6F1BABF7C5A7A51, xmp.iid:23383BFEA441DD11A6AECB58D53C8B28, xmp.iid:086F577ABE41DD11A6AECB58D53C8B28, xmp.iid:AB13E98E200911689FE8CB9EA85C5459, xmp.iid:93D9A2DF7848DD11BB47877F8DDF9079, xmp.iid:FA7F117407206811B34B80FC905F8DB1, xmp.iid:F77F11740720681197A5C6DA8C2593EE, xmp.iid:F87F11740720681197A5C6DA8C2593EE, xmp.iid:E6E60D8E933DE111AE93DA002C99B67A, xmp.iid:22E27B4EA041E1118138AC40BF45D7E3, xmp.iid:133476B53158E11180D29BA63875C520, xmp.iid:E119ECD14C68E111A9C395F4349911E1, xmp.iid:C9FCD8A6FB95E1118340F5CD5CF385AD, xmp.iid:34AB5DCF499BE111ADFD9A9F78D6E3C1, xmp.iid:400AADDDE29BE11184A38A5E7203B30D, xmp.iid:5FB4D90C9EA8E111993EBA9C8AF8B3E6, xmp.iid:2CCCB9CA1CAAE1118F52903E760029A6 History When : 2008:04:17 14:19:15+05:30, 2008:05:15 16:23:06-07:00, 2008:05:15 17:10:45-07:00, 2008:05:15 22:53:33-07:00, 2008:05:15 23:07:07-07:00, 2008:05:16 10:35:43-07:00, 2008:05:16 10:40:59-07:00, 2008:05:16 11:26:55-07:00, 2008:05:16 11:29:01-07:00, 2008:05:16 11:29:20-07:00, 2008:05:16 11:30:54-07:00, 2008:05:16 11:31:22-07:00, 2008:05:16 12:23:46-07:00, 2008:05:16 13:27:54-07:00, 2008:05:16 13:46:13-07:00, 2008:05:16 15:47:57-07:00, 2008:05:16 15:51:06-07:00, 2008:05:16 15:52:22-07:00, 2008:05:22 13:28:01-07:00, 2008:05:22 16:23:53-07:00, 2008:05:28 16:45:26-07:00, 2008:06:02 13:25:25-07:00, 2008:06:09 14:58:36-07:00, 2008:06:11 14:31:27-07:00, 2008:06:11 22:37:35-07:00, 2008:06:18 22:24:01+07:00, 2008:06:19 20:30:34-07:00, 2008:06:24 14:13:53+08:00, 2008:06:24 15:23:44+08:00, 2008:06:26 06:03:48-07:00, 2008:07:02 13:54:27-07:00, 2008:07:21 16:58:31+05:30, 2008:09:05 03:21:29-07:00, 2008:09:05 04:21:56-07:00, 2012:01:13 16:51:52+08:00, 2012:01:18 15:24:56+08:00, 2012:02:16 09:34:15+08:00, 2012:03:07 19:58:14+08:00, 2012:05:04 23:13:06+08:00, 2012:05:11 17:28:27+08:00, 2012:05:12 15:13:07+08:00, 2012:05:28 16:20:57+08:00, 2012:05:30 14:00:43+08:00 History Software Agent : Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5 History Changed : /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, / Startup Profile : Print Has Visible Overprint : False Has Visible Transparency : True N Pages : 1 Max Page Size W : 28.499983 Max Page Size H : 21.000027 Max Page Size Unit : Centimeters Font Name : Calibri, Arial-BoldMT, ArialMT, AdobeSongStd-Light Font Family : Calibri, Arial, Arial, Adobe 宋体 Std Font Face : Regular, Bold, Regular, L Font Type : Open Type, Open Type, Open Type, Open Type Font Version : Version 5.62, Version 5.06, Version 5.06, Version 5.002;PS 5.002;hotconv 1.0.49;makeotf.lib2.0.15106 Font Composite : False, False, False, False Font File Name : CALIBRI.TTF, arialbd.ttf, arial.ttf, AdobeSongStd-Light.otf Plate Names : Cyan, Magenta, Yellow, Black Swatch Group Name : 默认色板组, 灰度, 鲜艳 Swatch Group Type : 0, 1, 1 Swatch Colorant Swatch Name : 白色, 黑色, CMYK 红, CMYK 黄, CMYK 绿, CMYK 青, CMYK 蓝, CMYK 洋红, C=15 M=100 Y=90 K=10, C=0 M=90 Y=85 K=0, C=0 M=80 Y=95 K=0, C=0 M=50 Y=100 K=0, C=0 M=35 Y=85 K=0, C=5 M=0 Y=90 K=0, C=20 M=0 Y=100 K=0, C=50 M=0 Y=100 K=0, C=75 M=0 Y=100 K=0, C=85 M=10 Y=100 K=10, C=90 M=30 Y=95 K=30, C=75 M=0 Y=75 K=0, C=80 M=10 Y=45 K=0, C=70 M=15 Y=0 K=0, C=85 M=50 Y=0 K=0, C=100 M=95 Y=5 K=0, C=100 M=100 Y=25 K=25, C=75 M=100 Y=0 K=0, C=50 M=100 Y=0 K=0, C=35 M=100 Y=35 K=10, C=10 M=100 Y=50 K=0, C=0 M=95 Y=20 K=0, C=25 M=25 Y=40 K=0, C=40 M=45 Y=50 K=5, C=50 M=50 Y=60 K=25, C=55 M=60 Y=65 K=40, C=25 M=40 Y=65 K=0, C=30 M=50 Y=75 K=10, C=35 M=60 Y=80 K=25, C=40 M=65 Y=90 K=35, C=40 M=70 Y=100 K=50, C=50 M=70 Y=80 K=70, AutoCAD Color 3, AutoCAD Color, AutoCAD Color 1, AutoCAD Color 2, PANTONE 285 C, PANTONE 2925 C, PANTONE 288 C, C=0 M=0 Y=0 K=100, C=0 M=0 Y=0 K=90, C=0 M=0 Y=0 K=80, C=0 M=0 Y=0 K=70, C=0 M=0 Y=0 K=60, C=0 M=0 Y=0 K=50, C=0 M=0 Y=0 K=40, C=0 M=0 Y=0 K=30, C=0 M=0 Y=0 K=20, C=0 M=0 Y=0 K=10, C=0 M=0 Y=0 K=5, C=0 M=100 Y=100 K=0, C=0 M=75 Y=100 K=0, C=0 M=10 Y=95 K=0, C=85 M=10 Y=100 K=0, C=100 M=90 Y=0 K=0, C=60 M=90 Y=0 K=0 Swatch Colorant Mode : CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK Swatch Colorant Type : PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, SPOT, SPOT, SPOT, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS Swatch Colorant Cyan : 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 100.000000, 100.000000, 0.000000, 14.999998, 0.000000, 0.000000, 0.000000, 0.000000, 5.000001, 19.999999, 50.000000, 75.000000, 84.999996, 90.000004, 75.000000, 80.000001, 69.999999, 84.999996, 100.000000, 100.000000, 75.000000, 50.000000, 35.000002, 10.000002, 0.000000, 25.000000, 39.999998, 50.000000, 55.000001, 25.000000, 30.000001, 35.000002, 39.999998, 39.999998, 50.000000, 79.162300, 92.971700, 28.540501, 0.003100, 88.999999, 84.999996, 100.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 84.999996, 100.000000, 60.000002 Swatch Colorant Magenta : 0.000000, 0.000000, 100.000000, 0.000000, 0.000000, 0.000000, 100.000000, 100.000000, 100.000000, 90.000004, 80.000001, 50.000000, 35.000002, 0.000000, 0.000000, 0.000000, 0.000000, 10.000002, 30.000001, 0.000000, 10.000002, 14.999998, 50.000000, 94.999999, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 94.999999, 25.000000, 44.999999, 50.000000, 60.000002, 39.999998, 50.000000, 60.000002, 64.999998, 69.999999, 69.999999, 73.778898, 87.972802, 22.385000, 96.020401, 42.999998, 23.999999, 66.999996, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 75.000000, 10.000002, 10.000002, 90.000004, 90.000004 Swatch Colorant Yellow : 0.000000, 0.000000, 100.000000, 100.000000, 100.000000, 0.000000, 0.000000, 0.000000, 90.000004, 84.999996, 94.999999, 100.000000, 84.999996, 90.000004, 100.000000, 100.000000, 100.000000, 100.000000, 94.999999, 75.000000, 44.999999, 0.000000, 0.000000, 5.000001, 25.000000, 0.000000, 0.000000, 35.000002, 50.000000, 19.999999, 39.999998, 50.000000, 60.000002, 64.999998, 64.999998, 75.000000, 80.000001, 90.000004, 100.000000, 80.000001, 71.401501, 89.019603, 21.448100, 94.604397, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 100.000000, 94.999999, 100.000000, 0.000000, 0.003099 Swatch Colorant Black : 0.000000, 100.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 10.000002, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 10.000002, 30.000001, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 25.000000, 0.000000, 0.000000, 10.000002, 0.000000, 0.000000, 0.000000, 5.000001, 25.000000, 39.999998, 0.000000, 10.000002, 25.000000, 35.000002, 50.000000, 69.999999, 45.102599, 79.998499, 0.003100, 0.003100, 0.000000, 0.000000, 22.999999, 100.000000, 89.999402, 79.998797, 69.999701, 59.999102, 50.000000, 39.999402, 29.998803, 19.999701, 9.999102, 4.998803, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.003099 Swatch Colorant Tint : 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000 Producer : Adobe PDF library 9.90 Page Count : 3 Creator : Adobe Illustrator(R) 15.0 For : Li Jianhui, Bounding Box : 18 -640 1254 604 Container Version : 11 Creator Version : 15