Agilent Technologies Psg Vector Signal Generator E8267D Users Manual 5989 1326EN_08_04_08
e8267d1 8880d61f-f916-4957-86b6-9075df16a5bc Agilent Technologies Stereo System E8267D User Guide |
2015-02-02
: Agilent-Technologies Agilent-Technologies-Psg-Vector-Signal-Generator-E8267D-Users-Manual-413436 agilent-technologies-psg-vector-signal-generator-e8267d-users-manual-413436 agilent-technologies pdf
Open the PDF directly: View PDF 
.
Page Count: 8
| Download | |
| Open PDF In Browser | View PDF |
Agilent E8267D PSG Vector Signal Generator Configuration Guide This guide is intended to assist you with the ordering process of the PSG vector signal generators. Standard product includes installation guide, electronic documentation set (CD-ROM), adapters, and country specific power cord. High output power (Option 1EA) and step attenuator (Option 1E1) are standard features in the E8267D vector signal generator. Agilent PSG Vector Signal Generator Options Step 1. Choose a frequency range All frequency range options support underrange to 100 kHz. However, performance specifications are not provided between 100 kHz and 250 kHz. Ordering number Description E8267D-520 Frequency range from 250 kHz to 20 GHz Purpose Requires Selects the maximum frequency of the signal generator. Frequency range from 250 kHz to 31.8 GHz Selects the maximum frequency of the signal generator. Frequency range from 250 kHz to 44 GHz Selects the maximum frequency of the signal generator. E8267D-532 E8267D-544 Step 2. Choose spectral purity Ordering number Description Purpose Standard E8267D-UNX Standard spectral purity Ultra low phase noise E8267D-1EH Improved harmonics below 2 GHz Provides low phase noise. Improves phase noise performance at carrier frequency offsets ranging from 1 Hz to 10 kHz. Improves harmonic performance for carrier frequencies below 2 GHz. Requires Step 3. Choose modulation Ordering number Description Purpose Standard CW signal generation, vector (IQ) modulation capability Generates continuous wave (CW) signals and can modulate IQ waveforms provided by the optional internal baseband generator (Option 602) or an external baseband source Generates analog modulated signals. Generates pulse modulated signals (150 ns minimum pulse width). Generates pulse modulated signals (20 ns minimum pulse width). E8267D-UNT E8267D-UNU E8267D-UNW 1 1 AM, FM, phase modulation, and LF output Pulse modulation Narrow pulse modulation Requires Step 4. Choose ramp sweep Ordering number Description Purpose E8267D-007 Analog ramp sweep Generates a fully synthesized ramp (analog) sweep of frequency and amplitude. Requires Step 5. Choose internal baseband generator Ordering number Description Purpose E8267D-602 Internal baseband generator, 64 Msa memory Generates arbitrary and real-time I/Q waveforms (80 MHz of RF modulation bandwidth). E8267D-009 Removable flash memory 1. 2 Requires Option E8267D-UNU and E8267D-UNW are mutually exclusive; choose one or the other or neither. However, option E8267D-UNU can be upgraded to E8267D-UNW. Step 6. Choose wideband external I/Q Ordering number Description Purpose E8267D-016 Provides up to 2 GHz RF modulation bandwidth for carrier frequency above 3.2 GHz and up to 260 MHz below 3.2 GHz. Standard external I/Q inputs provide 160 MHz RF modulation bandwidth. Wideband external differential I/Q inputs Requires Step 7. Choose signal creation software for your baseband generator Ordering number Description Purpose Requires E8267D-403 E8267D-SP1 Calibrated Noise (AWGN) generation Signal Studio for jitter injection E8267D-602 E8267D-602 N7600B Signal Studio for 3GPP W-CDMA FDD N7601B Signal Studio for 3GPP2 CDMA N7602B Signal Studio for GSM/EDGE N7606B Signal Studio for Bluetooth N7613A N7613A-102 N7617B Signal Studio for 802.16-2004 (WiMAX) N7619A N7619A-117 Signal Studio for multiband OFDM UWB Provides settable Eb/No and C/N Create repeatable additive calibrated jitter with variable rate and deviation for tolerance measurements Create W-CDMA FDD single/multi-carrier uplink/downlink test signals at baseband and RF, for basestations, mobile transceivers, and their components Create cdma2000 and IS-95-A single/multicarrier, forward/reverse link test signals at baseband and RF, for basestations, mobile transceivers, and their components Create GSM and EDGE single or multicarrier test signals at baseband or RF Configure fully-coded Bluetooth packets and and Bluetooth modulated data streams for both basic and enhanced date rate (v2.1+EDR) Create IEEE 802.16-2004 (WiMAX) test signals at baseband and RF Create arbitrary waveforms that comply with the WLAN standards 802.11a/b/g/j/p/n Create UWB (Ultra Wideband) signals that comply with the proposed Multi-band OFDM Alliance (MBOA) physical layer specification Generates customized wide bandwidth pulse patterns for simulation. Requires a PSA or ESA spectrum analyzer for waveform corrections Signal Studio for 802.11 WLAN N7620A Signal Studio for pulse building N7620A-117 or 118 (wideband waveforms) N7620A N7620A-102 Signal Studio for pulse building Generates customized pulse patterns for simulation. Requires a PSA or ESA spectrum analyzer for waveform corrections N7621A N7621A-117 -203 -204 Signal Studio for multitone distortion (wideband waveforms) (multi tone) (noise power ratio) N7621B Signal Studio for multitone distortion N7623B Signal Studio for digital video Generates wide bandwidth mutiple tone signals and applies pre-distortion techniques to remove the nonlinear distortion of the signal generator. Generates a simulated broadband noise signal to facilitate NPR measurements. Pre-distortion technigues are used to improve flatness and increase notch depth. Requires a PSA spectrum analyzer. Generates mutiple tone signals and applies pre-distortion techniques to remove the nonlinear distortion of the signal generator. Generates a simulated broadband noise signal to facilitate NPR measurements. Pre-distortion technigues are used to improve flatness and increase notch depth. Requires a PSA spectrum analyzer. Create DVB-T/H/C/S/S2, ISDB-T, DTMB, CMMB, J.83 Annex A/B/C and ATSC software E8267D-602 E8267D-602 E8267D-602 E8267D-602 E8267D-602 E8267D-602 N6030A wideband arbitrary waveform generator E8267D-016 E8267D-UNX, E8267D-UNW, N6030A or N8241A wideband arbitrary waveform generators E8267D-602, E8267D-009 E8267E-UNX (recommended) E8267D-016 E8267D-009 (recommended) N6030A or N8241A wideband arbitrary waveform generator E8267D-602 E8267D-009 E8267D-UNX (recommended) E8267D-602 3 Step 8. Choose special options Special options add unique capabilities to the signal generator for specific applications. Ordering number Description Purpose Requires Add input and output of phase reference LO Provides multi-source phase coherency E8267D-016 E8267D-HBQ (China) Z5623AKxx Distribution Amplifier (recommended) E8267D-H1G Add 1 GHz external phase reference E8267D-SP2 Dynamic sequencing E8267D-HSQ 2 Add second set of IQ inputs E8267D-H1S Add 1 GHz external frequency reference input Provides multi-source phase coherency for carrier frequencies 100 kHz to 250 MHz Provides ability to change sequences on command in the arbitary waveform generator Provides ability to switch between two different external IQ inputs Enables use of an external frequency reference to improve spectral purity E8267D-H18 Wideband modulation less than 3.2 GHz E8267D-HCC E8267D-602 E8267D-602 Step 9. Choose instrument connector configuration and accessories Note: Standard 20 GHz models include a 3.5 mm (m) RF output connector on the front panel. Standard 31.8 GHz and 44 GHz models include a 2.4 mm (m) RF output connector on the front panel. Ordering number Description Standard with E8267D-520 Standard with E8267D-532 and E8267D-544 E8267D-1ED 1 E8267D-1EM E8267D-003 E8267D-004 E8267D-1CM 5063-9215 E8267D-1CN 5063-9228 E8267D-1CP 5063-9222 8120-8806 9211-2656 9211-7481 N5101A N5101A-022 N5102A N5110B 1. 2. 4 3.5 mm (f) to 3.5 mm (f) Purpose Requires Adapter set is included with the purchase of the 20 GHz models to connect to 3.5 mm (m). 2.4 mm (f) to 2.4 mm (f) Adapter set is included with the purchase of the 31.8 GHz and 44 GHz models to connect 2.4 mm (f) to 2.9 mm (f) to 2.4 mm (m) and 2.9 mm (m). Type-N (f) RF output connector Type-N (m) to 3.5 mm (f) adapter set is E8267D-520 included with the purchase of the type-N (m) connector. Moves all front panel connectors to Simplifies cable management in rack mount the rear panel environments. PSG digital output connectivity with N5102A E8267D-602, N5102A PSG digital input connectivity with N5102A E8267D-602, N5102A Rackmount flange kit Provides a flange kit to mount the signal generator into a standard EIA 19" rack. Front handle kit Provides front handles for carrying the instrument (not for rack mount). Rack mount flange and front handle kit Provides front handles and a flange kit to mount the signal generator into a standard EIA 19” rack. Master/slave interface cable Provides an interface cable to use two PSG's in master/slave mode. Transit case Provides a hard transit case to protect the instrument during transit. Transit case with wheels Provides a hard transit case with wheels to protect the instrument during transit. Baseband Studio PCI card Enables N5110B Baseband Studio E8267D-602, N5110B 512 MSamples of waveform memory Waveform memory for the Baseband Studio N5101A PCI card Baseband Studio digital signal interface module Provides digital I/Q and digital IF E8267D-602, inputs/outputs to/from the E4438C ESG E8267D-003, and E8267D PSG vector signal generators. E8267D-004 Baseband Studio for waveform capture Allows playback of I/Q waveform data N5101A, and playback directly from a PC hard drive or the optional E8267D-602 512 MSa waveform memory on the N5101A to the E4438C ESG or the E8267D PSG vector signal generator. E8267D-1ED is not compatible with the 31.8 GHz or 44 GHz models. E8267D-HSQ is not compatible with E8267D-1EH or E8267D-HCC. Step 10. Choose documentation Standard products ship with an installation guide and an electronic documentation set (CD-ROM). The CD-ROM includes: user’s guide, installation guide, programming guide, service guide, SCPI command reference, error messages, key reference, data sheets, and additional product literature. Ordering number Description E8267D-CD1 E8267D-ABA CD-ROM containing the English documentation set Printed copy of the English documentation set (user’s guide, programming guide, SCPI reference, key reference, and data sheets) Printed copy of the Chinese User's Guide Printed copy of the Japanese User's Guide Printed copy of the assembly-level service guide Commercial calibration certificate and test data E8267D-AB2 E8267D-ABJ E8267D-0BW E8267D-UK6 Step 11. Choose a warranty plan Ordering number Description Standard 3 years 5 years 1-year return-to-Agilent warranty and service Extended return-to-Agilent warranty and service Extended return-to-Agilent warranty and service Step 12. Choose a calibration plan There is no calibration plan standard with the E8267D. For a calibration plan, specify 3 or 5 years for one of the appropriate plans below when ordering. For more information, please visit: www.agilent.com/find/services_upfront_options. Plan Agilent Calibration Upfront Plan Agilent Calibration Plus Upfront Plan Z540 Calibration Upfront Plan 5 Upgradeable Options Customer-installable and service center-installable upgrade kits are available for the E8267D signal generators. If an option is not mentioned that you would like to have upgraded on your PSG, please contact your local Agilent representative about our customized upgradeable options. Choose customer- installable upgrade kits 1, 3 Ordering number Upgrade description E8267DK-403 E8267DK-SP1 E8267DK-602 2 E8267DK-005 5 E8267DK-009 4 E8267DK-016 7 E8267DK-1ED 2 E8267DK-1EH 2 E8267DK-UNX 2 E8267DK-UNW 2 E8267DK-007 E8267DK-UNT E8267DK-UNU E8267DK-015 6 1. 2. 3. 4. 5. 6. 7. 6 Complete upgrade kit with installation guide Complete upgrade kit with installation guide Complete upgrade kit with installation guide Complete upgrade kit with installation guide Complete upgrade kit with installation guide Complete upgrade kit with installation guide Complete upgrade kit with installation guide Complete upgrade kit with installation guide Complete upgrade kit with installation guide Complete upgrade kit with installation guide License key License key License key License key Information required with order Customer’s email address Customer’s email address Customer’s email address Latest firmware is recommended for upgrades. Firmware can be found at www.agilent.com/find/upgradeassistant. Calibration required. Calibration and installation costs are not included in the price of upgrade installation performed at a service center. Consult your Agilent Sales representative for details. E8267DK-009 is only available for instrument prefix greater than or equal to 4829xxxx. E8267DK-005 is only available for instrument prefix less than 4829xxxx. E8267DK-015 is only available for instrument prefix less than 4722xxxx. E8267DK-016 is only available for instrument prefix greater than or equal to 4722xxxx. Web Resources For additional product information, visit: www.agilent.com/find/psg For information about renting, leasing or financing Agilent’s latest technology, visit: www.agilent.com/find/buyalternatives For accessory information, visit: www.agilent.com/find/accessories Related Agilent Literature Agilent PSG Signal Generators Brochure, Literature number 5989-1324EN E8257D PSG Analog Signal Generator Data Sheet, Literature number 5989-0698EN E8267D PSG Vector Signal Generator Data Sheet, Literature number 5989-0697EN E8257D PSG Analog Signal Generator Configuration Guide, Literature number 5989-1325EN PSG Two-Tone and Multitone Personalities Application Note 1410, Literature number 5988-7689EN Signal Studio for Pulse Building Technical Overview, Literature number 5988-8134EN Signal Studio for Noise Power Ratio Technical Overview, Literature number 5988-9161EN Signal Studio for Enhanced Multitone Technical Overview, Literature number 5988-5639EN N5102A Baseband Studio Digital Signal Interface Module Technical Overview, Literature number 5988-9495EN N5110B Baseband Studio for Waveform Capture and Playback Technical Overview, Literature number 5989-2095EN Digital Modulation in Communications Systems — An Introduction Application Note 1298, Literature number 5965-7160E Free Agilent Software Agilent software can be found by selecting the Software, Firmware & Drivers embedded link located on each of the PSG E8267D and PSG E8257D web pages. 7 Agilent Email Updates www.agilent.com/find/emailupdates Get the latest information on the products and applications you select. Agilent Direct www.agilent.com/find/agilentdirect Quickly choose and use your test equipment solutions with confidence. Agilent Open www.agilent.com/find/open Agilent Open simplifies the process of connecting and programming test systems to help engineers design, validate and manufacture electronic products. Agilent offers open connectivity for a broad range of system-ready instruments, open industry software, PC-standard I/O and global support, which are combined to more easily integrate test system development. Remove all doubt Our repair and calibration services will get your equipment back to you, performing like new, when promised. You will get full value out of your Agilent equipment throughout its lifetime. Your equipment will be serviced by Agilent-trained technicians using the latest factory calibration procedures, automated repair diagnostics and genuine parts. You will always have the utmost confidence in your measurements. Agilent offers a wide range of additional expert test and measurement services for your equipment, including initial start-up assistance onsite education and training, as well as design, system integration, and project management. For more information on repair and calibration services, go to: www.agilent.com/find/removealldoubt www.agilent.com For more information on Agilent Technologies’ products, applications or services, please contact your local Agilent office. The complete list is available at: www.agilent.com/find/contactus Americas Canada Latin America United States (877) 894-4414 305 269 7500 (800) 829-4444 Asia Pacific Australia China Hong Kong India Japan Korea Malaysia Singapore Taiwan Thailand 1 800 629 485 800 810 0189 800 938 693 1 800 112 929 0120 (421) 345 080 769 0800 1 800 888 848 1 800 375 8100 0800 047 866 1 800 226 008 Europe & Middle East Austria 01 36027 71571 Belgium 32 (0) 2 404 93 40 Denmark 45 70 13 15 15 Finland 358 (0) 10 855 2100 France 0825 010 700* *0.125 €/minute Germany 07031 464 6333** **0.14 €/minute Ireland 1890 924 204 Israel 972-3-9288-504/544 Italy 39 02 92 60 8484 Netherlands 31 (0) 20 547 2111 Spain 34 (91) 631 3300 Sweden 0200-88 22 55 Switzerland 0800 80 53 53 United Kingdom 44 (0) 118 9276201 Other European Countries: www.agilent.com/find/contactus Revised: July 17, 2008 Product specifications and descriptions in this document subject to change without notice. © Agilent Technologies, Inc. 2004-2008 Printed in USA, August 4, 2008 5989-1326EN
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0 (Windows) Creator Tool : Adobe InDesign CS2 (4.0.5) Modify Date : 2008:08:05 11:16:01-07:00 Create Date : 2008:08:05 11:16:01-07:00 Format : application/pdf Title : 5989-1326EN_08_04_08.indd Creator : matt Document ID : uuid:0d84dfaa-91a3-419d-a7ca-07fd0752da41 Instance ID : uuid:f5b2b54c-88d1-4649-886b-a4f4677ee0de Page Count : 8 Author : mattEXIF Metadata provided by EXIF.tools