AirTies Wireless Networks AIR4930 Home Wi-Fi Solution Kit User Manual Statement

Download:
Mirror Download [FCC.gov]
Document ID	3772394
Application ID	H6WSA47JcSDF1RAANDLTWw==
Document Description	User Manual Statement
Short Term Confidential	Yes
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	12.33kB (154135 bits)
Date Submitted	2018-03-07 00:00:00
Date Available	2018-09-04 00:00:00
Creation Date	2018-09-05 14:26:44
Producing Software	GPL Ghostscript 9.21
Document Lastmod	2018-09-05 14:26:44
Document Title	User Manual Statement
Document Creator	Adobe InDesign CC 2017 (Macintosh)

PRINTING COLOR
C:0
M:85
Y:100
K:0
C:0
M:0
Y:0
K:100
FCC Statement of Air 4930 (Printed Material Specification
Dimension after binding
Pages
Cover Printing Color
Material
Pages Coating
Binding & Folding Process
Output lpi
Tolerance
AirTies Part Number
A6 (105x148mm)
One page / Double sided
colour printing
105g copperplate paper
varnishing
200 Lpi
L*W:±0,5mm
MP-0000063776
Wireless Regulatory Information
FCC Statement:
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE
FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT
MAY CAUSE UNDESIRED OPERATION.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC CAUTION:
The grantee is not responsible for any changes or modifications not expressly approved by the
party responsible for compliance. Such modifications could void the user’s authority to operate the
equipment.
IEEE 802 11b or 802 11g operation of this product in the USA is firmware limited to channel 1~11.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20 cm between
the radiator and your body. This device and its antennas(s) must not be co-located or operating in
conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter
product procedures. This device is restricted for indoor use.
DFS Statement :
Devices will not permit operations on channels 120-132 for 11a and 11n/a which overlap the
5600 - 5650 MHz band.
SAFETY WARNINGS:
• Do not use this product near water, for example, in a wet basement or near a swimming pool
• Avoid using this product during an electrical storm. There may be a remote risk of electric
shock from lightning.
WARNING
This product contains chemicals known to
the state of California to cause cancer and
birth defects or other reproductive harm.
This product can expose you to chemicals
including lead, which is known to the State
of California to cause cancer and birth
defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov.
MP-0000063776REV09102017
IC Statement :
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must accept
any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts
de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas
produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en compromettre le fonctionnement.
For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of
other channels is not possible.
Pour les produits disponibles aux États-Unis / Canada du marché, seul le canal 1 à 11 peuvent être
exploités. Sélection d’autres canaux n’est pas possible.
This device and it’s antennas(s) must not be co-located or operating in conjunction with any other
antenna or transmitter except in accordance with IC multi-transmitter product procedures.
Cet appareil et son antenne (s) ne doit pas être co-localisés ou fonctionnement en association avec
une autre antenne ou transmetteur.
The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for
harmful interference to co-channel mobile satellite systems.
les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une
utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites
mobiles utilisant les mêmes canaux.
The maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that
the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point
operation as appropriate.
le gain maximal d’antenne permis (pour les dispositifs utilisant la bande 5725-5850 MHz) doit se
conformer à la limite de p.i.r.e. spécifiée pour l’exploitation point à point et non point à point, selon le cas.
IC Radiation Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm between
the radiator & your body.
Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un
environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20cm de
distance entre la source de rayonnement et votre corps.
This radio transmitter has been approved by Industry Canada to operate with the antenna types listed
below with the maximum permissible gain and required antenna impedance for each antenna type
indicated. Antenna types not included in this list, having a gain greater than the maximum gain
indicated for that type, are strictly prohibited for use with this device.
Le présent émetteur radio a été approuvé par Industrie Canada pour fonctionner avec les types
d’antenne énumérés ci-dessous et ayant un gain admissible maximal et l’impédance requise pour
chaque type d’antenne. Les types d’antenne non inclus dans cette liste, ou dont le gain est supérieur
au gain maximal indiqué, sont strictement interdits pour l’exploitation de l’émetteur.
The Following antenna table applies to Air 4930 product :
Model
Brand Name
Gain (dBi)
Antenna Type
Connector 2.4GHz
5GHz
Band 1
(5150-5250
MHz)
Band 2
Band 3
(5250-5350 (5470-5725
MHz)
MHz)
Band 4
(5745-5825
MHz)
PCB Antenna(x2)
1,7
PCB Antenna(x4)
1,5
2,3
1,9

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Create Date                     : 2017:10:09 15:55:33+03:00
Creator                         : Adobe InDesign CC 2017 (Macintosh)
Modify Date                     : 2018:03:05 17:28:02+08:00
Language                        : tr
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30
Instance ID                     : uuid:c59d537c-22dc-44d1-a85d-32d75e09b8c9
Original Document ID            : adobe:docid:indd:0af564b8-090e-11e0-8438-af2c1e8e75fa
Document ID                     : xmp.id:07fd590a-c2a1-4ea2-a687-b9aabb8d0d3e
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:053b7d11-3028-4c79-bafd-eefa65b18298
Derived From Document ID        : xmp.did:D25D85518378E31198C4B31173B7165D
Derived From Original Document ID: adobe:docid:indd:0af564b8-090e-11e0-8438-af2c1e8e75fa
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2017 (Macintosh)
History Changed                 : /
History When                    : 2017:10:09 15:55:33+03:00
Metadata Date                   : 2018:03:05 17:28:02+08:00
Creator Tool                    : Adobe InDesign CC 2017 (Macintosh)
Format                          : application/pdf
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
Page Count                      : 3

EXIF Metadata provided by EXIF.tools