Aeon Labs DSB09104 Home Energy Meter User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1279688
Application ID	de1esA2dvmOYi6H7/MkcWA==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	11.36kB (141960 bits)
Date Submitted	2010-05-11 00:00:00
Date Available	2010-05-11 00:00:00
Creation Date	2010-05-10 12:25:22
Producing Software	Foxit PDF Creator Version 2.0.0 build 0725
Document Lastmod	2010-05-10 15:02:00
Document Title	Microsoft Word - Instructions - Aeon Labs Home Energy Meter.doc
Document Creator	C:\Program Files\Microsoft Office\OFFICE11\WINWORD.EXE
Document Author:	Administrator

Z-Wave Network Instructions:
-1The Aeon Labs Home Energy Meter must be paired (included)
into a Z-Wave network before it can receive Z-Wave
commands to report its energy usage. The home energy
meter can only communicate to devices within it’s own zwave network.
Aeon Labs Home Energy Meter
(Z-Wave Home Energy Meter)
Note: If the Home Energy Meter is not currently paired into a
Z-Wave network, the LED on the Home Energy Meter will
blink after pressing the button located near the batteries.
2.
Troubleshooting: If the Aeon Labs Home Energy Meter was
not successfully included into any Z-Wave network, the LED
will blink after pressing the button near the batteries. If the
Aeon Labs Home Energy Meter was successfully included to a
Z-Wave network, the LED will be lit solid after pressing the
button.
Adding/Including/Pairing the Home Energy Meter
into a Z-Wave Network
1.
Press the button on the Aeon Labs Z-Stick to begin the
Z-Wave inclusion process.
2.
1.
Removing/Resetting the Home Energy Meter from
your Z-Wave Network
Hold the button on the Aeon Labs Z-Stick to begin the
Z-Wave removal process.
After placing 4 AA batteries into the Home Energy
Meter, press the button located near the batteries .
-3-
Troubleshooting: If the Aeon Labs Home Energy Meter was
removed from the Z-Wave network, the LED will blink after
pressing the button near the batteries. If the Aeon Labs
Home Energy Meter was not successfully removed from a ZWave network, the LED will be lit solid after pressing the
button.
•
•
•
After placing 4 AA batteries into the Home Energy
Meter, press the button located near the batteries .
-2-
Monitoring Energy Consumption
The Aeon Labs Home Energy Meter can report wattage
energy usage or kWh energy usage to a Z-Wave gateway or
controller when requested. If this function is supported by
the gateway/controller, the energy consumption will be
displayed in the user interface of the gateway/controller.
(The specific Z-Wave commands supporting energy
monitoring are the Meter Command Class and Multilevel
Sensor Command Class.) Please consult the operation
manual for these gateways/controllers for specific
instructions on monitoring the Home Energy Meter.
OR
OR
Accessory:::CCCU
URRRRRREEEN
NTTTTTTRRRAAAN
NSSSFFFO
ORRRM
MAAATTTO
ORRR
Press the button labeled “Include” on the Aeon Labs
Minimote to begin the Z-Wave inclusion process.
Press the button labeled “Remove” on the Aeon Labs
Minimote Stick to begin the Z-Wave removal process.
Introduction:
The Aeon Labs Home Energy Meter is a low-cost energy
meter for the entire home. It can wirelessly report
immediate wattage and kWh usage of the AC mains to a ZWave gateway.
By taking advantage of the Z-Wave mesh network,
commands can be routed to their destination via
intermediary “listening” Z-Wave products. Products that are
Z-Wave certified can be used and communicate with other ZWave certified devices.
-1-
Note: To include the Aeon Labs Home Energy Meter
with other controllers, please consult the operation
manual for these controllers on how to include Z-Wave
products into an existing network. For instructions on
select
partner
gateways,
visit
www.aeonlabs.com/support.
-2-
Note: To include the Aeon Labs Home Energy Meter
with other controllers, please consult the operation
manual for these controllers on how to include Z-Wave
products into an existing network. For instructions on
select
partner
gateways,
visit
www.aeonlabs.com/support.
-3-
-4-
Warranty
Aeon Labs warrants to the original purchaser of Products
that for the Warranty Period (as defined below), the Products
will be free from material defects in materials and
workmanship. The foregoing warranty is subject to the
proper installation, operation and maintenance of the
Products in accordance with installation instructions and the
operating manual supplied to Customer. Warranty claims
must be made by Customer in writing within thirty (30) days
of the manifestation of a problem. Aeon Labs' sole obligation
under the foregoing warranty is, at Aeon Labs' option, to
repair, replace or correct any such defect that was present at
the time of delivery, or to remove the Products and to refund
the purchase price to Customer.
The "Warranty Period" begins on the date the Products is
delivered and continues for 12 months.
Any repairs under this warranty must be conducted by an
authorized Aeon Labs service representative and under Aeon
Labs’ RMA policy. Any repairs conducted by unauthorized
persons shall void this warranty.
Excluded from the warranty are problems due to accidents,
acts of God, civil or military authority, civil disturbance, war,
strikes, fires, other catastrophes, misuse, misapplication,
storage damage, negligence, electrical power problems, or
modification to the Products or its components.
Aeon Labs does not authorize any person or party to assume
or create for it any other obligation or liability in connection
with the Products except as set forth herein.
Aeon Labs will pass on to Customer all manufacturers’
Material warranties to the extent that they are transferable,
but will not independently warrant any Material.
Customer must prepay shipping and transportation charges
for returned Products, and insure the shipment or accept the
risk of loss or damage during such shipment and
transportation. Aeon Labs will ship the repaired or
replacement products to Customer freight prepaid.
proceedings, suits, assessments, losses, damages, liabilities,
settlements, judgments, fines, penalties, interest, costs and
expenses (including fees and disbursements of counsel) of
every kind (i) based upon personal injury or death or injury to
property to the extent any of the foregoing is proximately
caused either by a defective product (including strict liability
in tort) or by the negligent or willful acts or omissions of
Customer or its officers, employees, subcontractors or
agents, and/or (ii) arising from or relating to any actual or
alleged infringement or misappropriation of any patent,
trademark, mask work, copyright, trade secret or any actual
or alleged violation of any other intellectual property rights
arising from or in connection with the products, except to the
extent that such infringement exists as a result of Aeon
Labs‘ manufacturing processes.
IN NO EVENT SHALL AEON LABS BE LIABLE FOR ANY
INDIRECT,
INCIDENTAL,
PUNITIVE,
SPECIAL
OR
CONSEQUENTIAL DAMAGES, OR DAMAGES FOR LOSS OF
PROFITS, REVENUE, OR USE INCURRED BY CUSTOMER OR
ANY THIRD PARTY, WHETHER IN AN ACTION IN CONTRACT,
OR TORT, OR OTHERWISE EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. AEON LABS’ LIABILITY AND
CUSTOMER’S EXCLUSIVE REMEDY FOR ANY CAUSE OF
ACTION ARISING IN CONNECTION WITH THIS AGREEMENT
OR THE SALE OR USE OF THE PRODUCTS, WHETHER BASED
ON NEGLIGENCE, STRICT LIABILITY, BREACH OF WARRANTY,
BREACH OF AGREEMENT, OR EQUITABLE PRINCIPLES, IS
EXPRESSLY LIMITED TO, AT AEON LABS’ OPTION,
REPLACEMENT OF, OR REPAYMENT OF THE PURCHASE
PRICE FOR THAT PORTION OF PRODUCTS WITH RESPECT TO
WHICH DAMAGES ARE CLAIMED. ALL CLAIMS OF ANY KIND
ARISING IN CONNECTION WITH THIS AGREEMENT OR THE
SALE OR USE OF PRODUCTS SHALL BE DEEMED WAIVED
UNLESS MADE IN WRITING WITHIN THIRTY (30) DAYS FROM
AEON LABS’S DELIVERY, OR THE DATE FIXED FOR DELIVERY
IN THE EVENT OF NONDELIVERY.
FCC NOTICE (for USA):
Warning:
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO
OR TV INTERFERENCE CAUSED BY UNAUTHORIZED
MODIFICATIONS
TO
THIS
EQUIPMENT.
SUCH
MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO
OPERATE THE EQUIPMENT.
Do not dispose of electrical appliances as unsorted municipal
waste, use separate collection facilities.
Contact your local government for information regarding the
collection systems available.
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
1.
This device may not cause harmful interference, and
2.
This device must accept any interference received,
including interference that may cause undesired
operation
Certifications (regional):
Any Changes or modifications not expressly approved
by the party responsible for compliance could void the
user's authority to operate the equipment.
Note:
Z-Stick FCCID: XBA20090807
Minimote FCCID: XBA20090818
Harmonizing the Smart Home.
www.aeon-labs.com
THE INDEMNITY AND WARRANTY IN ABOVE ARE EXCLUSIVE
AND IN LIEU OF ALL OTHER INDEMNITIES OR WARRANTIES,
WHETHER EXPRESS OR IMPLIED, INCLUDING THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE.
Customer shall indemnify, defend, and hold Aeon Labs and
Aeon Labs’ affiliates, shareholders, directors, officers,
employees, contractors, agents and other representatives
harmless from all demands, claims, actions, causes of action,
-5-
-6-
-7-
-8-

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Create Date                     : 2010:05:10 12:25:22+08:00
Creator Tool                    : C:\Program Files\Microsoft Office\OFFICE11\WINWORD.EXE
Modify Date                     : 2010:05:10 15:02-07:00
Metadata Date                   : 2010:05:10 15:02-07:00
Format                          : application/pdf
Creator                         : Administrator
Title                           : Microsoft Word - Instructions - Aeon Labs Home Energy Meter.doc
Producer                        : Foxit PDF Creator Version 2.0.0 build 0725
Document ID                     : uuid:98fd91c4-a23c-44bd-99c3-eba6388b3e86
Instance ID                     : uuid:2f83ab97-7601-4139-a2af-58d10d040399
Page Count                      : 2
Author                          : Administrator

EXIF Metadata provided by EXIF.tools