Aiphone Nhx Nh 1Sa Acb Blu Users Manual Visio Code Blue, NHR 7A CB Instr

NH-1SA-ACB-BLU to the manual b6d82d99-08dd-403b-ba93-0eb2c904462d

: Aiphone Aiphone-Nhx-Nh-1Sa-Acb-Blu-Users-Manual-355467 aiphone-nhx-nh-1sa-acb-blu-users-manual-355467 aiphone pdf

Open the PDF directly: View PDF .
Page Count: 2

Download
Open PDF In Browser	View PDF

Nurse Call System

0605

NH-1SA-AC-BLU, NH-1SA-ACB-BLU Code Blue Station,
NHR-7A-CB1, NHR-7A-CB2 Code Blue Call Switch
- INSTRUCTIONS The models listed above have been modified to allow the Blue Call button (NHR-7A-CB) to activate the highest
priority call on the NHX Nurse Call System. When the Blue switch is pushed down to the lower position, the master
station will indicate the call with a fast intermittent call tone and flashing LED. The call can be cancelled only by
raising the switch to the upper position. All other call levels remain the same.

WIRING DIAGRAM:

NH-1SA-AC-BLU
Code Blue Sub

NHX-80X

Trunk line
output #1

11
12
13
14
15
16

CN1:
Brn
Red
Org
Yel
Grn
Blu

Brn
Red
Org
Yel
Grn
Blu

NHR-4A

Trunk line
output #2

PS-2420UL

21
22
23
24
25
26

+
-

A+
A-

+
-

B+
B-

Brn
Red
Org
Yel
Grn
Blu
Blu
NHR-7A

CN2:
Brn
Red
Org
Yel
Grn
Blu
Pur
Gry

NHR-7A-CB1
Code Blue

Blk
Wht
Gry/Red

Grn
Blu1

Yel
Blu(2)
Brn*
Brn*

PS-2420UL

2nd dry
contact closure

Models:
• NHR-7A-CB1: standard unit (SPST)
• *NHR-7A-CB2: Includes second dry
contact closure (DPDT)

NOTES:
1. The NH-1SA-ACB-BLU wires the same as the station shown above.
2. NHR-7A-CB1 is a Code Blue station includes one set of contacts (SPST).
3. The NHR-7A-CB2 model includes two dry contact closures (DPDT, BRN wires).
4. Black wire from NH-1SA-AC-BLU is only used in systems with All Call.
5. See operational instructions for the system following on page two of this instruction sheet.
6. Only wiring concerning the Code Blue stations is shown here. Please see standard Installation Manual
for complete information.

NH-1SA-ACB-BLU Instr
Page 1

OPERATIONS:
The NHX system with CODE BLUE has three priority levels:
Priority 1: Code Blue
Priority 2: Bath call and cord-out
Priority 3: Routine call
1. Code Blue call signal is a fast beep (1 per 0.5 seconds) and flashing LED (1 per 0.4 seconds).
This signal is activated when the blue call switch on the NHR-7A-CB1 is moved to the lower
position, and will continue until it's reset to the upper position.
2. The Bath/Cord out signal is a single beep (1 per 2 seconds) and a double-blinking LED (2 blinks
every 1.8 seconds). This signal is activated when the bath pull cord (NHR-7A) is moved to the
lower position, or when the handheld call button (NHR-8A) is pulled out of the station. The call
signal will remain until the master answers the call, at which time the tone will be reset. The
blinking LED will remain until the bath station is reset to the upper position or the handheld call
button is plugged back into the station.
3. The Routine call signal is a single beep (1 per 6 seconds) and a blinking LED (1 per 2 seconds).
This signal is activated when the button is pressed on the handheld call cord, and is reset when
the master station answers the call or when the CANCEL button on the patient station is
pressed.
4. To place a CODE BLUE CALL, activate the Code Blue Station located near the patient station by
pulling the attached cord or sliding the blue call switch down.
5. To reset the CODE BLUE CALL, move the blue call switch to the upper position.

Aiphone Communication Systems
1700 130th Ave. N.E.
Bellevue, WA 98005
(425) 455-0510
FAX: (425) 455-0071

TOLL FREE TECHNICAL SUPPORT:
(800) 692-0200
Extensions 8107, 8118, 8111
TOLL FREE FAX LINE:
(800) 832-3765

NH-1SA-ACB-BLU Instr
090104JS



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Create Date                     : 2005:06:08 14:27:03-07:00
Modify Date                     : 2005:06:08 14:27:03-07:00
Page Count                      : 2
Creation Date                   : 2005:06:08 21:27:03Z
Mod Date                        : 2005:06:08 21:27:03Z
Producer                        : Acrobat Distiller 5.0 (Windows)
Author                          : jasend
Metadata Date                   : 2005:06:08 21:27:03Z
Creator                         : jasend
Title                           : Visio-NH-1SA-Code Blue, NHR-7A-CB Instr.vsd

EXIF Metadata provided by EXIF.tools