AeroVironment 68460 Digital Data Link Transceiver User Manual OEM Instructions

Download:
Mirror Download [FCC.gov]
Document ID	2959689
Application ID	sDlWAAzaMO6HqmKUodOKyQ==
Document Description	OEM Instructions
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	8.65kB (108078 bits)
Date Submitted	2016-04-14 00:00:00
Date Available	2016-04-14 00:00:00
Creation Date	2016-01-26 15:47:31
Producing Software	GPL Ghostscript 8.15
Document Lastmod	2016-01-26 15:47:31
Document Title	Microsoft Word - OEM_Integration_Instructions-R160126.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Ashker

AeroVironment Modular
Certification
Instructions to OEM
Integrators
Model Number: 68460
FCC ID: PZR-68460
January 26, 2016
The AeroVironment logo is a registered trademark of AeroVironment, Inc. All other trademarks are the property of their
respective holders.
Notice
The information in this document has been carefully reviewed and is believed to be accurate. Nonetheless, this document is
subject to change without notice, and AeroVironment, Inc. (AV) assumes no responsibility for any inaccuracies that may be
contained in this document, and makes no commitment to update or to keep current the contained information, or to notify a
person or organization of any updates. AV reserves the right to make changes, at any time, in order to improve reliability,
function or design and to attempt to supply the best product possible. AV does not represent that products described herein
are free from patent infringement or from any other third party right.
No part of this document may be reproduced, adapted or transmitted in any form or by any means, electronic or mechanical,
for any purpose, except as expressly set forth in a written agreement signed by AV. AV or its affiliates may have patents or
pending patent applications, trademarks, copyrights, or other intellectual property rights that apply to the ideas, material and
information expressed herein. No license to such rights is provided except as expressly set forth in a written agreement signed
by AV.
AV MAKES NO WARRANTIES OF ANY KIND WITH REGARD TO THE CONTENT OF THIS DOCUMENT. IN NO EVENT SHALL AV
BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL SPECULATORY OR CONSEQUENTIAL DAMAGES ARISING FROM
THE USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBLITY OF SUCH
DAMAGES. IN PARTICULAR, ATHEROS SH ALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA
TRANSMITTED OR OTHERWISE USED WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING,
INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE OR DATA. AV SPECIFICALLY DISCLAIMS THE
IM PLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE AS THEY MIGHT OTHERWISE
APPLY TO THIS DOCUMENT AND TO THE IDEAS, MATERIAL AND INFORM ATION EXPRESSED HEREIN.
© 2016 by AeroVironment, Inc. All rights reserved.
AeroVironment®, AVINC®
Page 1 of 5
1 Revision History
Revision
Revision Description of Changes
December
15, 2012
October
21, 2013
December
19, 2013
January
26, 2016
Initial Release
Amended for power limits and antenna guidance
Amended for RF exposure guidance, end user manual statement, and other minor
corrections
Amended to add approved antenna
© 2016 by AeroVironment, Inc. All rights reserved.
AeroVironment®, AVINC®
Page 2 of 5
2 Introduction
This document describes mandatory steps required by the OEM integrator when designing and
manufacturing any host PC system utilizing this AeroVironment radio module (number 68460).
This document lists the mandatory responsibilities and actions of the OEM integrator.
Failure to comply with all requirements and conditions in this document may result in noncompliance of the host device with FCC rules and invalidate the AeroVironment FCC certification for
the module.
This guide applies to modules that act in either the Arbiter, Client, or Viewer roles.
3 Overview
The 68460 mini-DDL transceiver is a communications module that allows communications between
like modules using a star topology DDL session using Time Division Multiple Access and Time
Division Duplexing (TDMA and TDD). It operates in the 2400 MHz ISM bands.
Max. average output power at antenna terminal
5 MHz Bandwidth
Channel Center Frequency
(MHz)
CH001
2415
CH002
2425
CH003
2435
CH004
2445
CH005
2455
Conducted Maximum Average
power (dBm)
26.01
26.01
26.01
26.01
26.01
4 Allowed Antennas to be used with the Radio Module
Table 1 is a list of allowable antennas for use with the specific radio module.
Peak gain including cable losses is quoted in the table.
Use of any antenna in the list (identical or equivalent antenna with lower gain, dimensions and cable
lengths) is acceptable in the host device, without any further FCC testing or submission.
However, use of an antenna that is higher gain than those on the list or is a Different Type, requires
additional testing and submission to the FCC. Therefore, antennas with higher gain or different type
than specified by AeroVironment may not be used with the AeroVironment module until new testing
and reporting is completed.
You must contact the AeroVironment Regulatory Group to report any higher gain or new antenna
type to be used with the module.
Table 1 Approved Antennae
Item
Part Number
70958
ANT-2.4-CW-RH
68856
Manufacturer
AeroVironment
LINX
TECHNOLOGIES
AeroVironment
Type
Dual Patch
Monopole 30 mm
Gain
9 dBi
0 dBi
Broadband Dipole
3 dBi
© 2016 by AeroVironment, Inc. All rights reserved.
AeroVironment®, AVINC®
Page 3 of 5
4.1
Antenna Placement
This 68460 module has been certified by FCC as single module approval with the following
restrictions:
• To satisfy RF exposure requirements, this device and its antenna must operate with a
separation distance of at least 20cm from all persons and must not be co-located or
operating in conjunction with any other antenna or transmitter
• Consult with AeroVironment to determine the allowable rotational orientations for vertical
and horizontal antenna installation in applicable host devices.
If any one of condition listed above can not comply, please consult with AeroVironment regulatory
contact person to determine the applicable equipment authorization procedure before marketing the
host device.
5 Approved Usage
These radio modules can be used in a variety of physical layer configurations; the following restricts
the use to maintain compliance with the above referenced certification bodies.
The user is encouraged to use minimum power required to establish a link, thus minimizing
interference.
Changes or modifications to the module and/or operation outside the limits set forth below are
prohibited and could void the user’s authority to operate the modules.
Uses of these radio modules are limited to the specific register settings that are optimized for
performance and compliance.
6 Product Approval
The 68460 module has been designed to meet most national regulations for worldwide ISM-band
use. In particular, the radio modules have been certified to the following standards.
6.1
USA (Federal Communications Commission, FCC)
The 68460 module, used with the antenna listed in Table 1 above, has been tested to comply with
FCC Part 15 - 15.247 “Intentional Radiators.”
The device meets the requirements for modular transmitter approval as detailed in FCC Part 15 15.212.
The 68460 module can be integrated into a finished product without obtaining subsequent FCC
approvals for intentional radiators.
The module complies with part 15 of the FCC rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
6.1.1 Required Host System Labeling
The Integrator must affix appropriate labeling on the final product.
6.1.1.1FCCID
The 68460 modules have been labeled with their own FCC ID number and if the FCC ID is not visible
when the module is installed inside another device, then the outside of the finished product into
© 2016 by AeroVironment, Inc. All rights reserved.
AeroVironment®, AVINC®
Page 4 of 5
which the module is installed must also display a label referring to the enclosed module. This exterior
label can use wording such as the following:
Contains Transmitter Module FCC ID: PZR-68460
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference,
and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
6.2
End User Manual
The end user manual should include the following statement:
This equipment has been tested and found to comply with the limits for a
class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
* Reorient or relocate the receiving antenna.
* Increase the separation between the equipment and receiver.
* Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
* Consult the dealer or an experienced radio/TV technician for help.
In order to maintain compliance with FCC regulations, shielded cables must
be used with this equipment. Operation with non-approved equipment or
unshielded cables is likely to result in interference to radio and TV reception.
The user is cautioned that changes and modifications made to the equipment
without the approval of manufacturer could void the user's authority to
operate this equipment.
© 2016 by AeroVironment, Inc. All rights reserved.
AeroVironment®, AVINC®
Page 5 of 5

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 5
Producer                        : GPL Ghostscript 8.15
Create Date                     : 2016:01:26 15:47:31
Modify Date                     : 2016:01:26 15:47:31
Title                           : Microsoft Word - OEM_Integration_Instructions-R160126.doc
Creator                         : PScript5.dll Version 5.2.2
Author                          : Ashker

EXIF Metadata provided by EXIF.tools