Agtatec RAD270 Doppler Effect Motion Detector User Manual Montage und Einstellanleitung RAD 270

Download:
Mirror Download [FCC.gov]
Document ID	295389
Application ID	JKZKsra9ltZxaKJfk8mrWg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	10.35kB (129371 bits)
Date Submitted	2003-01-13 00:00:00
Date Available	2003-01-13 00:00:00
Creation Date	2002-12-18 18:16:17
Producing Software	FinePrint pdfFactory v1.25 (Windows 2000 German)
Document Lastmod	0000-00-00 00:00:00
Document Title	Montage- und Einstellanleitung RAD 270
Document Creator	http://www.fineprint.com
Document Author:	BU

Montage- und Einstellanleitung
RADAR
Mounting and adjustment instructions
270
Instructions pour montage et ré glages
your global partner for entrance solutions
Radar-Bewegungsmelder fü r die Verwendung an automatischen Tü r- und Torsystemen
Radar motion detector for applications in automatic entrance and door systems
Détecteur de mouvement radar pour applications dans le domaine des portes automatiques
D
Technische Daten
Speisespannung:
Anschlussleistung:
Max. Anschlussabsicherung bei
Fremdspeisung:
Temp. Bereich:
Betriebsfrequenz ( -Band):
Betriebsfrequenz (X-Band):
Ausgangsleistung:
Anschlusskabellä nge:
12...24 VAC/DC
ca. 1.8 W
2.5 A
–20...+50 ° C
13.7 GHz
10.525 GHz
5 mW
2.5 m
Technical data
Supply voltage:
Connected load:
Max. fuse protection if
separately supplied:
Temp. range:
Frequency ( -Band):
Frequency (X-Band):
Power output:
Wire length:
12...24 VAC/DC
1.8 W approx.
2.5 A
– 20...+ 50 ° C
13.7 GHz
10.525 GHz
5 mW
2.5 m
Caracté ristiques techniques
Tension d’alimentation:
Consommation:
Protection de raccordement max.
lors d'une alimentation externe:
Température:
Fréquence (bande ):
Fréquence (bande X):
Puissance de sortie:
Longueur du câble:
12...24 VAC/DC
1.8 W environ
2.5 A
–20...+50 ° C
13.7 GHz
10.525 GHz
5 mW
2.5 m
Important hints, when using the radar RAD270 in the US
15.19:
This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
15.21:
Warning: Changes or modifications made to this equipment not expressly approved by agtatec ag may void the FCC authorization to operate this
equipment.
15.105: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
D
10
11
Teilekennzeichnung
Boden fü r Aufputzgehä use
Befestigungsschrauben
Aufputzgehä use
Absorberträ ger
Print mit Mikrowellenmodul
Gehä useoberteil
Einbaurahmen
Anschlusskabel mit Stecker
Regenhaube
Halter fü r Deckenmontage
Zwischenplatte mit Distanzstü ck fü r Montage auf
gewö lbten oder rauhen Oberflä chen
10
11
Description
Bottom for surface-mounted enclosure
Fixing screws
Surface-mounted enclosure
Absorber support
Printed board for microwave module
Upper part enclosure
Installation frame
Connection wire
Weather shield
Bracket for ceiling installation
Mounting plate for fixing to circular or rough
surfaces
10
11
Description
Support pour boîtier apparent
Vis de fixation
Boîtier apparent
Support d’absorbeur
Circuit imprimé pour module micro-ondes
Gehä useoberteil
Cadre à encastrer
Câble de raccordement
Capot protection contre les intempéries
Console pour fixation au plafond
Plaque de montage pour fixation aux surfaces
courbes ou rugueuses
10
11

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Title                           : Montage- und Einstellanleitung RAD 270
Author                          : BU
Creator                         : http://www.fineprint.com
Producer                        : FinePrint pdfFactory v1.25 (Windows 2000 German)
Create Date                     : 2002:12:18 18:16:17
Page Count                      : 3

EXIF Metadata provided by EXIF.tools