Agfa Duoscan 1200 Users Manual Owner's Guide

2015-02-05

• Preface
• Chapter 1: Preparing the Scanner
  • Unpacking the Scanner
  • Unlocking the Scanner
    • Autolock
    • Unlocking the Transparency Unit (TPU)
  • Taking a Closer Look
    • The Different Parts of Your Scanner
    • Working with Trays and a Flexible Template
      • Trays
      • Flexible Template
    • Connecting the Transparency Unit (TPU)
• Chapter 2: Installing the Scanner
  • Minimum Hardware and Software Requirements
  • Environmental Requirements
  • Precautions
  • Cleaning Your Scanner
  • SCSI Devices
  • Installation for Mac OS
    • Installation of the Software
    • Which SCSI Interface Card
    • Choosing a SCSI ID Number
    • Connecting the Scanner
      • If your Arcus 1200 is the only external SCSI device to be connected to your Apple Macintosh:
      • If your Arcus 1200 will be connected to your Apple Macintosh together with other external SCSI devices:
      • If your scanner is the first external device of your SCSI chain
      • If you install the scanner between two other external SCSI devices
    • Testing the Scanner and the Connection
  • Installation for Windows
    • Installation of the Software
    • Which SCSI Interface Card
    • Choosing a SCSI ID Number
    • Connecting the Scanner
      • If your PC has a high density connector:
      • If your PC has a 25-pin connector and your Arcus 1200 is the only external SCSI device to be connected to your PC:
      • If your PC has a 25-pin connector and your Arcus 1200 will be connected to your PC together with other external SCSI devices:
      • If your scanner is the first external device of your SCSI chain
      • If you install the scanner between two other external SCSI devices
      • If your PC has a 50-pin connector and your Arcus 1200 is the only external SCSI device to be connected to your PC:
      • If your PC has a 50-pin connector and your Arcus 1200 will be connected to your PC together with other external SCSI devices:
      • If your scanner is the first external device of your SCSI chain
      • If you install the scanner between two other external SCSI devices
    • Testing the Scanner and the Connection
• Chapter 3: Placing Originals
  • Changing Removable Trays
  • Placing Reflective Originals
  • Placing Transparent Originals
    • Using the Glass Plate and the Flexible Template
    • Using the Batch Slide Holders
      • 35 mm framed (6) and 4 x 5 inch (1) batch slide holder
      • 35 mm strip (1) and 6 x 9 cm (2) batch slide holder
• Appendix A: Troubleshooting
  • The power indicator fails to light up.
  • The power indicator lights up but nothing happens.
  • The scanner makes a loud knocking noise and the optical carriage does not move under the glass plate.
  • The progress indicator light on the scanner's operating panel remains blinking after the power-up sequence (= about 25 seconds).
  • The workstation does not start up. If your workstation is an Apple Macintosh a little floppy disk with a question mark appears on your screen.
  • The scanner software cannot find the scanner.
  • Your original fell into the scanner.
  • An error message appears while you scan transparencies.
  • The TPU is not working.
  • The TPU cannot be opened.
  • The TPU option is not selectable in the software.
• Appendix B: Technical Information
• Appendix C: Arcus 1200 Regulation Compliance
  • Safety Regulations
    • UL Safety Statement
    • TÜV: Wichtige Sicherheitshinweise
  • Electromagnetic Compatibility
    • Federal Communications Commission Radio Frequency Interference Statement.
    • Canadian Department of Communications