Agrident DHP RFID reader module User Manual dap100

Download:
Mirror Download [FCC.gov]
Document ID	271008
Application ID	NT2/kvYS5+fR6ycQ/Ln43w==
Document Description	Manual Antenna Description
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	4.02kB (50305 bits)
Date Submitted	2002-09-18 00:00:00
Date Available	2002-09-18 00:00:00
Creation Date	2002-08-02 14:20:19
Producing Software	Acrobat Distiller 4.05 for Windows
Document Lastmod	2002-08-02 14:21:02
Document Title	Microsoft Word - dap100
Document Creator	Pscript.dll Version 5.0
Document Author:	ChristaJ

User manual
FOR MicroID TELESCOPE EXTENSION ANTENNA DAP100
1) Introduction
The DAP-telescope extension antenna is a high quality product from HOTRACO
MicroID. When used in conjunction with a DHP111/112-Reader Module for the
PSION®-workabout you are provided with powerful mobile RF/ID system.
The telescope antenna can be extended from 0.30 up to 1.20 metres, that makes
controlling inside the stable a lot easier. Not extended the combination of antenna
and Reader module is still very handy.
2) Mounting
The DAP-telescope extension antenna is to be mounted to the backside of the
PSION®-workabout. Then the antenna has to be connected to the Reader module
with the white connection cable. Before that, you have to take the blind plug off the
Reader module. Please store this blind plug in a safe place. If you want to use
the Reader modules internal antenna you have to put the blind plug back on.
Mountingplate for PSION®-workabout MX
Since October ’98 Psion produces the PSION®-workabout MX. The PSION®workabout MX was developed from the old PSION®-workabout and is, according to
Psion, more powerful.
Unfortunately Psion didn’t only change the interior of the PSION®-workabout but also
the exterior. According to that we’ll have to change the fixing of our telescopeextension antenna DAP100 to fit on the new MX.
Since some customers still use the old PSION®-workabout we deliver our telescope
extension antenna DAP100 with two different mounting plates. As a default the plate
for the old PSION®-workabout is mounted. So if you own a new PSION®-workabout
MX, you’ll have to change the plate (all screws you need are provided).
For that matter you first take the old plate off the antenna bottom. Then you take the
distantpiece and mount it between the new plate and the antenna bottom. While
mounting, please watch for the connection cable to the Reader module. It has
to be in the small rim spared out in the antenna bottom. Otherwise you might
damage it.
Finally mount the antenna to the back of your PSION®-workabout MX.
3) Handling
The telescope antenna DAP100 can be extended in two phases. Therefor you have
to loosen the black locks and pull the extension out. To fasten it, just tighten the locks
again.
While working with the antenna, please handle it with care, because the inside of the
antenna top is breakable.
4) Technical data
Antenna extension:
metres
Mechanical extension of reading distance for about 1.2
Weight:
appr. 400g
Stand 1.4.1999

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Annotate, Fill forms, Extract, Assemble, Print high-res
Create Date                     : 2002:08:02 14:20:19
Producer                        : Acrobat Distiller 4.05 for Windows
Author                          : ChristaJ
Creator                         : Pscript.dll Version 5.0
Title                           : Microsoft Word - dap100
Modify Date                     : 2002:08:02 14:21:02+02:00
Page Count                      : 2
Page Mode                       : UseNone

EXIF Metadata provided by EXIF.tools