Agtatec IPQ420US K-Band Transceiver User Manual 420 US

Download:
Mirror Download [FCC.gov]
Document ID	890828
Application ID	ENIf8MeEZTYkCAGuF74xyg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	24.99kB (312413 bits)
Date Submitted	2008-01-18 00:00:00
Date Available	2008-01-18 00:00:00
Creation Date	2008-07-01 07:57:00
Producing Software	GNU Ghostscript 7.06
Document Lastmod	2008-07-01 07:57:00
Document Title	420_US_User Manual
Document Creator	PDFCreator Version 0.8.0
Document Author:	Baeuerlein_Stefan

___________________________________________________________________________________________________
USER MANUAL
Product Family:
Range of use:
K-Band Transceiver
advanced door applications
Module Number:
IPQ-420_US
_____________________________________________________________________________________________________
Description:
Basic Features IPQ-420_US:
•
•
•
•
•
radar-based motion detector working in the 24GHz ISM Band
stereo (dual channel) operation for direction of motion
identification
integrated IF-amplifier
split transmit and receive path for maximum gain
two different receive antenna patterns
Electrical Characteristics:
Parameter
transmit frequency
output power (EIRP)
temperature drift
I/Q balance
IF-amplifier
supply voltage
supply current
mod input
operating temperature
outline dimensions
Symbol
fUS
fUK
Pout
∆f
amplitude
phase
gain
bandwidth
VCC
ICC
min.
24.075
24.150
typ.
24.125
max.
24.175
24.250
20
-1,0
60
4Hz
90
34
120
1.5kHz
55
TOP
-20
70
according to drawing 102-290.109.927 C
units
GHz
GHz
dBm
MHz/°C
dB
°
dB
45
mA
°C
mm
comment
digital input (0V / 5V)
Interface:
The sensor provides a 0.5mm pitch 8 pin ZIF-Connector with skinning on both sides
Pin #
1 von 3
Description
nc
Mod
Vcc
GND
S4
S3
S2
S1
Typ
--input
input
input
output
output
output
output
Comment
not connected
modulation signal (digital Input 0V / 5V)
supply voltage (+8V)
analog ground
Rx1 Signal Q(uadrature) / narrow antenna pattern
Rx1 Signal I(nphase) / narrow antenna pattern
Rx2 Signal I(nphase) / broad antenna pattern
Rx2 Signal Q(uadrature) / broad antenna pattern
USER MANUAL IPQ-420_US
071212
Version 1.0
Antenna Characteristics:
Rx1
Tx
Rx2
elevation
azimuth
Parameter
antenna pattern Tx (3dB)
antenna pattern Tx (10dB)
squinting angle
side lobe suppression Tx
antenna pattern Rx1 (3dB)
antenna pattern Rx1 (10dB)
squinting angle
side lobe suppression Rx1
antenna pattern Rx2 (3dB)
antenna pattern Rx2 (10dB)
squinting angle
side lobe suppression Rx
Symbol
horizontal
vertical
horizontal
vertical
vertical
horizontal
vertical
horizontal
vertical
horizontal
vertical
vertical
horizontal
vertical
horizontal
vertical
horizontal
vertical
vertical
horizontal
vertical
min.
typ.
75
38
135
70
10
44
46
83
85
11
75
38
135
70
10
max.
15
12
15
12
15
12
units
°
°
°
°
°
dB
dB
°
°
°
°
°
dB
dB
°
°
°
°
°
dB
dB
comment
azimuth
elevation
azimuth
elevation
elevation
azimuth
elevation
azimuth
elevation
azimuth
elevation
elevation
azimuth
elevation
azimuth
elevation
azimuth
elevation
elevation
azimuth
elevation
Mechanical Outlines:
all dimensions in Millimeter / for details compare with drawing 102-290.109.927 C
2 von 3
USER MANUAL IPQ-420_US
071212
Version 1.0
I/Q-Definition:
If the movement is toward to the radar, signal Q is advances
FCC approval
•
This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
•
Warning: Changes or modifications made to this equipment not expressly approved by InnoSenT GmbH may
void the FCC authorization to operate this equipment.
•
Manufacturers of mobile or fixed devices incorporating IPQ-420_US modules are authorized to use the FCC
Grants and IC Certificates of the IPQ-420_US modules for their own final products according to the
conditions referenced in these documents. In this case, the FCC label of the module shall be visible from the
outside, or the host device shall bear a second label stating "Contains FCC ID: QKR-IPQ420US".
3 von 3
USER MANUAL IPQ-420_US
071212
Version 1.0

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Page Count                      : 3
Producer                        : GNU Ghostscript 7.06
Title                           : 420_US_User Manual
Creator                         : PDFCreator Version 0.8.0
Create Date                     : 2008:07:01 07:57:00
Author                          : Baeuerlein_Stefan
Modify Date                     : 2008:07:01 07:57:00
Subject                         : 

EXIF Metadata provided by EXIF.tools