Airspan Communications 255AS Airsynergy Compact Outdoor Pico Base Station User Manual Additional Statements O2J 255AS

Airspan Communications Limited Airsynergy Compact Outdoor Pico Base Station Additional Statements O2J 255AS

Contents

Additional Use Manual Statement

Download: Airspan Communications 255AS Airsynergy Compact Outdoor Pico Base Station User Manual Additional  Statements  O2J 255AS
Mirror Download [FCC.gov]Airspan Communications 255AS Airsynergy Compact Outdoor Pico Base Station User Manual Additional  Statements  O2J 255AS
Document ID2049055
Application IDBTUuK1CjVC6l9ZP+F9hZtg==
Document DescriptionAdditional Use Manual Statement
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize3.32kB (41548 bits)
Date Submitted2013-08-20 00:00:00
Date Available2013-08-21 00:00:00
Creation Date2017-10-26 05:29:45
Producing SoftwareGPL Ghostscript 9.18
Document Lastmod2017-10-26 05:29:45
Document TitleAdditional User Manual Statements (O2J-255AS)
Document CreatorPDFCreator Version 1.4.1
Document Author: Charlie

Additional Airsynergy User Manual Statements
Airsynergy basestation, FCC ID: O2J-255AS, operating on frequencies 2503-2687 MHz
(5 MHz channels) or 2506-2686 MHz (10 MHz channels).
Model numbers A25a, U38 and A25c
Federal Communications Rules for operation in USA
The correct setting of the following Base Station parameters in Netspan, are critical to
the correct operation of equipment in compliance with the rules detailed in 47CFR27:
•
•
•
Transmit Power
Transmit Frequency
Channel Bandwidth
Any attempt to alter these parameters outside those permitted by the Netspan software or the
operator license could be a violation of that license
Transmit Power / Tune-up
Transmit power is set using the Netspan management software during install /commissioning.
The unit may be set to transmit with a power of up to 30 dBm at each antenna port when
connected to cross polarised antenna with maximum gain of 18dBi.
FCC and Industry Canada RF Exposure Requirements
FCC Maximum Permissible Exposure (MPE) limits for equipment operating in the
frequency range 1500 – 100,000 MHz is 1.0 mW/cm2.
Following installation and commissioning, the safe distance from the antenna is the
greater of:
20cm
Or
r cm, where r = √ (PG/4πS)
P: power input to antenna(s) in mW
G: numeric gain of antenna relative to isotropic radiator
S: power density in mW/cm2 = 1 mW/cm2
The device has two antenna ports, so safe distance from the antenna shall be the greater
of:
20 cm or √ (2*PG/4πS)
Which gives
20 cm or √ (0.16*P*G) cm.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Print high-res
Page Count                      : 1
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:c5d15994-08e5-11e3-0000-8ef50c697f03
Producer                        : GPL Ghostscript 9.05; modified using iTextSharp 5.2.1 (c) 1T3XT BVBA
Keywords                        : ()
Modify Date                     : 2013:08:16 16:41:11+01:00
Create Date                     : 2013:08:16 16:40:53+01:00
Creator Tool                    : PDFCreator Version 1.4.1
Document ID                     : uuid:c5d15994-08e5-11e3-0000-8ef50c697f03
Format                          : application/pdf
Title                           : Additional User Manual Statements (O2J-255AS)
Creator                         : Charlie
Description                     : ()
Author                          : Charlie
Subject                         : 
EXIF Metadata provided by EXIF.tools
FCC ID Filing: O2J-255AS

Navigation menu