Agilent Technologies Sprinkler 54621A Users Manual

2015-02-02

• Title page
  • The Oscilloscope at a Glance
  • In This Book
• Contents
• 1 General Information
  • To inspect package contents
  • To inspect options and accessories
  • Performance Characteristics
• 2 Preparing the Oscilloscope for Use
  • Setting up the Oscilloscope
    • To adjust the handle
    • To power-on the oscilloscope
    • To adjust the display intensity
    • To connect the oscilloscope probes
    • To compensate your probe
    • To use the digital probes (mixed-signal oscilloscope only)
    • To connect a printer
    • To connect an RS-232 cable
    • To verify basic oscilloscope operation
  • Getting started using the oscilloscope interface
  • Using Quick Help
    • Selecting a language for Quick Help when the oscilloscope starts up
    • Selecting a language for Quick Help after you have been operating the oscilloscope
    • Loading a language from floppy disk
  • Cleaning the oscilloscope
• 3 Testing Performance
  • List of Test Equipment
  • To construct the test connector
  • To test the 54621D/22D Oscilloscope digital channels
  • To verify digital channel threshold accuracy
  • To verify voltage measurement accuracy
  • To verify bandwidth
  • To verify horizontal Dt and 1/Dt accuracy
  • To verify trigger sensitivity
  • Agilent 54622A/22D/24A Performance Test Record
  • Agilent 54621A/21D Performance Test Record
• 4 Calibrating and Adjusting
  • To adjust the power supply
  • To perform User Cal
  • To adjust the oscilloscope display
• 5 Troubleshooting
  • Solving General Problems with the Oscilloscopes
    • If there is no trace display
    • If the trace display is unusual or unexpected
    • If you cannot see a channel
  • Troubleshooting the Oscilloscope
    • To construct your own dummy load
    • To check out the oscilloscope
    • To check the Low Voltage Power Supply
    • To run the internal self-tests
• 6 Replacing Assemblies
  • To remove the cabinet
  • To remove the fan
  • To remove the floppy drive
  • To remove the front panel
  • To remove the display
  • To remove the system board
  • To remove the power supply
  • To remove the keyboard assembly
  • To remove the handle
• 7 Replaceable Parts
  • To order a replacement part
• Declaration of Conformity
• Notices