Agilent Technologies Power Supply 664Xa Users Manual 66xxA Series Operating Guide

2015-02-02

• Certification
• Safety Summary
• Printing History
• Table of Contents
• General Information
  • Introduction
  • Safety Considerations
  • Instrument Identification
  • Options
  • Accessories
  • Description
    • Front Panel Programming
    • Remote Programming
    • Analog Programming
  • Output Characteristic
    • General
    • Downprogramming
  • Specifications and Supplemental Characteristics
• Installation
  • Inspection
    • Damage
    • Packaging Material
    • Items Supplied
    • Cleaning
  • Location and Temperature
    • Bench Operation
    • Rack Mounting
    • Temperature Performance
  • Input Power Source
    • Installing the Series 664xA and 665xA Power Cord
    • Installing the Series 667xA Power Cord
    • Installing the Series 668xA Power Cord
    • Installing the Series 669xA Power Cord
• Turn-On Checkout
  • Introduction
  • Preliminary Checkout (All Models)
  • Power-On Checkout (All Models)
  • Using the Keypad (All Models)
    • Shifted Keys
    • Backspace Key
  • Output Checkout (All Models)
    • Checking the Voltage Function
    • Checking the Current Function
  • Checking the Save and Recall Functions (All Models)
  • Determining the GPIB Address (All Models)
  • In Case of Trouble
    • Line Fuse
    • Series 664xA and 665xA Supplies
    • Series 667xA Supplies
    • Series 668xA Supplies
    • Series 669xA Supplies
  • Error Messages (All Models)
    • Selftest Errors
    • Power˚On Error Messages
    • Checksum Errors.
    • Runtime Error Messages
• User Connections
  • Rear Panel Connections (All Models)
  • Load Wire Selection (All Models)
  • Analog Connector (All Models)
  • Digital Connector (All Models)
  • Connecting Series 664xA and 665xA Power Supplies to the Load
    • Output Isolation
    • Load Considerations
    • Local Voltage Sensing
    • Remote Voltage Sensing
    • Connecting One Supply to the Load
    • Connecting Supplies in Auto-Parallel
    • Connecting Supplies in Series
    • External Voltage Control
  • Connecting Series 667xA Power Supplies to the Load
    • Output Isolation
    • Load Considerations
    • Local Voltage Sensing
    • Remote Voltage Sensing
    • Connecting One Power Supply to a Single Load
    • Connecting One Power Supply To Multiple Loads
    • Connecting Supplies in Auto˚Parallel
    • Connecting Supplies in Series
    • External Voltage Control
  • Connecting Series 668xA and 669xA Power Supplies to the Load
    • Output Isolation
    • Load Considerations
    • Local Voltage Sensing
    • Remote Voltage Sensing
    • Connecting One Power Supply to a Single Load
    • Connecting One Power Supply to Multiple Loads
    • Connecting Supplies in Auto˚Parallel
    • Connecting Supplies in Series
    • External Voltage Control
  • Controller Connections
    • Stand˚Alone Connections
    • Linked Connections
• Front Panel Operation
  • Introduction
  • Getting Acquainted
  • Programming the Output
    • Establishing Initial Conditions
    • Programming Voltage
    • Programming Overvoltage Protection
    • Programming Current
    • Programming Overcurrent Protection
  • CV Mode vs. CC Mode
  • Unregulated Operation
  • Saving and Recalling Operating States
  • Turn˚On Conditions
  • Setting the GPIB Address
    • Types of Power Supply GPIB Addresses
    • Changing the Power Supply GPIB Address
• Calibration
  • Introduction
  • Equipment Required
  • General Procedure
    • Parameters Calibrated
    • Test Setup
  • Front Panel Calibration
    • Entering the Calibration Values
    • Saving the Calibration Constants
    • Disabling the Calibration Mode
    • Changing the Calibration Password
    • Recovering From Calibration Problems
    • Calibration Error Messages
  • Calibration Over the GPIB
    • Calibration Language Dictionary
    • CAL:CURR
    • CAL:CURR:LEV
    • CAL:CURR:MON (Series 668xA/669xA only)
    • CAL:PASS
    • CAL:SAVE
    • CAL:STAT
    • CAL:VOLT
    • CAL:VOLT:LEV
    • CAL:VOLT:PROT
    • Agilent BASIC Calibration Program
• Operation Verification
  • Introduction
  • Test Equipment Required
    • List of Equipment
    • Current Monitoring Resistor
  • Performing the Tests
    • General Measurement Techniques
    • Programming the Power Supply
    • Order of Tests
    • Turn˚on Checkout
    • Voltage Programming and Readback Accuracy
    • Current Programming and Readback Accuracy
• Line Voltage Conversion
  • Series 664xA and 665xA Power Supplies
  • Series 667xA Power Supplies
  • Series 668xA/669xA Power Supplies
• Digital Port Functions
  • Digital Connector
  • Fault/Inhibit Operation
  • Changing the Port Configuration
  • Digital I/O Operation
  • Relay Link Operation
• Current Loop Compensation (Series 668xA Only)
  • Introduction
  • Function of Loop Compensation
  • Setting the Loop Compensation Switch
• Using Agilent 668xA/669xA Series Power Supplies in Autoparallel
  • Introduction
• Output Bus Bar Options
  • Option 601 Installation
  • Option 602 Installation
• Index
• Manual Updates