Aionex RFIDRW01 RFID READER/ WRITER User Manual USERS MANUAL
Aionex Inc. RFID READER/ WRITER USERS MANUAL
Aionex >
USERS MANUAL
5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598
FCC Part 15.225
Transmitter Certification
13.56MHz RFID Reader/Writer
Test Report
FCC ID: UEJRFIDRW01
FCC Rule Part: 15.225
ACS Report Number: 06-0215-15C
Manufacturer: AIONEX
Model: RFID Reader/Writer
Installation and Operators Guide
Model: UEJRFIDRW01
Version: 1.0
13.56MHz RFID Reader/Writer
Operator’s Guide
Operator’s Guide UEJRFIDRW01 Rev. A
Page 3 of 10AIONEX Inc.
8 2006 Copyright Aionex, Inc.
AIONEX Inc.
104 Space Park North
Goodlettsville, TN 37072
Phone: 615-338-5050
Fax: 615-851-5644
www.aionex.com
The contents of this document may not be copied, transmitted,
published, or disclosed to others without prior written
authorization.
Operator’s Guide UEJRFIDRW01 Rev. A
Page 4 of 10 AIONEX Inc.
Table of Contents
Table of Contents ..........................................................................................4
FCC Compliance Information .......................................................................5
Product Overview ..........................................................................................6
General Description ............................................................................6
Technical Data ....................................................................................6
Assembly and Wiring .....................................................................................7
PS2 Power Connection ........................................................................7
Asynchronous Interface RS232 ...........................................................7
Audio and Visual Elements ............................................................................8
Bi-color LED .........................................................................................8
Signal Buzzer .......................................................................................8
Accessories ...................................................................................................9
Operator’s Guide UEJRFIDRW01 Rev. A
Page 5 of 10AIONEX Inc.
FCC Class A:
“Note: This equipment has been tested and found to comply
with limits for a Class A digital device, pursuant to part 15 of the FCC
rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in
a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own
expense.”
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY
RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED
MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS
COULD VOID THE USER’S AUTHORITY TO OPERATE THE
EQUIPMENT.
Operator’s Guide UEJRFIDRW01 Rev. A
Page 6 of 10 AIONEX Inc.
The following sections provide an overview of the AIONEX RFID Reader/Writer.
Product Overview
The AIONEX RFID Reader/Writer is a multi-protocol desktop, wall mount, or
handheld radio frequency identification (RFID) data collection device. The
Reader is designed to communicate with most industry standard 13.56 MHz
RFID tags and smart labels. The Reader has an internal antenna with a typical
read/write range of several inches.
The Reader has an attached interface cable with a PS2 jumper cable for
power. An asynchronous RS232 interface provides for host communication to a
PC or terminal.
The Reader is ideal for use in a variety of medical, industrial, commercial, and
field service environments.
General description
Frequency Host Communication Interface/Data Rate
13.56 MHz +/- 7 kHz UART (RS232): 9600 bps/8/n/1
Physical Compliance
Length: 143 mm FCC Part 15.225
Width: 63.5 mm Transponder Communication Rate
Height: 31.75 mm 26 kbps ISO 15693
Current Consumption 106 kbps ISO 14443A
Scan Mode: 100 mA Effective Rage
Standby: 17 mA 70 mm ISO 15693
Antenna (Individual results may vary with environment)
Internal PCB Tag Compatibility
Supply Voltage ISO 15693, ISO 14443A, Tag-It HF, ICode 1,
+5VDC ICode SLI, my-d, LR1512, Pico Tag, GemWave,
Mifare
Technical data
Operator’s Guide UEJRFIDRW01 Rev. A
Page 7 of 10AIONEX Inc.
The following sections describe the interface cable and PS2 power connection.
Assembly and Wiring
Plug the Reader’s PS2 connector into an available PS2 port. If no PS2 port is
available then an alternative power source must be provided.
PS2/M
Pin 4 +5VDC
Pin 3 Ground
PS2 power connection
Asynchronous interface RS232
Plug the Reader’s DB9/F connector into an available RS232 serial port on a PC
or other terminal. A standard three-wire interface (Rx, Tx, and Gnd) is used.
Secondary power connections are provided for added flexibility.
RS232 port configuration
9600, N,8,1
DB9/F
Pin 2 Tx
Pin 3 Rx
Pin 5 Ground
Pin 6 +5VDC
Pin 9 Ground
Operator’s Guide UEJRFIDRW01 Rev. A
Page 8 of 10 AIONEX Inc.
Audio and Visual Elements
The Reader’s Bi-color LED is configured and controlled through software.
Typical Bi-color LED usage
LED green Turns on when a label is detected and read.
LED red Turns on when a read error has occurred.
Bi-color LED
The Reader’s signal buzzer is configured and controlled through software.
Typical signal buzzer usage
Buzzer ON Active when a label is detected and read.
Signal buzzer
Operator’s Guide UEJRFIDRW01 Rev. A
Page 9 of 10AIONEX Inc.
The following accessories are available for the AIONEX RFID Reader/Writer.
Smart L - Wall Holder
AIONEX RFID RS232/485 Wall Plate Adapter
Accessories