Agilent Technologies Portable Generator N3300A Users Manual User's Guide

2015-02-02

• Warranty Information
• Safety Summary
• Declaration Page
• Acoustic Noise Information
• Printing History
• Table of Contents
• Quick Reference
  • The Front Panel -At a Glance
  • The Rear Panel At a Glance
  • Instrument Configuration
  • Front Panel Number Entry
  • Front Panel Annunciators
  • Immediate Action Keys
  • Front Panel Menus - At a Glance
  • SCPI Programming Commands - At a Glance
• General Information
  • Document Orientation
  • Safety Considerations
  • Options and Accessories
  • Description
    • Features and Capabilities
    • Front Panel Controls
    • Remote Programming
  • Operating Modes
    • Constant Current CC (Mode)
    • Constant Resistance (CR) Mode
    • Constant Voltage (CV) Mode
  • Transient Operation
  • List Operation
  • Triggered Operation
  • Input Control
  • Protection Features
  • Saving and Recalling Settings
  • External Control Signals
    • Remote Sensing
    • Monitor Outputs
    • External Programming Input
    • Fault
    • Port On/Off
  • Input Measurements
    • DC Measurements
    • RMS Measurements
    • Minimum and Maximum Measurements
    • Power Measurements
    • Measurement Ranges
• Installation
  • Inspection
    • Damage
    • Packaging Material
    • Items Supplied
    • Cleaning
  • Installing the Modules
    • Procedure
    • Channel Number
  • Location
    • Bench Operation
    • Rack Mounting
  • Input Connections
    • Power Cord
    • Manually-Tightened Connectors
    • 8mm Screw Terminal Connector (option UJ1)
    • Wire Considerations
    • Control Connector
    • Sense Switch
    • Trigger and Digital Connections
  • Computer Connections
    • GPIB Interface
    • RS-232 Interface
  • Application Connections
    • Local Sense Connections
    • Remote Sense Connections
    • Parallel Connections
    • Low Voltage Operation
• Turn-On Checkout
  • Introduction
  • Checkout Procedure
  • In Case of Trouble
    • Error Messages
    • Selftest Errors
• Front Panel Operation
  • Introduction
  • Front Panel Description
  • System Keys
  • Function keys
    • Immediate Action Keys
    • Scrolling Keys
    • Metering Keys
    • Input Control Keys
    • Transient Control Keys
    • Trigger Control Keys
    • List Control Keys
  • Entry Keys
  • Examples of Front Panel Programming
    • 1 - Using the Front Panel Display
    • 3 - Programming Transient Operation
    • 4 - Programming Lists
    • 5 - Querying and Clearing Output Protection and Errors
    • 6 - Making Basic Front Panel Measurements
    • 7 - Setting the GPIB Address
    • 8 - Storing and Recalling Instrument States
• Specifications
• Performance Test and Calibration Procedures
  • Introduction
  • Equipment Required
  • Performance Tests
    • IMON Zero Verification
    • CC Mode Tests
    • CV Mode Tests
    • CR Mode Tests
    • Transient Generator Mode Tests
    • Agilent N3302A Verification Test Record
  • Calibration
• Index