Aeon Labs K99701 Smart home Bridge User Manual

Aeon Labs LLC. Smart home Bridge 1236090 2 indd

a href="https://usermanual.wiki/Aeon-Labs" itemprop="url"> Aeon Labs >

User Manual

3" (75 mm) x 2" (50 mm) x2-3/4" (70 mm) MinAABAAAAACB1236090-2-A3 45 67 811 2Kohler Co.1236090-2-AIMPORTANT INFORMATION CAUTION: Risk of electric shock. Turn off  the electricity at the circuit breaker before installation.CAUTION: Turn off  the electricity during bulb replacement in a fi xture operated by the K-99700 dimmer switch module.NOTICE: Do not install to a three-way switch.NOTICE: Install using copper conductors only.This product is for use with a DTV+ system. The K-99701 lighting bridge is required.Follow all local electrical and building codes.2A. Turn the electricity OFF.3A. Neutral3B. Line3C. Load4A. Connect the pink wires. Do not use the “3V” terminal.5A. Turn the electricity ON. CAUTION: Risk of electric shock. Avoid touching any wires when pairing.6A. Pair with the lighting bridge according to the guide on the product page at us.kohler.com.7A. Turn the electricity OFF.7B. Position the antenna away from other wires.8A. Turn the electricity ON.INFORMATIONS IMPORTANTES ATTENTION: Risque de choc électrique. Couper l’électricité au niveau du disjoncteur avant l’installation.ATTENTION: Couper l’électricité pendant le remplacement d’ampoule dans un dispositif opéré par le module de commutation du gradateur K-99700.AVIS: Ne pas installer sur un commutateur à trois voies.AVIS: Installer en utilisant les conducteurs en cuivre seulement.Ce produit est destiné à être utilisé avec un système DTV+. Le pont d’éclairage K-99701 est requis.Suivre tous les codes de plomberie et de bâtiment locaux.2A. Couper l’électricité.3A. Neutre3B. Ligne3C. Charge4A. Connecter les fi ls roses. Ne pas utiliser la borne “3V”.5A. Me re l’électricité en marche. ATTENTION: Risque de choc électrique. Éviter de toucher des fi ls pendant l’appariement.6A. Apparier avec le pont d’éclairage selon le guide de la page de produit à us.kohler.com.7A. Couper l’électricité.7B. Positionner l’antenne loin des autres fi ls.8A. Me re l’électricité en marche.INFORMACIÓN IMPORTANTE PRECAUCIÓN: Riesgo de sacudidas eléctricas. Desconecte la electricidad en el interruptor de circuito antes de hacer la instalación.PRECAUCIÓN: Desconecte la electricidad al cambiar el foco en una unidad que tenga un módulo de interruptor atenuador K-99700.AVISO: No instale en un interruptor de tres vías.AVISO: Instale solo con conductores de cobre.Este producto es para ser usado con un sistema DTV+. Se requiere el puente de iluminación K-99701.Cumpla todos los códigos locales eléctricos y de construcción.2A. Corte el suministro eléctrico.3A. Neutro3B. Línea3C. Carga4A. Conecte los cables color rosa. No use el terminal “3V”.5A. Conecte el suministro eléctrico. PRECAUCIÓN: Riesgo de sacudidas eléctricas. Evite tocar los cables al aparear.6A. Aparee con el puente de iluminación de acuerdo a la guía en la página del producto en us.kohler.com.7A. Corte el suministro eléctrico.7B. Coloque la antena alejada de otros cables.8A. Conecte el suministro eléctrico.
Download:
Mirror Download [FCC.gov]
Document ID2857370
Application IDtYapnenu6Yjc1UMLXWa/hQ==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize24.71kB (308934 bits)
Date Submitted2015-12-27 00:00:00
Date Available2015-12-27 00:00:00
Creation Date2015-08-12 12:21:11
Producing SoftwareAcrobat Distiller 9.5.5 (Windows)
Document Lastmod2015-12-25 15:31:02
Document Title1236090-2.indd
Document CreatorPScript5.dll Version 5.2.2
Document Author: ko80447
FCC ID Filing: XBAK99701

Navigation menu